new BIOS m606c_12.b02 for abit AW9D MAX

[coolaler]

new BIOS m606c_12.b02 for abit AW9D MAX







This beta BIOS is not released offically, and you will have to take a responsibility if you want to use it

download m606c_12.b02

platform



room temp: 28 degree
dual spi32m@3.9g

[Raja@ASUS]

very nice Coolaler...

What voltage settings on cpu, mch etc?

[coolaler]

very nice Coolaler...

What voltage settings on cpu, mch etc?

all limit,but i think it's could be lower

[Raja@ASUS]

edit: ah yes I just had a proper look at your bios screen shot for the voltages, sorry missed that..


I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...

What ram timings did you manage at 445fsb 1:1???

regards
Raja

[coolaler]

I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...

What ram timings did you manage at 445fsb 1:1???

regards
Raja

4-4-3-4
it's runnig again,i will show when it's finish

[coolaler]

hehe
it's 4-4-4-5 but show 4-4-4-27 (maybe i am wrong option,i will try again)

[Hazzan]

NIce Coolaler !! I will try

[NicoOCZ]

Good job coolaler
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?

[coolaler]

Good job coolaler
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?

some cpu maybe no working at ratio option,try it,maybe u can

[NicoOCZ]

some cpu maybe no working at ratio option,try it,maybe u can

Chaps over at hardwareluxx.de tested it with 6400 and 6600 retail, no problemo

[coolaler]

air condition is off,i am wet
TM working,when temp higher

[NicoOCZ]

28°C? Poor you

Keep it coming mate!

[coolaler]

core1 temp 82c
core2 temp 82c,when full speed

[Raja@ASUS]

Coolaler one last request bro' if you have time, can you show us Everest memory bandwidth please???

http://www.angrygames.com//files/everesthome220.exe

Let's see what it scores on that 1066 strap at 445fsb..

regards
Raja

[situman]

Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.

[JohnMike]

Well, i think that those results with Spi 32MB a little bit dissapoint. I have here same/better results with my P5W DH with less FSB and less core speed.



I'm missing something here?!

[coolaler]

Coolaler one last request bro' if you have time, can you show us Everest memory bandwidth please???

http://www.angrygames.com//files/everesthome220.exe

Let's see what it scores on that 1066 strap at 445fsb..

regards
Raja

my 4:5 limited

[Raja@ASUS]

thanks Coolaler, great bandwidth on the ram..

[Lestat]

max nb and fsb voltages and all you did was 433 x 9

please tell me that that not all you got ?

throw some water on it.
that high on air is silly. WAY too hot dont you agree ? 82c ? ouch

[The Nemesis]

Cooler, can you run the "Cache & Memory Benchmark" located under tools. I get 10320 read when I run it the way you did, but using the one under the tools section I get 9146 read. My 9 X 400 scores beat all my 8 x 445's.

[NicoOCZ]

Still no 1:1, even with this beta. Hope Tony gets his hands on this board

[JohnMike]

Again...

Well, i think that those results with Spi 32MB a little bit dissapoint. I have here same/better results with my P5W DH with less FSB and less core speed.



I'm missing something here?!

Any comments?!

[The Nemesis]

Again...



Any comments?!

I have this board coming Monday or so. I don't want to be discouraging & want to continue to see others hard work, but I tend to agree with you. I don't think this board will be replacing my P5W DH.

[erwinz]

hey coolaler.. what happen to your video card? burned it again? hehehe your very xtreme.. ..its good Abit is supporting thier board..

[party animal]

Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.

No, those arent OCZ sticks being used (they might be under those heatspreaders though). Coolaler has those custom heatspreaders with his own logo on them.