Page 66 of 72 FirstFirst ... 165663646566676869 ... LastLast
Results 1,626 to 1,650 of 1781

Thread: SuperPi32m 5Ghz Ivy All Out Challenge!

  1. #1626
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    Quote Originally Posted by angoholic View Post
    Awesome!!

    As Aristidis did his BBSE result with 7-9-6-18 i thought this could be the best combo if you have sticks that could do the job. If you have 4 of them and an IMC that can handle it (tightened timings with BBSE x4 push the imc a lot more than PSC) you could "easily" do the magic 15.
    Never have I found an Ivy cpu /board that could run (even boot) 4 dimms of BBSE at even the air template of 8-11-7-22 at 2600 as it is very hard on the IMC, but you are correct that setup would be the winner.

    Pretty crazy to think the cut off for top 10 is 16:16:5xx

    So as well all know it is getting closer and closer to June and it is about time for that thread

    Any ideas we can use from this thread to improve the new one would be a good thing to discuss.
    Last edited by l0ud_sil3nc3; 05-06-2013 at 10:18 AM.
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  2. #1627
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Germany
    Posts
    220
    Hm i could upload some 16:4xx to 17 as well but as it is often only waza dependent i would prefer only new entries if settings varied significantly. Boot no problem, but tight timings + load are the reasons for pushing imc to the limit, in addition to the raw freq.

    my old one with 2nds:

    [SIGPIC][/SIGPIC]

  3. #1628
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Thanks guys and thank you Don_Dan for keeping thread updated

  4. #1629
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    thinking of trying these 1600 6-8-6 bbse on cold just for kicks . unstable much passed 2333mhz 8-11-8
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  5. #1630
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    just broke into the .1**'s going for .0**'s now, will upload video and pics in an hour
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  6. #1631
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Germany
    Posts
    220
    [SIGPIC][/SIGPIC]

  7. #1632
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  8. #1633
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    bring it to Murica Splave!
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  9. #1634
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Splave - 6:16:109 - 46x108 - 1304MHz - 7-9-6-18-58-1 - ASROCK OC Formula - Avantium 2133c9 2x2gb/BBSE - 2.1v - CPU SS @ -50c Mem LN2 @ -150c



    Little tighter, little more trefi and better wazza technique...did not see 1 error message all morning at this settings and remember this does not work 2400 8-11-7 32m fails loop 10 on air.
















    have a run at 6:16.110 that started much faster and last loop was very slow, gotta keep trying
    Last edited by Splave; 05-07-2013 at 09:57 AM.
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  10. #1635
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Germany
    Posts
    220
    awesome run, well done!
    [SIGPIC][/SIGPIC]

  11. #1636
    Xtreme Addict
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,246
    well done splave!

  12. #1637
    Registered User
    Join Date
    Feb 2013
    Location
    Romania
    Posts
    2
    Great job! Sick run.

  13. #1638
    Xtreme Enthusiast
    Join Date
    Jul 2010
    Location
    Berlin, germany
    Posts
    509
    Let?s hope he doesn?t start using good BBSE, or all are doomed - grats

  14. #1639
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Location
    ROMANIA
    Posts
    687
    Avesome, congratulations!
    i5 2500K@ 4.5Ghz
    Asrock P67 PRO3


    P55 PRO & i5 750
    http://valid.canardpc.com/show_oc.php?id=966385
    239 BCKL validation on cold air
    http://valid.canardpc.com/show_oc.php?id=966536
    Almost 5hgz , air.

  15. #1640
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Great run, Splave! First post updated!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  16. #1641
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Quote Originally Posted by websmile View Post
    Let?s hope he doesn?t start using good BBSE, or all are doomed - grats
    good bbse is in the eye of the beholder
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  17. #1642
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Nice work Splave,awesome run.Guess its my turn now,should have a refill soon see what I can come up with

  18. #1643
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,523
    "5G 6m 16s flat or faster" race start
    Last edited by Dumo; 05-07-2013 at 03:31 PM.

  19. #1644
    Pie assassin
    Join Date
    Nov 2007
    Location
    Where lights collide
    Posts
    2,275
    Quote Originally Posted by Splave View Post
    good bbse is in the eye of the bbseeholder
    corrected.

    Quote Originally Posted by Dumo View Post
    "5G 6m 16s flat or faster" race start
    count me out.... 3770k i picked up yesterday does 5ghz @ 1.5v and the imc is complete doodoo wont even 2800 at all... using single sided kingston 2333 bdbg. really easy it is to use these sticks for max valids, 2800 is a cake walk if the imc can do it. ive never topped out the sticks, only the imc.
    Last edited by ZenEffect; 05-07-2013 at 03:47 PM.
    Current Status - Testing & Research

  20. #1645
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    OPA Awesome run mate!

    Itsa RRRRRRace-a

    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  21. #1646
    Xtreme Member
    Join Date
    May 2012
    Posts
    200
    I would like to see them both in one room with one 25L Dewar

  22. #1647
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    ^25L is barely getting warmed up

    Will be testing tonight I think even though I am a bit short on the juice, finally started to dry up around here lol
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  23. #1648
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,523
    Gotta run quick, humidity is rising in east and west coasts. Lol

  24. #1649
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Try some rips tomorrow, got 5l left then will run and get more on my lunch break. Can't stop till 15s
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  25. #1650
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Quote Originally Posted by l0ud_sil3nc3 View Post
    ^25L is barely getting warmed up

    Will be testing tonight I think even though I am a bit short on the juice, finally started to dry up around here lol
    Only mater of time mate and I'm sure we going to see some awesome times from you
    You know I think your a awesome Memory Overclocker.You paved the way now for tRCD9,-150 temps,cl6,we owe a lot to your thinking out the box.Tho I haven't got to -150 yet I'll be trying next time around

    @Splave I give you hug bro cause that is a sick run,love you dedication bro
    Last edited by bullant; 05-07-2013 at 06:43 PM.

Page 66 of 72 FirstFirst ... 165663646566676869 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •