Asrock Z77 Extreme4 & Extreme6. Report issues, overclocks, and related stuff here!

[Swiftdeathz]

I recently upgraded my motherboard and CPU from my phenom II X4 945 to an IvyBridge based system. Now either my system hard locks and loses display, or shuts down, or just spits out the following blue screen:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8007443240
BCP2: FFFFF88004D44768
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\043012-6193-01.dmp
C:\Users\...\AppData\Local\Temp\WER-9219-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I even re-installed windows for the new system, I also have tried 12.3 drivers and 12.4 drivers. If I disable CFX then I can run anything 3d related, otherwise the above problems.

i5 3570k (at stock)
AsRock Z77 Extreme 4 (using latest drivers/bios)

Anybody have any ideas?

Also, the system appears to be stable as I left it overnight folding and as previously said, I can bench without a problem with CFX disabled. Currently using latest official 12.4 drivers.

[Ket]

If your problem is only when CF is enabled I would lean toward there being a problem with the latest Catalyst drivers or a issue with the VGA BIOS. If the problem appears to be the latter the only solution would be to contact Sapphire about it to see if they can issue you a new vBIOS to flash to the cards.

[Darknight]

my 3770k in fatality ...

I have to test better, but let linx for 8 times and all right

[Swiftdeathz]

If your problem is only when CF is enabled I would lean toward there being a problem with the latest Catalyst drivers or a issue with the VGA BIOS. If the problem appears to be the latter the only solution would be to contact Sapphire about it to see if they can issue you a new vBIOS to flash to the cards.

Well this exact setup worked with my previous system parts, the only thing which was swapped out was the motherboard and CPU (asrock z77 extreme 4 and i5 3570k). So would this be a compatibility issue with the sapphire cards bios conflicting with this board?

Edit:

I know the cards are good since they were working fine in CFX on my AMD rig. Could also be a faulty secondary PCI-E port too I guess.

I tried changing the PCI-E from Auto to Gen 1 (i think it was Gen 1, or Gen something) didn't do anything.

Edit: I verified everything was properly seated and checked all the power connectors, also tried a second CF bridge. Sometimes even GPU-Z will hang the system and BSOD it.

Not sure what is going on, possible conflict with this motherboard/chipset and cfx with these 7870 cfx cards or maybe some setting in the BIOS that I need to change.

[Ket]

Have you tried disabling spread spectrum?

[Swiftdeathz]

Have you tried disabling spread spectrum?

Yes, that is disabled. I even have all the iGPU settings disabled.

[Ket]

If you are using the latest UEFI and have tried setting the PCIE slots to Gen2, I'll have to pass it on to my contacts for them to look at as I only have 2x HD4830s.

[Swiftdeathz]

If you are using the latest UEFI and have tried setting the PCIE slots to Gen2, I'll have to pass it on to my contacts for them to look at as I only have 2x HD4830s.

I have the latest 1.30 bios from here:

http://www.asrock.com/mb/download.us...xtreme4&o=BIOS

Not sure what you mean by the latest UEFI. I've changed the PCI-E setting in the BIOS from AUTO to Gen 0 (I don't believe I have Gen 1, it only has 2 options: Auto and Gen #)

I also tried installing each of them on their own in both slots and they both run fine. Me thinks it's some sort of issue with this brand spanking new Z77 chipset based motherboard.

I'm dumbounded.

[Ket]

UEFI is the BIOS effectively, the difference: Mainboards now use whats known as a Unified Extensible Firmware Interface instead of the legacy Basic Input Output System

[Swiftdeathz]

I'm using the fancy new GUI version if that's what you mean. I even went as far as changing my DIMM slots from 1 3 to 2 4 but no dice. If you could forward it and see if maybe a new BIOS can be released or something would be much appreciated.

For now I will use 1 card, if this isn't resolved I guess I'll end up selling one of my 7870 OC cards.

[Herby]

I just ordered the xtreme4 and a 3570k hoping to overclock to around 4.5 Ghz with a H100. Do you think the heatsinks on the board are going to hold me back/cause problems?

[Swiftdeathz]

I just ordered the xtreme4 and a 3570k hoping to overclock to around 4.5 Ghz with a H100. Do you think the heatsinks on the board are going to hold me back/cause problems?

I'm already at 4.4ghz with a TRUE Black and a single 120mm fan, so I don't see that being a problem. What may hold you back would be a terrible overclocking chip, but the average I'd imagine would be easy 4.4ghz on air and that wouldn't have much to do with the heatsinks on the board.

I simply added +0.005v and am at 1.208v at load and so far seeing temps of 66C max while folding for over 12 hours with around 20C ambient temps.

What I need now is to find out what is causing my previously working CFX setup with my 7870's to not work now with this board. (they were working perfectly fine with my AMD system which had the exact same components except for the motherboard and cpu.)

[Swiftdeathz]

There has been a revelation, it appears to be something software based with DirectX being the main issue, I'll copy and paste my findings from another forum:

Thanks for the suggestions and assistance. I tried what you suggested and instant BSOD when trying to run 3dmark 11, also gpu-z just hangs and crashes with a popup.

Now as you hinted, it appears to be something DirectX as I just ran the MSI Kombuster app that comes with the latest MSI Afterburner and it renders in OpenGL and it completed without a problem. Also the game Rage worked for me, and it uses OpenGL. MSI Kombuster even spit out this score for me:

SCORE: 27126 points, Avg FPS: 452 (60000 ms)

Now what else can I test. I can upload the new crash dump or do you want me to try a few more apps. I have 3dmark vantage installed as well as Unigine Heaven 3.0

Edit: confirmed, just did a full run of Heaven 3.0 but in OpenGL mode and it completed (albeit choppy and slow since it doesn't have an optimized AP for the OpenGL version of Heaven) and both cards were being stressed properly.

Edit: Ok, more info. I was able to complete runs in Heaven 3.0 in OpenGL mode, DX9 mode and DX10 mode. DX11 BSOD's. Also tried 3dmark Vantage which is DX10 I believe and it also BSOD. Here are the 3 BSOD's from 3dmark 11, Heaven 3.0 DX11, and 3dmark Vantage.


So it's some problem with maybe cfx optimizations or something with dx11 or I don't know.

[dejo]

on my z77 xtreme6 with 2600k I only have mem multi to 2133, anyone else have the same. didnt check on old bios to see if it was there on them

[tripleflip18]

Hi, i got Z77 Pro4, and my multiplier drops to 34, i've spent about 6 hours today with no luck, just keeps droping. do you guys know of a fix. i got the 4.5 at 1.22vcore but the multiplier keeps dropping

[beast200]

Hi

it was the motherboard which had failed and gave error 10
so heres the question do i keep the 2500k (4.8 stable) or use the 3570K which i have just purchased
will have to sell 1 of them

cheers

[Flarexi]

Getting new Z77 Extreme 6 tomorrow from RMA the first one failed after a week with error code 10, I'll post my results as soon as I get my comp back together

[Herby]

Getting new Z77 Extreme 6 tomorrow from RMA the first one failed after a week with error code 10, I'll post my results as soon as I get my comp back together

I hope this is not a common issue, will i regret moving from ASUS?

[shmaa]

on my z77 xtreme6 with 2600k I only have mem multi to 2133, anyone else have the same. didnt check on old bios to see if it was there on them

My xtreme4 only had a divider to 2133 when I had a 2500k installed. After swapping it out for a 3570k, memory divider is now going up to 2800. This was on UEFI 1.3

[dejo]

My xtreme4 only had a divider to 2133 when I had a 2500k installed. After swapping it out for a 3570k, memory divider is now going up to 2800. This was on UEFI 1.3

thanks, thats what I was wanting to know. I did back the bios and had same 2133 limit, so thought maybe it was just for the ivy chips getting higher dividers.

[Ditka]

I ordered my Extreme6 board.

I am also ordering an IB 3770 chip and SSD drive.
I have a bunch of Amazon credit so im going to spring for a Corsair H100 as well since I have always done Air cooling towers before and figured I would try one of these.

Video Card is another conversation as I dont know what the best bang for the buck is. I wanted to wait for a 660 or 670 but looks like that might be delayed until Q3.

One thing I just cant make my mind up on is memory.

GSkill Sniper 1.25v - http://www.newegg.com/Product/Produc...82E16820231461
Is the lower voltage one better than the 1.35v?

Corsair Vengeance - http://www.newegg.com/Product/Produc...82E16820233252
Was going to split this with a buddy who is also buying the same MB/Proc.


My usecase is going to an average gamer, and I want do do some overclocking probably to 4.5 range. Just want to be stable and not push it to max.

Thoughts?

[AntiKarma]

I ordered my Extreme6 board.

I am also ordering an IB 3770 chip and SSD drive.
I have a bunch of Amazon credit so im going to spring for a Corsair H100 as well since I have always done Air cooling towers before and figured I would try one of these.

Video Card is another conversation as I dont know what the best bang for the buck is. I wanted to wait for a 660 or 670 but looks like that might be delayed until Q3.

One thing I just cant make my mind up on is memory.

GSkill Sniper 1.25v - http://www.newegg.com/Product/Produc...82E16820231461
Is the lower voltage one better than the 1.35v?

Corsair Vengeance - http://www.newegg.com/Product/Produc...82E16820233252
Was going to split this with a buddy who is also buying the same MB/Proc.


My usecase is going to an average gamer, and I want do do some overclocking probably to 4.5 range. Just want to be stable and not push it to max.

Thoughts?

I'd personally go with 1.5V ram, just for compatibility/stability reasons. Also, I wouldn't worry to much about the speed, there is very little gain with SB with the increased memory speed. IVB may prove different (I haven't seen too many reviews, so I'm not sure), but I dare say running at 2133 compared to 1600 or even 1333 on SB or IVB will net you less than 2% performance increase in benchmarks, even less with real world stuff. I actually only ever upgraded to 2133 in my SB system because I was folding, and it gave a bit of a PPD increase.

[Swiftdeathz]

Update to my issue, I got an email support response from Asrock which was nice and they suggested a reinstall of Windows on a different drive to test. Well I went ahead and just reinstalled on my SSD from a fresh format and so far so good. Perhaps it was a software glitch after all with my previous install. The weird thing is that even after the reinstall of Windows, I still had GPU-Z lock up my computer and I had to reboot, not sure why GPU-Z causes problems from time to time now. I haven't gotten any BSOD's though from gaming or 3d benching.

[DilTech]

The Extreme4 is a good board, if you can find one for a good price its well worth picking up.

Would $89 be considered a good price for a new one? I'm making the jump (finally) to SB (IB just seems like too much work to tame the temps) in a couple days and I'm trying to decide on the perfect board for me since I just don't upgrade too often these days.

[Herby]

I simply added +0.005v and am at 1.208v at load and so far seeing temps of 66C max while folding for over 12 hours with around 20C ambient temps.

Did you mean +0.05v??

I am currently at 4.4ghz on a 3570k with offset at 0.04v giving me just under 1.2v on a H100 but reaching 72C under IBT. I have the fan setting on low but this temp seems very high. Tried reseating the heatsink but no joy.

4.4ghz is fine but i wish my temps were a bit better, would be nice to push it further if i need it in the future.