The green water of class

**Corsaronero333** · 03-09-2012, 10:36 PM

Hello I introduce myself my name is Ermanno I love modding and now I want to present my work.
I hope you like it, the path will be 'long.
It takes time ideas and furthering your friends crazy.
The project is in most 'parts, the first will be' all the components in brushed stainless steel
I apologize for my English but I'm 'using google translator

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:37 PM

After 2 weeks the pieces arrive ......
Still from the film wrapped and ready to be reshaped as needed.

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:37 PM

Eheheheheh is beautiful ...... but the change is coming.
First of all I have to remove the upper part of the support, because hides too much HD or SSD, so doing I take this opportunity to drill further supports aloggiare SSDs also in more 'I have to drill and countersink the bottom then I'll need' for anchor at the base, after threading from M3

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:38 PM

And here is the base perforated with 2.5 mm drill bit and threaded M3, the glazing was buffing because the original in my opinion was a little 'too, I made ??more so by the' soft, you'll notice the rear two special screws that are intended to guide the upper support

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:38 PM

From here begins the frenzy to see how it comes out, and basically makes' her dirty figure, everything fits perfectly

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:39 PM

As last working, I just have to remove all sharp edges with a file, mount the rubber

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:39 PM

And after many adventures here we are with the supports of the SSD mounted

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:49 PM

And here is the second processing, brushed stainless steel.
This keeps the same basic design as that of HD but change its width, the top will be slightly extended to cover the whole frame of a possible DVD.

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:50 PM

Before starting work, I have to drill through with a peak of 2.75 and then threading from M3 and countersink the screws where they will go to find accommodations.

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:50 PM

All parts including the base will be retouched with sandpaper to reduce the sign of the original glazing, considered excessive

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:50 PM

Assembling the various pieces

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 10:51 PM

Uploaded with ImageShack.us

**Corsaronero333** · 03-09-2012, 11:09 PM

This process includes the slot for USB3 and keys power / reset

**Corsaronero333** · 03-09-2012, 11:10 PM

and already 'there are even support for VGA etc. ...... course of the locking nuts are Dimastech

**Corsaronero333** · 03-09-2012, 11:10 PM

Here are the three pieces of wood that will undergo many changes and processes over the whole mod

**Corsaronero333** · 03-09-2012, 11:11 PM

Small steel accessories that are part of the mod

**Corsaronero333** · 03-09-2012, 11:11 PM

Small components and panel for ventilation

**Corsaronero333** · 03-11-2012, 06:34 AM

And here's the first beta of the banquet, missing all the accessories to be, more 'to integrate a liquid cooling system.
The EVGA Classified is only for demonstration purposes, the mod will be 'introduced the Gigabyte G1. Sniper2

but that will take wood 'na deadly transformation

**Corsaronero333** · 03-11-2012, 06:34 AM

And here is the presentation of Murano glass that will replace the wood, which served as a champion for drilling and shaping the glass.

-------------------------

--------------------------

**Corsaronero333** · 03-11-2012, 09:00 AM

Assembly and before vision glasses Beta

---------------------------

----------------------------

**Buckeye** · 03-11-2012, 09:03 AM

Looks fantastic !

**MisterMagoo** · 03-11-2012, 09:06 AM

Wow....

Very impressive, looking forward to seeing more.

**Corsaronero333** · 03-18-2012, 12:28 PM

Originally Posted by Buckeye

Looks fantastic !

Originally Posted by MisterMagoo

Wow....

Very impressive, looking forward to seeing more.

Thanks guys hope to see you in a bit of new up

**Corsaronero333** · 03-24-2012, 07:52 AM

As soon as I can see you can place the arrival of the material, in this case we speak of the sleev NILS, to stay in theme colors I preferred to take the black, bottle green and finally green light, I think it will come a great job now we just have to wait for the arrival of the power supply ........ who will?

**Leeghoofd** · 03-24-2012, 08:06 AM

Very nice work man !! looking forward to the finished build

Thread: The green water of class

Thread Tools

Search Thread

Rate This Thread

Display

The green water of class

Bookmarks

Bookmarks

Posting Permissions