[XS] GTX TITAN Owners Club

[zupernico]

Thanks Dacop,

I could flash the bios, but I had no improvement. I set the power limit to 120 and the fan in auto, but nothing. The same or worse . The bios is good and i?m bad??, I do something wrong?

I try with another BIOS? which?

[Net]

new result ? common

[zupernico]

Thanks Dacop,

I could flash the bios, but I had no improvement. I set the power limit to 120 and the fan in auto, but nothing. The same or worse . The bios is good and i?m bad??, I do something wrong?

I try with another BIOS? which?

I flashed the other titan, nothing, the same, do not get better results, what I done wrong?

[cowie]

I flashed the other titan, nothing, the same, do not get better results, what I done wrong?

Nothing you done right.

[zupernico]

Nothing you done right.

I do anything right? Can you explain to me??

I have two gigabyte, I can use the bios from EVGA SC Signature? would win something?

[cowie]

You did nothing wrong

I would think it would be ok to flash different makers

[zupernico]

ok, thanks Cowie,

then increase the power limit is not useful for overclocking in this gpu?

But if it does not improve voltage, the overclock will not get more than the initial bios?

[CryptiK]

We are still trying to figure out WTF is going on with the power limit, I am starting to think it's hardware capped..........been really busy with work though haven't had a thorough look in the bios.

[zupernico]

We are still trying to figure out WTF is going on with the power limit, I am starting to think it's hardware capped..........been really busy with work though haven't had a thorough look in the bios.

CryptiK thanks for working on it. Wait for the results.

We are still trying to figure out WTF is going on with the power limit, I am starting to think it's hardware capped..

I hope it is not so!!

[kromosto]

come here at price of 1326 usd . card is very tempting but too expensive i can get a second 7970ghz from 526. want this too much but i am passing this

[andressergio]

come here at price of 1326 usd . card is very tempting but too expensive i can get a second 7970ghz from 526. want this too much but i am passing this

well dont worry here are like 1600 lol and i agree with you get a second 7970 i would love an SLI of titans but NOT at this price man ridiculous

[Ximi]

ok, thanks Cowie,

then increase the power limit is not useful for overclocking in this gpu?

But if it does not improve voltage, the overclock will not get more than the initial bios?

If you increase power target but not increase voltaje , the power is the way of overclock or simple one more of ecuation ?

Waiting for increase voltaje and keep pushing !!

[cowie]

speaking of voltage

poparamiro from lab501 was nice enuogh to post this



http://forum.lab501.ro/showthread.php?t=21&page=9

Got it done tests today
But word from ftw is so so results

[CryptiK]

Yeah power limit still kicking in yo. Remember TiN mod 680 for power limit bypass This should be next mod.

[cowie]

Got that one done already
Testing vmod now but i think i will still hit pl.
Perfect timing i was starting to get borded with the card,this should add some playiblity if it helps or not

[CryptiK]

Be good to see some results

[Ximi]

Waiting for results of Vmod and how affects to clocks high to limit !!!

[cowie]

Well i hope that everyone has better results then me.
38k ohm gives me .92v 2d up to 1.26v 3d that is when it stays there
vread i use in the ss a few pages back
Well at least i found a way to run 950 3d at only 1.08v,but thats not what we are after is it

[CryptiK]

Sucks? ^ surprised the power hard mod had no effect. what does TiN think?


Some quick 3-way action Cards stock @ 1045 MHz / 990X @ 4.7GHz

[cowie]

Holy sheet thats sweet you have three

Just testing up to 1.27v

Can run up to 1296 60% of the time with clocks going as low as 1189.
tried with pt mods but after vmod i had bad throttle i took them off and put the bios from cryptik just to see
how that was.
.
I'd have to leave ram clocks alone to run the core up to get anything over 1250 to run 1.27v is all i tried
Heaven was being bad to me at this point



tried to split the c/m power balance some



Not to sure how much i'd put into these digi vrm or not but 1.30v should be ok if you get over the pl
i did add a 4 inch long 15 cm wide heatsink on the back of the card it gets hot there.



Gives me something to play with so i am happy good results or not

[CryptiK]

Yeah I have 3 for a short time, I'm selling the 3rd one. We still have no stock here after the initial run sold out and although it's better for Crysis 3 to have 3 no way can I justify the price.

Really sucks about the throttling! There must be hardmod that can be done to reduce the power draw the card is seeing, but the odd thing is they seem to be throttling earlier than theyre supposed to and no matter where you slide the TDP or temp slider it makes no difference, people are getting throttling at 60*C at 90% TDP - ManuelG from NVIDIA says they have reproduced the problem over on Geforce forums, hopefully a new bios can fix it, so that may help too.

[aussie-revhead]

New PB for me:

P15225 http://www.3dmark.com/3dm11/6152524

Thats at +200 using the Gigabyte utility, what are you guys using? Aftreburner? I miss the monitoring as OC Guru has none.

Cowie - where did the volts come from? Hard mod? I am water cooling mine so a little more volts would be great.

[emertX]

Which mod have you done for 1.27V?

[CryptiK]

He posted a pic guys of the vgpu mod a few posts back. Post 138.

Nice score there aussie Sure you don't want to try SLI, I know where there's a card, your wife won't even notice

[emertX]

I need it in more detail!