Great triple SLI 480s result Boadar!
Great triple SLI 480s result Boadar!
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Thanks so much Nick and Linuxfan!! I did a test once with 4 gtx 480's on air and a 5700mhz cpu clock.. It was also decent.. about 176k.. Maybe there is a 4-way sli gpu frequency combined with a 6200mhz+ that may be good as well.. Or just bump the cpu up to 6400mhz and use 3 of these on ln2 at below 1100mhz.. Maybe 1050 might be good.. I dont think anyone is going to beat Nicks 217k score though. that's really awesome!!
Thanks Brolloks for all the help on the IOH stuff!! Yeah! tek 9 slim.. There's alot of insulation tape around them.. Makes it look bigger I guess.
The bios I used was 704.. I think it's improved with the newer 3d bios.. Maybe I'll try that soon!! Thanks Hondacity!!
Thank you for your reply!!
In Japan, Ist delivery lot are rev2, 2nd delivery are rev1.
So I guess rev2 has any problem, now change there rev to rev1.
But as your info, rev 2 is beter than rev1.
I checked some HWBot ranking, SF3D's REX3 is rev1., other top ranker used rev2.
So rev1 & rev2 does not have many changes・・・・・?
Awesome score Bodar!!
Last edited by kurumi_Japan; 07-26-2010 at 09:23 PM.
Sorry for my english
LL A77F - Asus Rampage V Extreme - 5930K - Corsair Platinum 4x4Go 3000 C15 - Zotac 770 - SSD Samsung 850 Pro & 830
Pump D5 with mod Bitspower - EK Supremacy - Koolance GTX680 - HW Labs SR1 280 & EK XTX 360
Guys please dont trust cpu-z with these boards it isnt configured to read them properly, incorrect vcore and display.
[SIGPIC][/SIGPIC]
"realy magic isnt card tricks, big cribs and cars b1tch
its 6 gig vantage full pass without 2v sh1t" Young Pro
Are you talking about cb with the mobo.. If so, I tested an i7 980x yesterday and the mobo shut off at -110c Put my favorite chip in and I'm rockin for a few hours straight at -185c
I'm pretty sure I have one of the first retails as well.. Hey Nick.. Does the NB pot really help alot on the SR-2? Max clocks on vantage without it have been about 5400mhz so far with two x5680's..
ya , my good R3E all 1.04G
Chill Coldbug always make the offset voltage having some problem
Something like u set 1.7v in BIOS , but u only get 1.5~1.6v
and Some Chill Coldbug will make ur CPU coldbug moving .....
U can replace the mobo with ASUS , if u have such mobo with defective chill chip
[SIGPIC][/SIGPIC]
If i use only one VGA Card and CPU Water Cooling
which board give me high BCLK
Gigabyte X58A-UD7 or Asus Rampage III Extreme ?
Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
[history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K
I checkd my rev1 REX3(retail products ver) BCLK limit on air.
The mobo PCB rev is 1.04G, production month is 2010/06.
http://psycho999.blog38.fc2.com/blog-entry-310.html
BCLK=243.8MHz, QPI≒4400MHz
mobo cooling is only stock cooler.
I think rev1 is not so bad.
Last edited by kurumi_Japan; 07-27-2010 at 08:34 AM.
That's some nice BCLK with high QPI .
Did you test highest spi32m BCLK ???
I am very sorry, it just tested only high QPI BCLK limit.
For your reference, my 980X SuperPI 32m result.
http://hwbot.org/community/submissio...in_21sec_641ms
QPI≒4000MHz, BCLK≒180MHz.
It's not my ACE chip, just test new chip internal clock.
Last edited by kurumi_Japan; 07-27-2010 at 08:34 AM.
Bookmarks