Hi, coolaler!!!
The FSB wall of your Merom ES chip looks lower than mine
Keep trying
Hi, coolaler!!!
The FSB wall of your Merom ES chip looks lower than mine
Keep trying
WR RecordOriginally Posted by coolaler
Crazy Time.......
Congratulations
1GB x2 & MemSet should help you more!!!
I think whats more amazing then these pi times is that we're seeing 65% overclocks here and by the looks of it you can go farther. I feel like I'm the only who notices that he's got this chip at a 65% increase from its stock speed! lol, is it me or is that huge! Like amazing! Being able to buy this $250 chip and clock it 65% higher. That just seems outrageous! lol
Opteron 170 CCB1E 0550VPMW @ 2.65ghz 1.275 vcore (Big Typhoon) capable of 3ghz
OCZ Gold DDR400@2-2-2-5
74GB Raptor
DFI UT Ultra-D
Gigabyte 6600gt
week and stepping of the cpu PLEEEEEEEEEEEEEEEEEZ i can get myself a merom cpu so i need to know what to pick ))
thks,I am your fancyOriginally Posted by kyosen
i'm lucky my chip could 3.3g by air cooling,but I'm fool to turn RAM Timming
Its not just you. Really hard to get my head around it being all on air!Originally Posted by andyisc00l
Sourcing parts for a mildly over clocked abacus.
hoho...very nice chip.
3.5G must under coolaler's phasechange.
103c do not support merom ?
try cpuz1.33 but not 1.33.1, and you will get correct vcore readings.
hehe!is LN2Originally Posted by VictorWang
Shoulda stated that earlier, i thought it was air! lolOriginally Posted by coolaler
Still good nontheless
Intel Rig
2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
Custom Water of course
under 3.3Ghz is air coolingOriginally Posted by Absolute_0
and then reaching over 3.3 is LN2
Very good stuff man! What voltage were you using on LN2 to get those speeds? CPUZ errored out the Vcore.
Merom is Conroe based, so is it the same default Vcore as Conroe - 1.15v?
Intel Rig
2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
Custom Water of course
1.5V@LN2Originally Posted by Absolute_0
Awesome runs Coolaler
Can you take down the 3D '05 WR? It will be a breeze with that cpu power
Heh, it's difficult for me to think of 1.5v as high, but 65nm is a whole new animal.
I was curious, what kind of temps were you getting on air with different voltages? I have yet to see a lot of temp data and voltage scaling, it would be really great!
**Yeah work on 3dmark05, the CPU power would be a HUGE boost to 05.
@ Rog that 3.5 Ghz was LN2
Last edited by Absolute_0; 05-12-2006 at 11:25 PM.
Intel Rig
2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
Custom Water of course
return to air cooling
3.2ghz @Superpi32M
another 3.2G results
If I was an AMD fanboi I would be calling this hax right about now.
HAX
And 54k in 01 with a 7900GTX. Why do you tease us old man. Show us 57k with that x1900XTX NOW.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
64bit
quite incredible. Coolaler your work in demo-ing all this conroe/merom hardware has been fantastic...please keep up the amazing work.
I dunno if you have any games or not, but if you could 'obtain' and test out some stuff like FEAR on these, it would be awesome. Icing on the cake.
Conroe E6300 ES
2x1gb Ballistix PC8000
Asus P5W DH Deluxe (1705)
Manli Geforce 7950GT 512mb
Hiper Type-R 480w
Samsung SP250
"What did the quantam duck say?" "Quark Quark"
Bookmarks