Venice, Stepping and Oc Database

**TEDY** · 05-26-2005, 11:32 AM

geeze

04/14-3

300*9 not even 1.475/1.5/1.525v

am i doing something wrong here ?

**dave164** · 05-26-2005, 11:41 AM

Ive got "LBBLE0517GPHW", never heard of this GPHW before

**2||Para** · 05-26-2005, 11:50 AM

Hi people! first post

Somebody recommend me some new RAM to replace this please.

Wont go much higher even on a divider and lower multi. Budget is £150/$300

Thanks

**faruquehabib** · 05-26-2005, 03:14 PM

ok, this is in my shuttle SN95G5 Nforce 3 ultra chipset xpc...HTT maxes out at 280 in bios, and i needed a divider on my crappy ram, but....

Venice 3000+ retail from newegg

LBBLE 0515FPDW

motherboard is definitely holding this cpu back, no doubt. if i could raise HTT higher (maybe with clockgen i can) i bet it will go higher. rig is silent as well...

EDIT: here is the link to my validation screen:

http://valid.x86-secret.com/show_oc?id=19844

**BadlyDrawnBoy** · 05-26-2005, 04:07 PM

Clockgen will let you go above 280 with the SN95G5.

**faruquehabib** · 05-26-2005, 04:14 PM

Originally Posted by BadlyDrawnBoy

Clockgen will let you go above 280 with the SN95G5.

i hit 300 with clockgen with stock voltage and then 30 sec. later it reboot. i will try again later with more vcore.

**coop** · 05-26-2005, 04:18 PM

I got a new stepping, 3500 LBBLE 0517 APOW. Just set it up and ran a couple 1m pi. Running at 2.6@1.37v and 29C. I wish the temp would stay down there when it gets a little voltage. I have pic when I get on other comp. Also got a 3500 LBBLE 0515 FPAW. Have not tried yet.

**gocchin** · 05-26-2005, 04:29 PM

3200+ 0517BPDW
2700mhz 10x270 @ 1.36v air cooled XP-90 2-2-2-5

**alpha0ne** · 05-26-2005, 05:55 PM

these new Venice cores (IF I could get a good one) are really starting to tempt me away from my beloved 2.8c M0

**SET** · 05-26-2005, 07:08 PM

Apparently the 0517 make very good work. It is at least much improves that my 0516EPEW that does 2.8@1.75v.

Somebody knows of where are dispatching the new weeks but in U.S.?

Thanks

**TheMeatFrog** · 05-26-2005, 07:14 PM

I think I'll drop by Monarch tomorrow and see if they are still on the 0516s or if they have moved on to the 0517s

**TEDY** · 05-26-2005, 09:01 PM

is it heat my problem i can't get it to run 300*9 ?

i have zalman 7000b alcu

i can run it easily 280*9 at 1.375v

**alpha0ne** · 05-26-2005, 10:42 PM

Originally Posted by TEDY

is it heat my problem i can't get it to run 300*9 ?

i have zalman 7000b alcu

i can run it easily 280*9 at 1.375v

I am no expert regarding Venice but your cooler is certainly not classified as being "high end" such as the Thermalright XP90 or XP120

**TEDY** · 05-27-2005, 03:27 AM

i know :P but my old winnie did ran 300*9 at 1.55v just fine

**dave164** · 05-27-2005, 03:43 AM

So no one knows anything about my GPHW? I dont have a clue what this can do and i see everyone with differnt ones..

I might sell and get a better stepping one?

Ill wait to make my conclusion next wek when my PC4000 arrives...

**RafaDel** · 05-27-2005, 05:03 AM

Hey Sobo, nice work to put this list together. Now how about to sort this out by stepping AND week so we can see the progress of new batches...

**sobol** · 05-27-2005, 05:34 AM

Aint problem for me, i have such sortings in docs but i though that public 3 differ sorting will be big flood,especialy that the list is large now and might be eaven bigger.

**TEDY** · 05-27-2005, 05:36 AM

Flashed to 5/10-3.

So far 285*9 at only 1.35v (1.31v windows)...I know just set 300 and try....well i'm the kinda guy which progresses step by step......next 290...295...etc...hehe

**faruquehabib** · 05-27-2005, 05:53 AM

update on my LBBLE 0515FPDW

300HTT at 1.4 volts ran 3dmark and superpr and about to run prime95 with aquamark...

validation:

http://valid.x86-secret.com/show_oc?id=19909

**TEDY** · 05-27-2005, 06:12 AM

please post voltage as set in bios not in windows....all mobos undervolts...please put into consideration :=)

**Napoleonic** · 05-27-2005, 06:14 AM

so where is the right volt? BIOS or softwares?

**faruquehabib** · 05-27-2005, 06:35 AM

Originally Posted by TEDY

please post voltage as set in bios not in windows....all mobos undervolts...please put into consideration :=)

well, i left the voltage at stock in BIOS (3.5 vcore) and raised it using clockgen. my rig is stable so far at 280HTT with stock voltage. i raised it by .5 volts in clockgen, so i assume it is at 1.4 vcore, but i can raise it in bios instead later when i decide to reboot.

**TEDY** · 05-27-2005, 06:39 AM

that makes sense then

yupiiiiiiiiiiiiiiiii

290*9 works now at 1.375 bios...1.32 windows

damn 04/14-3 ...

viva 05/15-3

**Th3__W00T_GuY__** · 05-27-2005, 06:53 AM

ok guys, I'm getting the CBBLE 0512DPBW one^^ i'll post my results when i get my 2x512 OCZ el platinum rec.2 from RMA!

**Dani** · 05-27-2005, 07:11 AM

I bought two week17 3200+ Venice today:

- LBBLE 0517BPDW 0963
- LBBLE 0517BPEW 0057

I set BPEW under Zalman 7700cu and first boot to the CPU@251*10 1.4Vcore and straight to StressPrime2004

- 3200+@2510MHz, did 24min and then I went to job...
If everything is ok, SP2004 should be working on 5h30m now

Thread: Venice, Stepping and Oc Database

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions