5600+ X2 on chilled water

[alpha0ne]

Nice chip Flasker, hmmm $200AU for a 5600+ hmmmmmmmmmmmmmmmmmmmmmm should I or should'nt I

[macci]

Flasker,
Did you remove the heatspreader yet?

btw, I've got a pretty decent 6000+ in the other thread. Does 3557MHz aircooled for SPi1M with TT V1 cooler (+additional cool air). CPU idle temp is 24-26C according to Coretemp (cooler base/Heatspreader temp is around 21C idle) - under load (quick SPi1M run) it gets up to around 40C Coretemp / 28C cooler base/heatspreader. 1.5V.

I didnt see any gain going from 1.5V up to 1.6 or 1.65V - might require better cooling to see the voltage scaling though.

[Flasker]

I`m glad to see someone trying chilled water on these- I was gonna try it myself and aim at 4GHz but id rather have a Spi and 3DM machine.

The higher multi of a 6000+ should allow ya to push the temps into coldbug range, with an x15 you`d only need 266 on the base HT speed.

Do you know where your chip coldbugs yet?

This was my first run with my new chiller, and my first time on a chiller, so I was conservative and held the temp @ 10C. The next run I'll find out where it coldbugs.

[Flasker]

Flasker,
Did you remove the heatspreader yet?

btw, I've got a pretty decent 6000+ in the other thread. Does 3557MHz aircooled for SPi1M with TT V1 cooler (+additional cool air). CPU idle temp is 24-26C according to Coretemp (cooler base/Heatspreader temp is around 21C idle) - under load (quick SPi1M run) it gets up to around 40C Coretemp / 28C cooler base/heatspreader. 1.5V.

I didnt see any gain going from 1.5V up to 1.6 or 1.65V - might require better cooling to see the voltage scaling though.

No the heatspreader is still on, no time right now.

Looks like you have a good 6000+

My 5600+ goes to 3.4 on 1.55V, take a lot more V to get it higher.

What ATI board you on?

[LIKMARK]

Damn! Thats some nice clocks.

If you're gonna remove the heatspreader you should know that some of the new A64 got the IHS glued on like the Intel cpu's
(you probably know about this, but anyways...)

[SOLDNER-MOFO64]

It's summertime the weather is hot, can't get a respectable overclock, so what's an overclocker to do? Well build a chiller of coarse!
Early results of my latest project.

I'm wondering why your OCZ PC2-6400 has SPD timings programmed for 533mhz (DDR1066mhz)?

[LIKMARK]

Take a look at the part number in cpuz, cpuz reads "everything" as pc 6400

[Plywood99]

Whoa! Nice clocks bud. Man I really want to try a f3 core...


Ply

[CCUABIDExORxDIE]

for 80 bucks you can get an f3 3800+ from newegg. just look for CZ in the part code.

[Nordling]

foto system plz...

[SOLDNER-MOFO64]

Take a look at the part number in cpuz, cpuz reads "everything" as pc 6400

Ahhh never noticed that.....crazy..lol

Very nice results dude

[Flasker]

3800 MHz barrier is broken,
had it higher, but the darn thing would freeze every time I tried to save the validation file.
Coldbugs @ 8C

http://valid.x86-secret.com/show_oc.php?id=210833

[mAJORD]

what voltage? So close to 4 now.. above 0. that will be a milestone in coldbugged AMD times.

[N00B]

3800 MHz barrier is broken,
had it higher, but the darn thing would freeze every time I tried to save the validation file.
Coldbugs @ 8C

http://valid.x86-secret.com/show_oc.php?id=210833

OWO great chip you have there!!
Please try to get some photosss

[Lightman]

Who would thought a year ago that 3.8GHz will be possible on 90nm AMD X2 with above 0C temperatures? (No one! )

This is showing how good AMD/IBM DSL SOI can (compared to Intel bulk) be if tweaked properly! What a pita it takes so long to get where it is now...

[Flasker]

I haven't had much time for benching lately, summertime and all, but I had some time last night so I fired up the chiller. Twisted my 5600+ as hard as I could.

I thought this thing coldbugged at 8C, but it was a BIOS issue that behaved like a coldbug. Anyway got the CPU to -5C @ idle, 2C @ load, best I can do with high v-core required to get the clocks. Measuring the temp of the top of the block I had -15C. This thing is like a toaster!

Won't be able to catch flytek, not with this chip, got a CPU-Z of 3892 MHz, but the file was corrupt, I'll try again.

Here's a SuperPi 32M run @ 3782 MHz

[Lightman]

Isn't this new SuperPi WR on AMD X2??
Congratz!!

[Jimmer411]

Holy ! I never imagined these kinds of speeds on a A64! I thought I was doing good with a 2.9ghz chip! (ram limited) this is just incredible!

How does a 3.6 A64 do against a 3.6 C2D in other benches, lie cinebench and encoding and higher resolution gaming?

[biohead]

we need some F3 FX action!! darn coldbug