G.Skill F2 6400CL5D 2GBNQ - testing

Printable View

Show 100 post(s) from this thread on one page

02-28-2007, 10:04 AM
ahmad

G.Skill F2 6400CL5D 2GBNQ - testing
http://www.ncix.com/products/index.php?sku=21164

I can't find much info on these kits, so I decided I'll share my results.

This time around I decided to not spend money on high end parts until I was comfortable enough with this. My last 3 or 4 expensive kits were all OCZ, so I decided to try stuff I have never tried before. I got this stuff on sale for about $220 CDN which is about $190 USD. Is it worth the money? Lets find out.

Setup:

E6300
Gigabyte DS3 (F10 bios)
G.Skill F2-6400CL5D-2GBNQ
OCZ 520W

Sticks are rated 400Mhz 5-5-5-15 @ 1.8v.

Starting with the basics: 400MHz 4-4-4-13 @ 1.9v
http://img.techpowerup.org/070228/400-4-4-4845.jpg

Not bad. 100% stable too.

Something more interesting: 450MHz 4-4-4-13 @ 2.1v
http://img.techpowerup.org/070228/450-4-4-4.jpg

DDR900 and appears to be very stable. Can't say 100%, but it looks good. Here is another run, maybe this one is bugged?
http://img.techpowerup.org/070228/450-4-4-4-good.jpg

This one is for fun: 460MHz 4-4-4-13 @ 2.1v
http://img.techpowerup.org/070228/460-4-4-4.jpg

Unstable. I got a shot at 465MHz but windows rebooted when I opened paint.

This is another suicide shot, but at 470MHz 4-5-4-13 @ 2.1v
http://img.techpowerup.org/070228/hack2.jpg

My highest 100% stable FSB appears to be this for now (6x multi - 464MHz):
http://img.techpowerup.org/070228/464 4-5-5.jpg

Is it worth it? I have no idea, you tell me :). As far as performance goes, I think from 400Mhz 5-5-5-15 to 470MHz 4-5-4-13 is not a bad deal. My 24/7 will most likely be 450MHz 4-4-4-13.

Perhaps someone here can figure out what kind of ICs these have from the information I have given? It would be nice to know.

Also check out: http://www.xtremesystems.org/forums/...d.php?t=134982 - much better results and someone said PROMOS.

Random notes:
- tRAS appears to make a huge difference when it comes to max FSB. When set to 12 I get no post with any timings. Maybe its a DS3 thing, but it looked like it was tied in with the sb.
- More than 2.1v resulted in nothing.
- MCH voltage was at 1.3v.. 1.2v was only sufficient up to 440MHz.
- I had to keep PCI-E freq at 104MHz for 430MHz+ and 105MHz for 450MHz+. This one has got to be a DS3 issue.
- CAS5 allowed for a much lower FSB than CAS4. I could boot upto 485MHz on CAS4, CAS5 is no where near that.
- I would test more, but vdroop is much too great for now.
02-28-2007, 11:04 AM
skindogg

Do you know what rev # your DS3 is?
02-28-2007, 11:22 AM
ahmad

Rev 3.3
02-28-2007, 01:22 PM
ZoLKoRn

Quote:

Originally Posted by ahmad

[url]
Is it worth it? I have no idea, you tell me :). As far as performance goes, I think from 400Mhz 5-5-5-15 to 470MHz 4-5-4-13 is not a bad deal. My 24/7 will most likely be 450MHz 4-4-4-13.

Perhaps someone here can figure out what kind of ICs these have from the information I have given? It would be nice to know.

Also check out: http://www.xtremesystems.org/forums/...d.php?t=134982 - much better results and someone said PROMOS.

http://www.xtremesystems.org/forums/...1&d=1172697104

as-sa-la-mu-a-lai-gom ahmad ,Yah... it's PROMOS chip same you think, and my result on P5B-Deluxe is i can run maximum at 1000MHz CL 5-5-5-15 , 2.45V Vdimm. Well.. i think it some choice for value memory is not bad :toast:

some result....

http://www.overclockzone.com/zolkorn...CL5/Clip_3.jpg

http://www.overclockzone.com/zolkorn...CL5/Clip_6.jpg

http://www.overclockzone.com/zolkorn...CL5/Clip_5.jpg

http://www.overclockzone.com/zolkorn...CL5/Clip_4.JPG

http://www.overclockzone.com/zolkorn...CL5/Clip_2.jpg
02-28-2007, 08:10 PM
ahmad

Walaikum Assalam :)

Hey you got much better results than me too. Thats great to see. I think I need to do more tweaking.
03-01-2007, 06:00 PM
Riverna

Hey,

my 2GBNQ runs with 470mhz 4-4-4-12 @ 2.25v and 533mhz 5-5-5-15 @ 2.25v. :toast:
03-01-2007, 06:44 PM
ahmad

You have the P5B.. nice. Any mods on your board?
03-01-2007, 09:34 PM
Super strokey

I just picked these sticks up with a few other things, will be trying them in a p5n-e with a e6400. Will post results when they get here. Ordered a new stacker case as well. THis ram was on sale 199.99 at anitec, same with the coolermaster stacker 830. Really excited here lol
03-01-2007, 10:14 PM
Okda

Quote:

Originally Posted by ZoLKoRn

as-sa-la-mu-a-lai-gom ahmad

sorry for :off:

but i must say that this is the most funny way it can be written
03-01-2007, 10:59 PM
ZoLKoRn

Quote:

Originally Posted by SaFrOuT

sorry for :off:

but i must say that this is the most funny way it can be written

I'm sorry SaFrOuT, i don't know is how should written it or true written on eng.

ps. I don't to intend is it funny ,because i'm 's Muslim too :)
03-01-2007, 11:31 PM
Plester

1 Attachment(s)

i like this cheap ram.
03-02-2007, 04:02 AM
ahmad

Good luck with your sticks...

