Clock per Clock Comparison: 680i vs 975X

Printable View

Show 100 post(s) from this thread on one page

03-16-2007, 11:28 AM
BenchZowner

Clock per Clock Comparison: 680i vs 975X

As ideas keep flowing in my head ( lol ), I thought I should write a article about clock per clock performance of the 4 main contenders in the C2D era :D

Since most people here are overclockers, or should I say benchmarkers ( shows the relation to benchmark numbers, etc ;) ) I thought I should give this part of the article a small ( non visual quality ) presentation.

Information:
I've tested the Intel 975X Chipset & the nVIDIA nFORCE 680i chipset in various benchmarks, by using the same ( exact ) configuration ( software & hardware-wise ) on both tested motherboards.
I've matched ( where applicable ) the memory timings ( and sub-timings ofcourse ) and clock frequencies of both configs. ( the same parts were used on both motherboards )

=======================
Test System
=======================
Motherboard: Asus Striker Extreme ( 680i ) & Asus P5W DH Deluxe ( 975X )
CPU: Intel Core 2 Duo Extreme X6800 ( @ 3.5GHz / 350MHz x 10 )
RAM: OCZ PC2-6400 S.O.E. Urban Elite 2GB Kit
VGA: Twintech GeForce 8800GTX
HDD: Maxtor MaXLine III 300GB

=======================
Configurations
=======================
FSB: 350MHz ( QDR-1400 )
DRAM/FSB: 1:1
RAM Mode: Linked
RAM Sync: Synchronized
RAM Timings:http://weboperative.com/OCIDB/albums...033/memset.jpg
HyperPath 3 - GPUex - LinkBoost: Disabled
BIOS Versions: Striker1002 - P5W1602
OS:Windows XP Service Pack 2
Drivers:Intel Chipset Software Installation Utility v8,1,1,1010 - nVIDIA nFORCE v9.53 - nVIDIA ForceWare v97.92

===============================
The results
===============================

http://weboperative.com/OCIDB/albums.../SuperPi1m.jpg

http://weboperative.com/OCIDB/albums...SuperPi32m.jpg

http://weboperative.com/OCIDB/albums...Mark2001SE.jpg

http://weboperative.com/OCIDB/albums.../AquaMark3.jpg

http://weboperative.com/OCIDB/albums.../3D_Mark03.JPG

http://weboperative.com/OCIDB/albums.../3D_Mark05.JPG

http://weboperative.com/OCIDB/albums.../3D_Mark06.jpg

http://weboperative.com/OCIDB/albums...xus-PiFast.jpg

http://weboperative.com/OCIDB/albums...033/wPrime.jpg

SuperPi 32M Screenshots
http://weboperative.com/OCIDB/albums...al_superpi.jpg

Edit:
The tests were run ( x times ) & averaged:
3D Mark2001SE = 2 times
3D Mark03 = 2 times
3D Mark05 = 1 time
3D Mark06 = 1 time
AquaMark 3 = 3 times
SuperPi 1M = 5 times
SuperPi 32M = 1 time
Hexus Pi-Fast = 2 times
wPrime = 2 times
03-16-2007, 12:34 PM
krampak

Maybe I've missed it.. 680i is running at 1T or 2T ?

I did a similar comparison but with more mobos and more programs, you can check it here. Both 680i are running at 2T.
03-16-2007, 12:36 PM
BenchZowner

Quote:

Originally Posted by krampak

Maybe I've missed it.. 680i is running at 1T or 2T ?

You mean Command Rate ( also known as Command Per Clock ).
It's in the configuration section.
Running 2T Command Rate on both chipsets.

Although, I plan on comparing both chipsets at their best possible settings later on ;)
03-16-2007, 12:47 PM
hawtrawkr

Quote:

Originally Posted by BenchZowner

Although, I plan on comparing both chipsets at their best possible settings later on ;)

thats what ill be waiting to see. good to see a clock by clock comparison though.
03-16-2007, 01:02 PM
krampak

Quote:

Running 2T Command Rate on both chipsets.

