New E6600 batches, post your Overclock

[sreedx2]

anyone with a newer Conroe batch please post your Overclock, voltage under load and batch please

[GAR]

newer batches have been bad for me, other people have had good ones, but most are bad.

[keldererik]

So, from when is it called a new batch? a little more specific plz

[sreedx2]

Well I don`t know anything over 35 maybe .. my brother`s 32 is good but I do not know when they started getting worse

[largon]

E6600 L636A229:

3.5GHz @ 1.413V ORTHOS 10h+ @ 52ºC.
3.6GHz @ 1.47V ORTHOS 8h+ @ 58ºC.
Watercooling.

vCore measured with DMM.

[Infa]

E6600 L644G280

3.8ghz @ 1.60 (Vdroop) 51c
4.0ghz @ 1.70 (vdroop) not stable at all

think maximum is somewhere between 3.8 - 3.9 ghz

all is on watercooling, i will by a Striker board soon and will see how it works on that, with some more vcore!

[largon]

Infa,
I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?

[XenatR]

my new E6300 is pretty bad. cant really get more than 2.91

[Infa]

Infa,
I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?

Nope, thats under hours of Orthos , iam Idleing around 20c

regards

[largon]

That's very impressive temps you got there.
What's your ambient?

You using Coretemp or what for the temp readings?

[RealTelstar]

The "G" batches seem to be very good

[[XC] 4X4N]

You must be running in 10c ambient and have ice water in your loop for those temps with 1.6 vcore.

[redrol]

L64F040 SL9ZL Malay from newegg about 2 weeks old

about 3.2ghz max with 1.5v vcore (ty)

[largon]

[XC] 4X4N,
OR he's using an inaccurate temp monitor software.

[Getttosmurf]

nah 1.6v 50c load seems right on the spot with good watercooling gear.
Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
wc gear in sig

[Infa]

yeeep, iam having good gear, look at my sign.
and no , not faulty monitoring programs, iam using Coretemp 0.95 (latest)
and TAT and everest, tat is showing a TAD bit higher temps, but also lower LOAD temps, soo iam just trusting coretemp. and idle is at TOTAL idle 20c, and surfing and usual use its about 25.

my ambient is 20c soo .. and its lapped, dont think it did so much..but anyway cant hurt

but i want to get higher, can boot and load windows at 4ghz, but it needs more vcore! and p5b is not giving any more than 1.7....soo striker is coming up!

Regards

[Tuppen^^]

Hmm.. I got a week 32 chip, so I don't know.. :P
Hasn't Intel made any in 2007? If they have made E6600 chips will the stepping then be L7xxx?

[elsupremo]

Wow, very nice temps and overclock Infa. It would be amazing if you could hit over 4.0 on the Striker with your setup.

[largon]

Infa,
Where did you buy your D-Tek FuZion? I'm feeling it's time to upgrade my cpu block.

[Infa]

why would it be amazing?

it boots and crashes at 4ghz when iam trying to stress it ...and it can handle surfing and superpi at it... its that tad of vcore it needs to be stable! 1.80 maybe! and it wont overheat at it either ...so i dont see the problem, just happiness well well ..sallory isnt due to 25:th so i will have to hold my horses until then cheers!

[Infa]

Largon,

I did buy it from petra's aswall as the mcw60 block.
maybe iam in for the Apogee GTX block, but i want to see nikshub's testing first to be really sure i have become OC addictive! hehehe this is bad for my karma and economy :P

[mascaras]

nah 1.6v 50c load seems right on the spot with good watercooling gear.
Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
wc gear in sig

yep , my E6600 L628B (B = HOT) with 130€uros watercooling Kit


E6600@ 3600mhz --- Temps FULL







Ontopic: anyone already tested a L639F ????



regards

[Garrett]

Those are extremely LOW temperatures for full load... omg.... what wc kit is it anyway? specs plz
and IHS still on?

[Getttosmurf]

largon vcore.dk has the d-tek fuzion a little closer to where you live = ) about 100$ though

[Infa]

And Coolerkit.dk has the GTX

and well with 3.6 i can lower my vcore to that too! heh and get that temps! OC it over that vcore and he will NOT get that TEMP!