Quote:

Originally Posted by Super Stokey

I just picked these sticks up with a few other things, will be trying them in a p5n-e with a e6400. Will post results when they get here. Ordered a new stacker case as well. THis ram was on sale 199.99 at anitec, same with the coolermaster stacker 830. Really excited here lol

I know. He just doesn't realize it :D. There is no correct way of writing it, you just write it as it sounds.

Quote:

Originally Posted by ZoLKoRn

I'm sorry SaFrOuT, i don't know is how should written it or true written on eng.

ps. I don't to intend is it funny ,because i'm 's Muslim too :)
03-02-2007, 04:08 AM
Okda

Quote:

Originally Posted by Plester

i like this cheap ram.

:with:

QFT
03-02-2007, 04:25 AM
kemo

Quote:

Originally Posted by ZoLKoRn

I'm sorry SaFrOuT, i don't know is how should written it or true written on eng.

ps. I don't to intend is it funny ,because i'm 's Muslim too :)

we write it as Salam Alaikum or "alsalamu 3alikom"
but no problem as long as people can understand it :)
03-02-2007, 04:45 AM
ineedaname

If u guys want cheap ram u could get Kingston PC5400 1gb Value Ram.
It costs $87 CDN here.

Take a look.

http://xtremesystems.org/forums/atta...1&d=1171706010
03-02-2007, 09:14 AM
Super strokey

yeah but does value 5400 clock at all? I have more faith in gskill than in value kingston

also it looks like these are promos, how much vdimm do they like?
03-02-2007, 01:57 PM
ahmad

87x2 is almost 180 CDN. So not much cheaper... Thats some crazy divider you are using there.
03-02-2007, 05:41 PM
ahmad

1 Attachment(s)

Plester, Zolkorn or Riverna can you please post screenshots of memset please. I have gotten it to boot windows at 500MHz, but its not stable.

EDIT: Ok I found the magic timing. I still need those screenshots to make my life easy :D

EDIT#2:

I listened to Plester's advice and set all other timings to auto in the BIOS of the DS3. And I got this on the second try:

5-5-5-16 was no go. 5-5-5-17 at 2.2v was go :)

But auto made the timings very ugly. I need to work on those for the time being.
03-02-2007, 08:02 PM
ineedaname

Quote:

Originally Posted by Super strokey

yeah but does value 5400 clock at all? I have more faith in gskill than in value kingston

also it looks like these are promos, how much vdimm do they like?

What do you mean does it overclock at all?
Did you even look at the pic? its at 480.
I've taken it to 490 4-4-4-12 2.3v

That's more than these g.skills.

Quote:

Originally Posted by ahmad

87x2 is almost 180 CDN. So not much cheaper... Thats some crazy divider you are using there.

Yea it was on a 650i board, Asus P5N-E SLI so it was on unlinked mode.
03-02-2007, 11:37 PM
ZoLKoRn

Quote:

Originally Posted by ahmad

Plester, Zolkorn or Riverna can you please post screenshots of memset please. I have gotten it to boot windows at 500MHz, but its not stable.

EDIT: Ok I found the magic timing. I still need those screenshots to make my life easy :D

EDIT#2:

I listened to Plester's advice and set all other timings to auto in the BIOS of the DS3. And I got this on the second try:

5-5-5-16 was no go. 5-5-5-17 at 2.2v was go :)

But auto made the timings very ugly. I need to work on those for the time being.

yah... i'll post it in the next time, because is now it put on P5B-deluxe and timing is i set from biso p5b.... 5-5-5-15-6-42-5-13-7-15 , 2.45V :)
03-03-2007, 05:27 AM
Super strokey

Quote:

Originally Posted by ineedaname

What do you mean does it overclock at all?
Did you even look at the pic? its at 480.
I've taken it to 490 4-4-4-12 2.3v

That's more than these g.skills.

Yea it was on a 650i board, Asus P5N-E SLI so it was on unlinked mode.

The pic must not had loaded up by the time i posted. I still dont have the greatest faith in generic rams though.
03-03-2007, 11:47 AM
ahmad

Kingston is not what I would consider to be generic :)
03-03-2007, 11:56 AM
Plester

tried tighnening up timings at ddr1000 with my GBNQs and can do about 350% w/ memtest at 4-4-5-15 (2.2v) befor it kicks out the first error. just tried ddr900 at 4-4-4-12 and fully stable there.

2gbb kit is $164 at the egg now.
03-03-2007, 06:03 PM
Super strokey

Quote:

Originally Posted by ahmad

Kingston is not what I would consider to be generic :)

Yeah i guess hey lol, im so used to Heatspreaders now days i almost expect them on ram thats any good, even though there is no real reason for them. Sigh oh wells, mines shiny lol
03-06-2007, 09:19 AM
Plester

1 Attachment(s)

this is the happy place for these sticks - run em 24/7 at this speed and they are stable. $164/2gb kit at newegg.

Show 100 post(s) from this thread on one page