GEIL ONE PC 3200/4800 Born to Kill

[Mr.President]

in Germany the TCCD is advible at "alternate"

[targ]

we are still trying to get a concrete date on these and the UTT modules,

apparently they are shipping to suppliers. check geil.com.tw for dealer info for ur area and check there.

targ

[Eldonko]

I checked most of the major Geil dealers in US and Canada, no one even has it skued yet that I could find

[HARDCORECLOCKER]

in Germany the TCCD is advible at "alternate"

And here U can get the BH version in Germany (in stock !!!):

http://www.hiq24.de/product_info.php...oducts_id=3098

[Aleman]

And here U can get the BH version in Germany (in stock !!!):

http://www.hiq24.de/product_info.php...oducts_id=3098

Hahahahaha 235.90€!

Not even 1.5GB of Redline XP4000 cost that.

[HARDCORECLOCKER]

Hahahahaha 235.90€!

Redline XP4000 costs that.

But REDLINEs do often die - and are not rated 1.5-2-2-5 but 2-2-2-6.

Also warranty only up to 3.5 volts - GEIL covers their sticks up to 3.8 volts.

So it could be a very nice RAM at all - we need someone to test it.......

[AMD-me]

For the last time cas 1.5 is a gimmick. On a64 there is no CAS less that 2

Voltage warrenty? Honestly theres no way for a manufacturer to determine 3.5v vs 3.8v so it doesnt matter.

Redline can be had for a mere $180 while these retail for 230 USD

[Aleman]

I agree totally. The price is a bit exaggerated, even it they´d OC 3~6MHz on average more then the other UTT based sticks.

[HARDCORECLOCKER]

For the last time cas 1.5 is a gimmick. On a64 there is no CAS less that 2

Voltage warrenty? Honestly theres no way for a manufacturer to determine 3.5v vs 3.8v so it doesnt matter.

Redline can be had for a mere $180 while these retail for 230 USD

Huh.... - are U sure brother:

[HARDCORECLOCKER]

I agree totally. The price is a bit exaggerated, even it they´d OC 3~6MHz on average more then the other UTT based sticks.

Think it is average priced - take a look at G.SKILL FF, they are ~360€ in Germany

[Eldonko]

LOL, $350 Canadian for a gig of UTT RAM. It better do DDR600 for that price!

You would have to be crazy to pay that, I can get 4000VX for $100 cheaper and I HIGHLY doubt it will be any better

[Eldonko]

Huh.... - are U sure brother:

Just because tweaker says cas1.5 doesn't mean it does anything. It's reserved, cas1.5 is BS. Take a read through
this and you will see (PAGE 102).

Think it is average priced - take a look at G.SKILL FF, they are ~360€ in Germany

You can't compare TCCD prices with UTT, its apples and oranges.

[fatfreepork]

For the last time cas 1.5 is a gimmick. On a64 there is no CAS less that 2

Voltage warrenty? Honestly theres no way for a manufacturer to determine 3.5v vs 3.8v so it doesnt matter.

Redline can be had for a mere $180 while these retail for 230 USD

hahah! i cant believe people are just realizing this.

[AMD-me]

hahah! i cant believe people are just realizing this.

I know right?

[alpha0ne]

This stuff (Geil one 600MHz) costs ~ $465AU and you in the US reckon its expensive

New product = more $

[XiN]

Nice rams, but they aren't better than most of G.Skill 4400LE modules (even if they are guaranteed at higher clocks)

Have you tested trcd 3 at 300 mhz with spi 32M?

[HARDCORECLOCKER]

Any news from the UTT BH version?

[ImportantAwareness89]

Yes they also do cl1.5-2-2-5 @ddr400.... Btw .. If they are going to cost around 270$us they are still cheaper as the OCZ PC5000...

Regards

Well VX can do 1.5-2-2-6 @ 250 mhz easily =)

[ImportantAwareness89]

how r u guys cooling the ram btw?

[targ]

Voltage warrenty? Honestly theres no way for a manufacturer to determine 3.5v vs 3.8v so it doesnt matter.

no there isnt any way to tell if u went over 3.6v, but warrenting to 3.8v is to show the quality of the chips, not all redline would take over 3.6v happily, this will.

no actual benifit, just extra confidence in the modules capabilities, thats all.

targ

[Primoz78]

Have bought the Geil ONE with BH-5 chips a few days ago...but sent them back to RMA...I wasn`t able to make them running stable even at 2-2-2-5 at 200FSB...have tried about 4 different kind of bioses and a lot of different settings...have tested at 200-225-230-240-245-250-260...with different latencyes and voltages from 2,6V till 3,6V withouth success. At the end it damaged my windows registry files and have to make a complete reinstall. So I was really disapointed with this BH-5 sticks and go back to Apacer PC4000 TCCD for now. But in few days will try the Geil ONE TCCD...hope with more succes thatn the BH-5 ones...

Regards,
Primoz

[TEDY]

primoz !!!! another fella from my country

[HARDCORECLOCKER]

Have bought the Geil ONE with BH-5 chips a few days ago...but sent them back to RMA...I wasn`t able to make them running stable even at 2-2-2-5 at 200FSB...have tried about 4 different kind of bioses and a lot of different settings...have tested at 200-225-230-240-245-250-260...with different latencyes and voltages from 2,6V till 3,6V withouth success. At the end it damaged my windows registry files and have to make a complete reinstall. So I was really disapointed with this BH-5 sticks and go back to Apacer PC4000 TCCD for now. But in few days will try the Geil ONE TCCD...hope with more succes thatn the BH-5 ones...

Regards,
Primoz

Maybe U picked up some bad sticks - myself just tested this here:





No way to get 270 but 260 with the hard tweaked timings known from old school BH-5:



My friends only for a short period - now U can find 'em on EBAY....

[Primoz78]

primoz !!!! another fella from my country

Heh Tedy meybe I know U from another forum
...Am I wrong?

HARDCORECLOCKER maybe...cause was really angry when have spent about 4 days trying to make them work stable even at 230mhz 2-2-2-5... Now I`m thinking of Geil ONE TCCD...but I`m not sure yet...baybe I will go for Mushkin Redline...

Regards,
Primoz

[Primoz78]

I have received an e-mail from the shop I have bought my ram...I have to wait for thesting and till 10. aug. I won`t get any answer cause there are all on hollydays...uff

Regards,
Primoz