Does 975X have Command Rate options ? I guess not.
03-16-2007, 01:06 PM
BenchZowner

Quote:

Originally Posted by krampak

Does 975X have Command Rate options ? I guess not.

There isn't a Command Rate option available on most 965P/975X motherboards.
They default to 2T :)
03-16-2007, 01:21 PM
sdumper

I hate to mention the obvious but at this point it is widely known that for the 680i to match or beat a 975x based mobo you need to go 1t and trim the timings. Also note that your not going to get much beyond 400/1600 bus speeds on the 975x last and most important to anyone using the 680i boards Sli is a deciding factor and your not going to run the 8800gtx cards in Sli on 975x boards even with the modded drivers.
03-16-2007, 01:40 PM
Speederlander

Do these runs with a quad, and the better stability of 975 boards will allow higher overclocks and better results on the multithreaded tests. When you test to their limits.
03-16-2007, 02:04 PM
SSXeon

Interesting, nice comparison. :D
03-16-2007, 02:16 PM
BenchZowner

Quote:

Originally Posted by sdumper

I hate to mention the obvious but at this point it is widely known that for the 680i to match or beat a 975x based mobo you need to go 1t and trim the timings.

That's right, but would this make it a fair comparison ? Nope.
Max performance per clock between these chipsets will be 'investigated' in another part of this article :)

Quote:

Originally Posted by sdumper

Also note that your not going to get much beyond 400/1600 bus speeds on the 975x

Depends on your Vmch and luck.
I got a 475MHz stable P5W DH Deluxe without any mods ( stock, rev. 1.03g, 1.85Vmch ).

Quote:

Originally Posted by sdumper

last and most important to anyone using the 680i boards Sli is a deciding factor and your not going to run the 8800gtx cards in Sli on 975x boards even with the modded drivers.

Yeah, but when it comes to single-card benchmarking...even a 100 points gain can be negligible ( in benchmarking )
03-16-2007, 02:18 PM
Kristoferr

Tests prove what we all know already :)
I975x is faster if it comes CR 2T and Single graphics card.

If you want to go rof SLI and you have DDR that does ddr800 with tight timings and 1T (like micron fatbody) then go for 680i

Its simple like that!
Cheers!
03-16-2007, 02:28 PM
crazyea

Quote:

Originally Posted by BenchZowner

I got a 475MHz stable P5W DH Deluxe without any mods ( stock, rev. 1.03g, 1.85Vmch ).

You mean the P.O.S. in your sig? LOL
03-16-2007, 02:32 PM
safan80

Quote:

Originally Posted by crazyea

You mean the P.O.S. in your sig? LOL

some people expect too much.
03-16-2007, 04:38 PM
sdumper

Quote:

Depends on your Vmch and luck.
I got a 475MHz stable P5W DH Deluxe without any mods ( stock, rev. 1.03g, 1.85Vmch ).

You did better than I did the best I could do with my mods was 450 bootable and 465 with clockgen.

I still have it collecting dust in my basement...dont ask :(

In all honesty I love my striker for Dual Core but not for Quad.
03-16-2007, 10:59 PM
fhpchris

re-run the 680i @ 600 mhz on ram :P
03-16-2007, 11:14 PM
BenchZowner

Quote:

Originally Posted by fhpchris

re-run the 680i @ 600 mhz on ram :P

Will do so, when...the Fed-Ex guys decide to push their speed-limits & deliver my long awaited package :P
03-17-2007, 05:32 AM
Aljechin

Quote:

Originally Posted by BenchZowner

Will do so, when...the Fed-Ex guys decide to push their speed-limits & deliver my long awaited package :P

Nice comparision Bench, don't let you get distracted by all the
BUT BUT BUT-Lamers. Its a clock-to-clock-comparision,
everything else is another slice of bread.
03-17-2007, 11:40 PM
Ten

Thx for this comparison, last week i went back to my 975x chips and im happy so far:)
03-18-2007, 06:34 AM
Sir Lancelot

Your effort to make this comparison is something to be thankfull for, but I don't think that it will help anybody.

