Ivy Bridge i5 3570K/i7 3770K batch and o/c results

[Martin.v.r]

I7 3770K Batch L211B472
5GHZ 3D vantage watercooling



http://hwbot.org/submission/2322663_

[Dumo]

3224B047 *A2913

2770 max imc, 1.46V 5Ghz...back to its box, next...


3224B259 *A1628

5Ghz 4C/8T 1.46V air, IMC absolute max 2970 and benchable @ 2600 tight timings...

With Hynix CFR



PSC

[Zeus]

Dumo, am i right in assuming tightning down the timings lowers the max clocks for the IMC? I haven't had the opportunity to try this myself but i think that is what you are saying, right?

[Dumo]

Zeus, imo it depends on the cpu. Some can do imc 3000 32m with relax timings but went beserk @ 2600 tight timings like this one...

3226B953

[Alex-Ro]

Hey dumo do you consider this very tight?Interesting enough,testing single channle 8-10-10 2400 is fine,but dual gives error.Same at 9-11-11 2600,single is fine,dual gives error.Lots of volts in VCCSA helps,e.g 1.3 is more stable than 1.2 but still gives error like round 20.If running near to 2800 it will not give error,it just freezes...

[jammin]

3570k under air cooling 5000mhz prime

[owikh84]

3570k under air cooling 5000mhz prime

Nice attempt... Pls try v27.7 with AVX instruction
ftp://mersenne.org/gimps/p95v277.win64.zip

[jammin]

yes have 27.7 on my pc!
with have a german forum bechmark list based on the 26.6 prime
have benched it with 27.7

have only scythe mine coller on it with 2 fans!

think 5 ghz on air is the maxiumum you can prime!

beste air cooler what i read is the Phanteks PH-TC14

here with 4900 an 27.7

[computerpro3]

I never have any luck..even when I get the good batches

Using XSPC watercooling, Maximus V extreme

3224B167 - 4.8ghz, 1.475v. Can't get 5ghz stable. Gives typical BSOD that means more vcore.
3224B220 - needs 1.525v just to get into windows at 5ghz, but gives strange memory management error BSOD before that. Could this just have the worst IMC ever?

[Dumo]

3226B939 1.27V 4c/8t on H20

[hersounds]

3226B939 1.27V 4c/8t on H20

Nice batch DUMO perfect Vcore and strong IMC

[SonDa5]

Nice batch DUMO perfect Vcore and strong IMC

Is this batch number the best around? I'm thinking about upgrading from 3570k. 3770k looks way better for over clocking.

[hersounds]

Is this batch number the best around? I'm thinking about upgrading from 3570k. 3770k looks way better for over clocking.

I have same batch 3226B987 look my pics on this thread , is very lower Vcore clocker...but unfortunately is Hot days on Buenos aires today 35C! tomorrow 34C i can't push it more with this hot days

[computerpro3]

Awesome chip Dumo! How much vcore to run a couple passes of linx?

[SonDa5]

I have same batch 3226B987 look my pics on this thread , is very lower Vcore clocker...but unfortunately is Hot days on Buenos aires today 35C! tomorrow 34C i can't push it more with this hot days

My 3570k works great at low voltage up to around 4.6 GHz but any higher and mass voltage is needed.

[Ivanqu]

3570k L211B226 PCB SN 0053 best batch

PSC DUAL CHANNEL AIR 3000+ mhz http://valid.canardpc.com/show_oc.php?id=2569726

MFR-PBC DUAL CHANNEL 2933mhz Air http://valid.canardpc.com/show_oc.php?id=2571034 2933 boot

MFR-PBC SINGAL 8G Air 11-14-14-35 1t 3000mhz http://valid.canardpc.com/show_oc.php?id=2558614

SAMSUNG 8G*2 HCH9 2640MHZ http://valid.canardpc.com/show_oc.php?id=2558890

SAMSUNG 4G HCH9 3100MHZ AIR http://valid.canardpc.com/show_oc.php?id=2575543

SAMSUNG 4G*2 HCH9 3073MHZ AIR http://valid.canardpc.com/show_oc.php?id=2575694

@LN2 6.887G 4CORE http://valid.canardpc.com/show_oc.php?id=2549013




PSC 2933 1T BOOT 11-14-14-40 1T



MFR PBC 2933 2T BOOT 11-14-14-40

[SonDa5]

3570k L211B226 PCB SN 0053 best batch

I don't think there is a best batch with IB. Just seems to be a luck of the draw found on any particular batch order.


My IB 3570k batch 3204B958 which I purchased at release date back in May does 4.5GHZ at 1.15v with Gskill Ram at XMP settings of 2400mhz CL10. With water cooling.




To me it looks like a good set of ram and sub ambient temp cooling is needed to see max performance of any IB cpu.

[Dumo]

3224B259 *A3129 fully clothed on H20

[andressergio]

Great chip bud !!!

[andressergio]

3226B939 1.27V 4c/8t on H20

impresive my friend !!!

[flesheatinvirus]

Very nice chip, my latest totally sucks in V compared to that one. Binning continues.

[Dumo]

3224B259 *A3129 fully clothed on H20

PSC tight




Samsung

[hersounds]

It's not 1.32 vcore but for cheap WC ( antec khuler 620 + Spring time on Buenos Aires + Full Bank Dimms ) I think is right

3226B987

[Dumo]

^^Awesome cooler, I used the same

[hersounds]

Thanks Dumo another run


Cinebench running



Cinebench finished



LinX running



LinX finished