2.8v run DDR600 5-3-4-2.5
2.8v run DDR600 5-3-4-2.5
Anyone have any luck with these with Dual Channel on a Skt 939 mobo (preferably an AV8)?
Anyone have this ram with s939 mobo?
Which timings at 225Mhz?
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
Can somebody with this memory and Intel system confirm is this ram capable of running @ 270 @ 2.5/3/3/6 ?
.:If It Isn't Broke, Overclock It!:. .:Overclock It Til It Bleeds!:. .:If you can read this, then you aren't "well" Overclocked yet...!!! :.
hmm, just me or is qk4722 mem score a bit low, should be 4400+ at that speed.
A64 2800+ @ 292x9 1:1 ¤ DFi NF3 250GB ¤ Adata Vitesta PC4000 ¤ Club3D 9800PRO @ 450/375 ¤ Antec TC 550w ¤ Mach I
SiSoftSandra
i wanna see DDR666
would be nice 3.2EE@250fsb with P4C800-E upclocked 3:4 with ram @ DDR666 hehe
---
I think on a FX-53 is better
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
256MB TCCD 2.8v can run DDR660 !
DDR644 run 3d01
OMG
How many volts? 3.2?
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
DDR660 at 2.8vOriginally posted by Juspriss
OMG
How many volts? 3.2?
512MB DDR700 at 3v
Great!
Nice job m8 !
And with the 512 sticks?
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
Holy Shnikeys.
Had to save the screenshot of DDR700
Nice work!
Less is more.
Very nice MHz numbers there
Thanks for the 3DMark data too!
Running with slow timings seems to give quite a hit in performance if compared to 2-2-2-5 timings. Take a look at the 3dmark2001 score and Game Test 3 - Lobby hi and low results (these are the system speed/real world bandwidth indicators).
2577MHz, 8x322, 1:1 3-4-4-8:
Lobby Low = 345.3fps
Lobby Hi = 157.7fps
2394MHz, 9x266, 1:1 2-2-2-5:
Lobby Low = 354.7fps
Lobby Hi = 159.3fps
2528MHz, RAM @281MHz 2-2-2-5, R9800XT:
Lobby Low = 361.0fps
Lobby Hi = 172.2fps
Last edited by macci; 08-14-2004 at 03:08 AM.
Havent seen you in a while Macci, been busy and with what? Nice showing how bad ras-cas4 is! Even bh5 at 266fsb will blow away any 320+ fsb high latency ram, especially if cpu Mhz is constant!
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
but how many people have the ram or the volts to do 266fsb 2-2-2-5 .... most poeple can give ram 2.8v looks like brilliant overclocking ram for the masses .... so where are those dual channel benchies !!
The Collectables Section
Originally posted by Kanavit
Nvidia acquired SLI because alot of x-nvidia employees are working for nvidia now.
Originally posted by Geforce4ti4200
speculation disagrees with you.
dont think its possible dual channel
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Anyone w/ BH5/3700EB ram, good A64 mobo and DDR booster or modding skills.but how many people have the ram or the volts to do 266fsb 2-2-2-5 ....
266 on A64 board ain't that difficult. And it seems that 250ish 2-2-2-5 is enough to match 3-4-4-8 stuff at 320 (when CPU MHz is equal)..
my point exactly. My friend wasnt kidding when he said dont even think of pc4200 ram. My plan was to grab some pc4200 and try to get high 200s or even 300fsb without vmod, he said you might as well run bh5 at 220-230fsb at 2.9v and get equal or better performance
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
sorry not acually ddr700Originally posted by qk4722
DDR660 at 2.8v
512MB DDR700 at 3v
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
DFI NF3-250 LanParty UT A64 3200 1m DTR @2550(10x255) - mushkin 222 -3dmark01 - 26424
Shuttle SN85G4 V2 - A64 3200 1m @2525(10x252) - mushkin 222- 9800pro -3Dmark01 - 26379
DFI Ultra B - 2600+ Mobile@2604(10.5x248) - mushkin 222 - 9800pro - 3Dmark01 - 21445
Abit NF7 - 2600+Mobile@2520(10.5x240) - mushkin 222- 9800pro- 3Dmark01 - 21166.
DFI P5BV3+ - K6-III+ 450@600(6x100)@2.4 vcore - Ati 8500 - 2x 4gb Quantan FireBall
*DFI NF3-250GB UT Beta Bioses w/ 4.0vdimm and works w/ mobiles*
*NF7 modded BIOS Vault*
*If you have a DFI NFII MoBo read this*
BH-5 Forever
Last edited by misteroadster; 08-19-2004 at 04:36 PM.
Originally posted by althes
dont think its possible dual channel
So,what ?Originally posted by jess1313
sorry not acually ddr700
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
A-data TCCD 512MB@DDR610 1:1
johnnyliu3377
CPU:Socket 939 FX-53@2.6G 1.5V(260x10)
M/B:MSI K8N NEO2 Platinum
MEM:A-data DDR600 TCCD 512MBx2(5-3-3-2.5 1T)
VGA:ATi X800XT Platinum Edition
3D01:30425(540/600) 3D03:15377(633/633)
Exatly ,i do same with my ADATA PC4000 at x4 multi 2.6v 3/4/4/10 :Originally posted by jess1313
sorry not acually ddr700
you have A64, and are using 4 multipier, and the lowest ram devisor for a64 is 5 so your are running at 350mhz@4:5=280mhz, still awsome though.....
test bandwidth at 280mhz w/ 5 multi @1:1, and at 350mhz w/ 4multi @1:1, and results should be very similar....
ADATA PC4000 @355Mhz Coef x4
French Overclockers roxxxxxx
OCM Team addict
Originally posted by overcrash86
Exatly ,i do same with my ADATA PC4000 at x4 multi 2.6v 3/4/4/10 :
ADATA PC4000 @355Mhz Coef x4
good god!! thats a crazy oc.. , ive tested alot of pc4000. the fastest i ever got was 310 from 1 256 stick. are these newer vitesta employing the new samsung tccd, or are they hynix.??
ADATA Vitesta DDR500Originally posted by flapperhead
good god!! thats a crazy oc.. , ive tested alot of pc4000. the fastest i ever got was 310 from 1 256 stick. are these newer vitesta employing the new samsung tccd, or are they hynix.??
Last edited by overcrash86; 08-20-2004 at 03:20 PM.
French Overclockers roxxxxxx
OCM Team addict
Posting Permissions
Reply With Quote
Bookmarks