can you tell us the name of the vgpu chip?
Out Of Specs -- Cyprus Department
My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's Case: Modified RocketFish Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
hi
who did vmod on this card. I can find read points and vmod point (mem and gpu).
twintech 8800gt xt oc mem samsung
Last edited by nierealny; 07-10-2008 at 10:34 AM.
Anyone know how to mod an Axle 8800Gt non reference pcb ? i made a thread and i am pissed off that i cant mod this card
here is the thread
http://www.xtremesystems.org/forums/...d.php?t=194364
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
thanks HitandRun i appreciate it
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
here is the VCore mod For the Axle 8800Gt with the zerotherm cooler Confirmed it works with a 50k Vr but she has overvoltage protection @ 1.3Volts now i have to find the ovp mod :p
Last edited by Vatos_locos; 07-13-2008 at 01:17 AM.
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
At 1.26Vcore (load) she can go up to 780Mhz Artifacts free with ati tool and 800 for benchmarks but i need to solder some cap's on the coils she have some huge spikes between Vantage tests wile she change 2D to 3D voltages and sometimes she goes at 1.3 and the ovp kicks
i think i found how to override the ovp and set it @ 1.62V but i'am not at home now to test it
for the Vcore measure point i used one of the cap's leg next to the pwm coils and it seems accurate 1.1 with the mod off
Last edited by Vatos_locos; 07-13-2008 at 10:12 AM.
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
i did the 1.1v bios mod to my xfx and now i can go up to its looks like 800/2000 maybe higher, if i had better cooling. im on the stock heat sink for now, im waiting for my MCW-60 & D-Tek Fuzion to show up. but im happy for now @ 780/1950/2100 on the stock heatsink
My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's Case: Modified RocketFish Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
so i have a very crappy card :S
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
From my good experience, these cards are not worth watercooling. Thermalright HR-03 performed same as MCW-60 even though the latter loaded +10C less. But Going from stock -> MCW-60 should be great . These cards are limited by 2-phase PWM. Unless you cherry pick your card, don't expect miracles with better cooling. Get a good 120MM and cool the back of the card. @Vatos_locos, forget about the coils, it's worthless and silly. I recommend soldering extra _low esr_ capacitors in parallel to even out the spikes.
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
i have the card on water because i have build my case this way so the has a dedicated loop and the cpu an other on
will do with the caps
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
Thanks Man but first i need to do the ovp mod witch i don't know how lol
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
i use the same bios from xfx i can get the core 800Mhz only if i keep the shaders @ stock and the mems @ 1000Mhz but my card had 1.1 V by default :/
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
i need to check what mine is at. Some guy flashed his bios to 1.2v's btw.
http://www.overclock.net/2966590-post8.html
Although his clocks kind of sux, since your getting 800mhz with lower v's.
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
i need help too i can' find the ovp mod for my 8800gt and i cant go over 800Mhz without it
anyone can help ?
i will post a pic of the voltera when i go home but i don't have a good camera if anyone has an Axle 8800Gt if he could take a good picture for me plz
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
anyone ? i know the pin for the ovp what should i do :p ?
ovp pin to ground is 104KΩ
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
Bookmarks