G.Skill F3-12800 CL7D ECO [Low Voltage]

[LinkinParkBoy]

Anyone tried these memories already?





Homepage: G.Skill
Freq: 1600Mhz
Timmings: 7-8-7-24
Voltage: 1.35v


Great memories hum? From 1.35v stock untill 1.65v they have much to scale on OC

[aslanwas]

seems that Elpida has developed new Chips ( or an other brand, micron ? ), which need 0.3V less than Elpida BBSE etc..., waiting for some results there

[hiwa]

look like very nice memories huh?

i think they will be one the best chooses for daily use users

[WaterFlex]

Not expensive also, nice kit

[stasio]

Not expensive also, nice kit

Yeah,price it's Ripjaws range.
Some testing found on Germany site:
DDR3 1760; 7-8-7-24,VDimm 1.44V
http://img2.abload.de/img/860dpvf.jpg

DDR3 1800; 7-8-7-24,VDimm 1.54V
http://img1.abload.de/img/901j5gz.jpg

[Andrea deluxe]

6gb kit?

[WaterFlex]

2x2gb kit

[LinkinParkBoy]

Yeah,price it's Ripjaws range.
Some testing found on Germany site:
DDR3 1760; 7-8-7-24,VDimm 1.44V
http://img2.abload.de/img/860dpvf.jpg

DDR3 1800; 7-8-7-24,VDimm 1.54V
http://img1.abload.de/img/901j5gz.jpg

Nice

They should hit 2000 CL7 with 1.65 ~ 1.70v don't you think?

[Kentaro]

Can not wait to see some more testing result. Actually I didnt notice this ram could be good for OC before.

[SubZero.it]

Images of the memory?A 1600 CL6 should be perfect at 1.4v if possible

[hiwa]

Wow
ordered right now memoryc for just 115eu

[Oliverda]

Nice! Maybe I'll give it a try on my AM3 platform.

[LinkinParkBoy]

Wow
ordered right now memoryc for just 115eu

Lucky

Post some oc screens

[Enoc]

seems that Elpida has developed new Chips ( or an other brand, micron ? ), which need 0.3V less than Elpida BBSE etc..., waiting for some results there

looks more like Samsungs 40nm ICs that they announced a month ago...
they were rated at 1.35v

I wonder if this mem would do cas 5 1400mhz on AMD AM3 platform...

[Ramguy]

It can be the new Hynix H5TC2G43AFR, it operates at 1,35V. also.

[hiwa]

It can be the new Hynix H5TC2G43AFR, it operates at 1,35V. also.

1600 cl7?

[LinkinParkBoy]

i will get mine tomorrow, i'll post a few prints later on

[Oliverda]

i will get mine tomorrow, i'll post a few prints later on

Good news! Can you take a look under the heatsink?

[TheBlueChanell]

i will get mine tomorrow, i'll post a few prints later on

Awesome. Any chance you can see if these will do 1333 cas5, 1600 cas6 or 1800 cas6/7 @ or near 1.65v?

[proxis]

as far as i know, elpida hyper have 1.35 jedec spec and undervolted superbinned bbse should have no probs with 800 7-8-7 too

[TheBlueChanell]

I bit the bullet and ordered this kit. I will share my results when they arrive next week!

[Oliverda]

I bit the bullet and ordered this kit. I will share my results when they arrive next week!

[Smartidiot89]

Unbelieveable

So how would "high voltage" affect these long-term? I suspect these are Elpidas new 40nm IC's and perhaps they aren't that tolerant to higher voltage for a 24/7 setup?

[LinkinParkBoy]

Well guys, i guess i will only have some results for you next monday, if i have the time for it. I got the MSI DG80 here with the latest BIOS, but it's freezing on me all over the place even with more vdimm .

I will test them with an ASUS P7P55D. I don't think these modules like the MSI or vice-versa.

[noxon]

Well guys, i guess i will only have some results for you next monday, if i have the time for it. I got the MSI DG80 here with the latest BIOS, but it's freezing on me all over the place even with more vdimm .

I will test them with an ASUS P7P55D. I don't think these modules like the MSI or vice-versa.

I have just ordered the kit, 98€ incl shipping, and i have MSI P55-GD65, hope they run without problems! I already have enough problems with my Patriot and Kingston kits on that board...