View Full Version : Liquid Cooling
- Loop Help
- Quieter fan's, what happened to the stickies?
- EVGA X58 Blocks By Bei
- D5 Vario speed?
- Maze 4 work on a 4830??
- Blocks that fit the DFI UT X58-T3eH8
- Feser One Cooling Liquid? Mix or no mix?
- KoolanceDRAM Cooler for MB-ASR2E
- questions about HEATKILLER Rev3.0
- Cheapest set up
- External water cooling kit
- Loud Noises!
- Enzotech 1366 Retention kit works with D-tek Fuzion V1
- mx-2 or lm for each block in de loop
- WC for my PC
- Where can I find cable connectors-led connectors
- I am Xtreme - upgraded XS access
- FC WB for 4850x2 yet?
- Apogee GTZ Backplate Question
- WC thoughts on current config
- Question about a connection
- question on sleeving and watercooling
- Aqua Computer 4870x2 block
- Radiators with fans in push pull
- CPU Mag mention
- BigNg +15 fans
- MCR-QP Stackable Radiator Series Released
- about the i7 temperature
- My first WC System Build !
- In need of help for buying parts
- two pumps, one loop
- New to WC!
- someone have the XPSC Laing DDC Reservoir?
- mcp655 and the pmp-450
- Copper colored coolant?
- How do I know I am a pro modder/H20'er
- Standoff feet
- Tweak my WC setup / suggestions!
- Average, good loop length ?
- DD MPC-CPU LGA1366 v. EK Supreme Lt??
- BEST full cover block for the GTX280?
- Tell me if these WC temps sound right.
- Clean 3603 on the outside
- Correct waterblock thermal paste/compound
- Help required regarding MCR320 accessories
- gtx 260 non full coverage
- High Perfomance Fan - SilenX Ixtrema
- question on d5 threading
- two loops or one?!
- *PICS* *VIDEO* HELP! Xtreme problems... Video card does not respond :(
- to add rad or not to add?
- Can I top off my system with Distilled water?
- GTX 295+ with koolance WB and back plate
- XSPC DDC mod top, must it be PERFECTLY centered?
- Mobo advice needed
- Bitspower, Where?
- Watercooling Maintenance
- Is This GPU A Reference PCB ??
- Can your pet make a rad grill cover?
- some advice for my WC?
- Pushing Air Through Radiator Into Case?
- XSPC RX360 radiator review
- XSPC DCC3.2 top
- MCP350 vs 355
- Temp Sensor Placement
- Fan Controller Options
- How do you hook up multiple fans to a fan controller?
- Question about EK Supreme mounting screws
- looking for those M4 Screws
- Water cooling 70X2+Q9550 @ 1200
- TYGON R3603 best tubing for kinking?
- Is this system gonna have enough flow?
- Best way to cut Themal Pad for GPU waterblock! HELP!!
- From Rezerator 1+ to Aquaduct 720xt or something else ???
- QUICK need advice on my case!!!
- 4870x2 Blocks
- Which Cathode WONT break after 5 mins of use!?!?!
- Worth the Upgrade to Thermochill or Feser?
- First Time Water Cooling Suggestions w/ setup
- Pump ran dry
- Can't Decide
- Koolance 1/2" QD on 7/16" tubing
- Magicool Pro Slim Profile on i7 920
- Recommend cases for a triple rad
- What metals mix & what don't
- Is top vertical mounted rads hard to bleed?
- Fan Direction for Internal Rad.
- Koolance RAM-35
- EK Supreme Plexi 3mm UV LED Effect
- Lianli V2000 WC airflow help
- BP 90's between MOSFET and CPU blocks
- GTX260 55nm cooling options
- full cover block discussion for the hd4870x2
- Fluid XP Strikes Again lol?
- Best way to secure tubing on barbs?
- Alphacool new cpu waterblock!
- Not Completely Solved: Weird Video Issue After Installing FCB on HIS 4870
- HELP: Swiftech GTZ - snap, crackle and pop
- Aqua Computer i7 WB
- How to create a fan cable that connects to multiple fans on 1 channel!
- Two rads, one loop = 1-2c?
- Liquid cooled TEC booster on air cooler
- So I finally set my system up and... High Temps! what the..
- ? on Loop
- First Water Cooling Loop
- I7 waterblocks Version2 (Ek Supreme LT | Koolance350 | Dtek Fuzionv2 | Swiftech GTz)
- EK Waterblocks. Delrin Acetal or Clear Plexi? Your say.
- rad above res
- Gains with a TOP for a DDC ?
- Ek rampage 2 part 2
- i7 Board, Which one will supported by LC vendor
- Alphacool HF 14 i7 blocks
- Just to confirm, tagan black pearl + top radiator + sli = no
- Pump options.
- Please check parts purchase
- Quick question about DD-Tieton for GTX280...
- Water Cooling: Case and Setup Suggestions
- Someone please make us a washable (removable bottom filter-rad attachment)
- I Need a Good Case Around $200
- Good fans?
- HAF 932 2 x 240mm side mounting
- Radiator advice
- !%^$@# DD-Tieton on GTX280 WTF?!!
- Best Red Led Fans?
- Watercooling for silence help please
- Koolance McLovin has arrived
- are 45's as bad as 90's
- Is the Gigabyte 3D Mercury (water cooled case) compatible with AM3?
- can one use this drill bit on acrylic?
- Best 12cm fans for Magicool Pro II uv radiator
- Cleaning XSPC Res/Top
- Just got my Bitspower AmosII and AmosIII for Asus X58 boards!
- Does UV Coolant/Dye Leave Stain/Residue/Gunk in Watercooling Loops?
- [First WC setup] Need some advice!
- Bitspower Fittings Dimensions ?
- Sleeving Questions: Fans in Serial & 355
- Making my own case
- Bei Feis P6T blocks help...
- Help - Where can i buy Tap 12.7mm ??
- Thermochill PA120.3 + Radbox
- Reservoir confusion
- The "what radiator?" question!
- Compression Fittings
- FullCover blocks for low power consumption cards
- anybody know where to get a few of these?
- Going for a dual loop now- please check my configuration for me before I build
- Cleaning the Swiftech MCRES
- New mcp355/ddc3.2 ?
- Laing DDC bottom holes...
- I am tired of all teh smack talk
- PA 160 price
- Watercooler wish lists
- koolance 350, Delta v3, EK Supreme LT or GTZ ?
- Noise with Laing
- Yet another noob thread... what should I buy and such
- noobie question
- Koolance blocks on Asus Rampage II pix
- OCZ Flex EX Series
- MCR220 enough for a GTX 295?
- Laing DDC covers-housing
- I7 CPU and D-TEK Block
- xspc 4870x2 waterblock w. Compression fittings problem, 45 Degree Rotary the answer?
- GTX285 + EK Water Blocks x 3
- 4850 X2 (2GB) Waterblocks?
- EVGA GTX 285 Waterblock!
- how tight do compression
- DDC mounting options?
- PVC, Norprene or Tygon 7/16" ?
- quick Danger Den fitting question
- TMR XWB-01 Water Block - Moded
- So something bad happened.. Leaks and lack of flow?
- Help requested with Temps and Voltages on 1st WC system
- Leak Testing: How to run pump when 24-Pin not attached to MoBo
- What kind of clocks on an i7-920 under water?
- DFI x58 blocks
- 1 higher speed fan or 2 lower speed
- Swiftech rad paint makeover
- Core i7 920 + GTX 295 radiator
- Viability of a brick & mortar store
- Finiliazing my WC PARTS
- XSPC 4870X2 backplate issue
- 120x38mm Yate Loons D1SL-12D!
- Asus 4870x2 vs Swiftech Caldera
- XSPC 4870 FC Killed my GPU
- Which Rad.?
- AMD 790GX North Bridge Cooling and ASUS M3A78-T
- GTX 295 + WB EK dont start WHY???
- Quick answer!!
- newbie question
- GTX 295 + WB EK dont start WHY???
- Ok, which should I get? Can't decide..
- MCRES Rev1 with Bitspower G1/4 Fittings?
- Core i7, GTX 295 + Quad Radiator with Radbox - anyone tried?
- "Heat Spacer?"
- How to prevent shorting 295GTX when mounting waterblock
- Mounting i7 Water Blocks ... Koolance 350, EK Supreme ?
- placing fill ports/drain ports
- San Ace horizontal placement...
- Worth W.C.-ing NB & SB?
- BP fitting sizes
- My rig at Intel LANfest
- Corrosion - What gets damaged, the copper or the alu? (Both?)
- Who sells the Bitspower-Mini D plug besides performance?
- G3/8" -> G1/4" adapters for PA120.X rads?
- 4870x2 Backplate or Enzotech Copper Ramsinks
- XSPC rad mounting holes
- Stacker 832 Dual Radiator Top Placement GTX295
- Loop configuration
- Asus Rampage Formula Heatblock Question
- Lian-Li PC80 Radiator at bottom?
- Anyone seen test/thoughts of this rad AC Airplex Evo 1080 aquaduct-design
- Dual Loop Water Cooling, help
- Kaze Master problem
- D5 Ek Top/detroit thermo measurements
- lets ALL figure out the fogging of tubing issues!!!
- Led's on Koolance GTX295 block don't light up....
- Barbs or compression? :)
- Thinking of changing my setup... Will this tubing setup work better?
- 1/2" or 7/16"?
- Applause For PPC's & Sidewinder & A Flame for the EGG!
- Quick question. Feser or TFC Tubing 1/2x3/4 Good?
- xspc 260 block
- 2 Pump RPM Sensors, can combine to 1?
- 4870 x2 water block questions
- loop question
- SLi water cooling bridge
- EK Supreme, replacing mounting plate?
- Lian-Li Radiator Mounts ** PLEASE MERGE WITH ORIGINAL POST - NO IDEA HOW THIS HAP'ND
- Lian-Li Radiator Mounts
- Liquid Cooling with high Temp (???)
- Advice Needed on Compression Fittings
- Help me diagnose high temps...
- "n00b" question regarding EK Anti Cyclone Add On
- Parts came, wrong order, will it work?
- w000t. First Sindwinders order today
- Best Triple & Dual Rad for this....
- MCP655 with EK D5 Rev 2 top?
- In need of some direction, new build, new person.
- Whats happens when i go to sidewinders I find....
- Fuzion V2 Nozzles Compared - Core 2 Quad
- Fan Spacing on Feser rads?
- Avoid these 90 fittings
- Performance on 2 stacked MCR320?
- Koolance CPU-350AC, best i7 cooler?
- (UN)Designs 3X3 Grills
- Calling<"Darth Beavis">Urgent Assistance needed Please!
- Best Triple/Dual Rads for Low Speed Fans (50CFM)
- Which rad goes where?
- EVGA gtx 285 w/ FC block question
- 3 Radiators too much?