To be a real comparison between both chipsets, you've should compare the best that the 975 can do and the best thew 680i can do.

I don't see the objective of comparing MHz-by-Mhz at 350MHz FSB, when most of the 975 can do 400MHz and the 680i can do more than 450...

After reading your test, my doubt is still the same: at the end, which boards are more powerfull? The 975 ones or the 680i ones?...

Hasta!
03-18-2007, 06:45 AM
STaRGaZeR

Quote:

Originally Posted by Sir Lancelot

Your effort to make this comparison is something to be thankfull for, but I don't think that it will help anybody.

To be a real comparison between both chipsets, you've should compare the best that the 975 can do and the best thew 680i can do.

I don't see the objective of comparing MHz-by-Mhz at 350MHz FSB, when most of the 975 can do 400MHz and the 680i can do more than 450...

After reading your test, my doubt is still the same: at the end, which boards are more powerfull? The 975 ones or the 680i ones?...

Hasta!

CLOCK-PER-CLOCK PERFOMANCE means anything to you?
03-18-2007, 06:47 AM
RealTelstar

The bench is fair, he is comparing both chipsets doing 2T.

But i second the request of Sir Lancelot. But do it at over 400mhz of FSB. For istance I dunno if the nv680i increases latencies like the i965.
03-18-2007, 07:11 AM
Sir Lancelot

Quote:

Originally Posted by STaRGaZeR

CLOCK-PER-CLOCK PERFOMANCE means anything to you?

Yes it does...and it would make sense if both chipsets maxed out at the same fsb...

ARE YOU BLIND?...cos I'm not...
03-18-2007, 07:16 AM
Big_Sam

I doubt only of correctness of result in 03Mark.
680i should be much more slowly in this test.
I think that it was necessary to take weaker videocard or faster CPU.
03-18-2007, 09:59 AM
STaRGaZeR

Quote:

Originally Posted by Sir Lancelot

Yes it does...and it would make sense if both chipsets maxed out at the same fsb...

ARE YOU BLIND?[/SIZE]...cos I'm not...

NOT? Sure? As already said in this thread, this is a comparison with the SAME settings and hardware. If you want to flame, go and open one called "Tell me the best possible overclock of 975 and 680i". And there, people will say you that it depends of lucky in most cases. Mi BX2 at 450FSB is rock stable, 480FSB bencheable. So don´t come here to cry...
03-18-2007, 10:09 AM
Sir Lancelot

Quote:

Originally Posted by STaRGaZeR

NOT? Sure? As already said in this thread, this is a comparison with the SAME settings and hardware. If you want to flame, go and open one called "Tell me the best possible overclock of 975 and 680i". And there, people will say you that it depends of lucky in most cases. Mi BX2 at 450FSB is rock stable, 480FSB bencheable. So don´t come here to cry...

Hey hey hey...I didn't flame any thing...you're the one who started talking with the biggest letters possible!

I never said that the bench was unfair...not precise...or meaningless...got it? (maybe i need bigger font...:stick: :stick: )

What I just said...and I believe it's not stupid, as much as you would like it to be, is that comparing MHz-by-MHz does not mean that 975 is faster, as they limit much earlier than 680i.

I also have a 975x based mobo that can do 450MHz stable, and I didn't came here bragging about it!

So, if asking for a comparison between a 975 @ 420MHz FSB and a 680i @ 500MHz is stupid in your understanding...you better sell your PC and buy a laptop, because it seems that you're a little bit out of the game...

Again, my objective is not flamming...is just to have a better undersdtanding of the systems out there, cos the only one I know about is 975x and I'm curious about other systems as well...

P.S- Is all that flame conversation just because I'm portuguese and you're spanish? Cos if it is...this is not the right place to bring your historical frustrations...And because of that, I wont feed this thread any longer, as I explained myself very well and there's nothing more I can add...

Show 100 post(s) from this thread on one page