As a newbie of SuperPi 32M, here's my first trial @ 4GHz with my original Samsung DH0-CH9 ram.
Tommi_Vercetti- 7:31:156 - 40x100 - 1333.00MHz - 9-12-12-15-108-1 - ASROCK Z87M-OCF - Samsung Original DH0-CH9 4GB x2/SAMSUNG HCH9 - 2.15v - CPU H2O/RAM AIR
Cheers!
Tommi_Vercetti
damn might have some potential here
no wazza, and not nearly tightened out all the way. was just going to play valids and get out of my comfort zone a bit and had some fun. Realized that the spreaders had popped off the outside on both sides. now that they are naked I will throw some better sinks on and try again maybe 5m57 hynixxxxx
Got a new chip for my UD5H to build up a new workstation but it looked good so swapped it out to the OCF!!
Early days but it runs like a champ
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
Awesome chip C-N
5G/5G uncore with ambient temp.
Thanks mate, I was just very lucky. Silicone never fails to amaze me!!
She's a keeper
Small update / pre work run!!!
C-N- 5:57:500 - 49x102 - 1430MHz 9-12-12-16-108-1 - Asrock Z87 OCF/AC - Corsair 2666 C10 2x4GB/Samsung HCH9 - 2.0265v - CPU Water Kuhler 920 / Ram Air
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
RULE- 5:57.922 - 48x104.2 - 1354.1 MHz - 7-11-7-24-74-1 - AsRock Z87 OCF-M - GSkill Pi 2200mhz C7 /PSC - 2.25V - LN2 CPU/Mem
First time memory under LN2, some instability below -90?C, close 5.57.500 but the screen is incorrect.
Try again this week-end.
RULE - 5:57:422 - 48x104.2 - 1355.8 MHz - 7-11-7-24-72-1T - Z87M OCF - G.SKILL PI 2x2GB/PSC - 2.269v - LN2@ALL
Very hard to get this with 66% humidity
http://img46.imageshack.us/img46/213...pgaftbeibu.mp4
Enjoy!
usually yes, not this time.
With very wet air there is a lot of condenses, so I tried to cover everything with a lot of blue paper.
Next time a water proof board will be better!
you know it's all because of you, i learned from the best!
Thanks Fabio and come back to bench please!
same cpu from the prior session starting the night off well:
finally caught myself
getting closer. . .
l0ud_sil3nc3 - 5:55:672 - 49x102.1 - 1361 MHz - 6-10-6-24-64-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.15V - LN2 @ all
and FAIL
sooooo close yet so far will keep going till I run out of juice since I will be out of town for most of the week which means no bench time
This is Offical Luna Theme from Microsoft Called "Zune", I ported from WinFLP OS , No TrueType Font used , only 1M memory used.
http://en.wikipedia.org/wiki/Windows_XP_themes
iRam has very fast transfer rate in 4K , extreme fast access time, doesn't slow down over time , and Unlimited write cycles compared to SSD if you always do Copy Wazza file.
Last edited by John Lam; 09-04-2013 at 08:29 PM.
Crusty - 7:17:891 - 40x100.6 - 1334MHz 7-9-6-20-62-1 - Asrock Z87 OCF - Skillz 2133C8 2x2GB/BBSE - 1.91v - CPU SS / Ram LN2
New os new manual bat-style wazza
previus run with slightly slacker timings,the big difference is because of ocx tweaker,no affinity-priority... almost 1 sec slower...
and some pics of the session
the reason i did not test 5g at all...next time...
and some psc sticks to test... hopefully something good will come out
Bookmarks