**Official** GIGABYTE Z87X-OC/OC Force Club

[Leeghoofd]

Cool so we didn't get the VRMs you expected it to be or the misinformation you got from that Gigabyte Specialist at Newegg blew things out of proportions. I've worked with this board from day one for Haswell pretesting and it was stable & performing. The Z87X OC performed admirably well, efficient for daily usage and even no hickups under extreme cold

Now I would only judge component choice, not on paper but how it all functions in reality... Haven't we al seen impressive phase specs in the past, yet they added nothing to the boards instead of E-peen and bragging rights...

You made your point you are unhappy with the component choice of the engineers. Is it possible to get back on track and see results on this board plz... this could be a long, endless and pretty pointless discussion in my book... adding no real value to the thread as most of us were aware of the component choice, tested it and loved it

[Nizzen]

sin0822 :

Any news about official Gigabyte x79 ivy-e bioses?

[stasio]

sin0822 :

Any news about official Gigabyte x79 ivy-e bioses?

Go to GB web page,you have new BIOS for X79-UP4 and UD3.

[ChaosAD]

Just got this board yesterday. Great looking board, will see how it performs today along with my 4770k. Is X04 the best performing, issue free bios to use?

Sent from my GT-I9300 using Tapatalk 4

[andressergio]

Just got this board yesterday. Great looking board, will see how it performs today along with my 4770k. Is X04 the best performing, issue free bios to use?

Sent from my GT-I9300 using Tapatalk 4

Yes my friend i felt it that way

[VRSpy]

great man !!! keep pushing and try BIOS X4

will try that later...meanwhile just wacked 5Ghz run with 4x4GB Team xtreme ram at 3K
Tested my 2nd delidded chip! idle temp at 5Ghz!!!
non Air-con rm, ambient 29.6deg.

[SonDa5]

wacked 5Ghz run with 4x4GB Team xtreme ram at 3K
Tested my 2nd delidded chip! idle temp at 5Ghz!!!
non Air-con rm, ambient 29.6deg

Nice.


Is that the Force?

[l0ud_sil3nc3]

Stopped by the Gigabyte booth at IDF and snapped some pics:







something new in the mix



and it's back!



Nice to finally meet you Irene and Colin

[andressergio]

i cant get to pass 3100CL13 with my GIGA Z87X-OC using BIOS X4 on 3 of my best MFR kits...

what im doing wrong ? i just move to 1.25 strap CPU is low with auto volts and mem i have to give a lot of volts, also tried System Agent and nothing...

[andressergio]

GOD and with BIOS F7a is worse tried MEM OC profiles i get 500 times err 15 shuts off etc is this mobo ment to CFR ? cauz im using MFR

[Shiranui Gen-An]

Heh you sound like me and CFR on the Asrock board. I'd say forget the profiles and just set your primary timings on the OC boards, the profiles don't really work well in my experience.

[andressergio]

Heh you sound like me and CFR on the Asrock board. I'd say forget the profiles and just set your primary timings on the OC boards, the profiles don't really work well in my experience.

samsung goes well
MFR none of my best 3 kits above 3100 no boot just reboot off ERR 15

will try CFR to see

[dinos22]

now sonda5 has a slightly new pitch over at OCN as well. Seriously dude, who are you kidding man

http://www.overclock.net/t/1415588/t...-mother-boards

[sin0822]

Heh you sound like me and CFR on the Asrock board. I'd say forget the profiles and just set your primary timings on the OC boards, the profiles don't really work well in my experience.

\
This^^ don't set profiles, just set the divider and your main timings, you can then tweak up your timings from what the board sets. Or just use the timings from when it went higher.

[stasio]

i cant get to pass 3100CL13 with my GIGA Z87X-OC using BIOS X4 on 3 of my best MFR kits...

what im doing wrong ? i just move to 1.25 strap CPU is low with auto volts and mem i have to give a lot of volts, also tried System Agent and nothing...

3200 very easy.....

[SonDa5]

now sonda5 has a slightly new pitch over at OCN as well. Seriously dude, who are you kidding man

http://www.overclock.net/t/1415588/t...-mother-boards

It's not a new pitch. Same message I have shared at a number of online computer enthusiast hangouts that I have hanged out over the years.

Blame Gigabyte marketing for my valid complaint. IMO you should not worry about it. Just do your thing as an over clocker and have fun with your hardware. People that have valid complaints should be taken into consideration for improvement of the situation.

[andressergio]

guys whats the most effective on this mobo for PSC i have 2200CL7@ 2600CL8 1T air 1.95 but soon as i go to 5GHz freezes on XP32

i tried System agent, more vdimm i cant use more than 1.95 mobo wont start dont tell me why i put all states of power on xtreme

using X4 bios

Thanks to All
Sergio

[andressergio]

im testing 2x8GB that i never tested

this ones Kingston Beast 2x8GB 2400CL11-13-13 1,65V






2500 stock timmings and volts






2600 stock timmings 1.75V






Cheers to all !!!
Sergio

[stasio]

X05 is out.

[nfszocker]

5.05GHz/1315MHz 8-12-8-28-1T @ Air/4,75GHz UC

6.05.547s

[Blackwhite]

Hi guys .
I am having problem with my board.
All I am getting is Error on LCD poster A6.
I have checked with different RAM, PSU, Reset BIOS, removed CMOS battery - nothing.
Is my board Dead?

[andressergio]

5.05GHz/1315MHz 8-12-8-28-1T @ Air/4,75GHz UC

6.05.547s

Very nice bud !!!

[sin0822]

i did some quick runs with a new ADTA 2800C12 kit i got my hands on:

single stick 3580mhz on air:
http://valid.canardpc.com/vestbn

4 sticks 3334mhz on air
http://valid.canardpc.com/dqwemh

I had to use BIOS B03 for this and just set CL13 and T2 and then put 1.85v in. More results will be posted soon.

[andressergio]

i did some quick runs with a new ADTA 2800C12 kit i got my hands on:

single stick 3580mhz on air:
http://valid.canardpc.com/vestbn

4 sticks 3334mhz on air
http://valid.canardpc.com/dqwemh

I had to use BIOS B03 for this and just set CL13 and T2 and then put 1.85v in. More results will be posted soon.

GREAT bud !!!

[nfszocker]

If of a GA-Z87X-OC Wallpaper liked to have, here I have made what 1920x1080: