Good job Kayl,very nice work mate.
Good job Kayl,very nice work mate.
Looks very good kayl - your work keeps improving all the time
thanxs very much guys, i really did like the getto days no so much competition just ppl posting getto builds. I remember when we first started brazing stainless steel suction line it was a bread through
QX6700 benching at -26c load -31c idle. seems no matter what vdroop i set vcore still droops with WPRIME 1024m run droops from 1.76v to 1.67v.
SPI runs are ok though, no droop
Vmem 2.4v and also 1.65v NB volts.
http://valid.x86-secret.com/show_oc?id=195760
Last edited by kayl; 05-08-2007 at 05:32 PM.
nice display Kayl, good find there!
Kayl you need to cut the side out ofyour case..i cant believe u didnt do it before you put it together....I ended up cutting a slot on side of my Vapo to let my Ls sit underneath nice and square..i couldnt handle the Angle trick any longer eheh....
Kayl i cant wait untill you get the 3/4 Compressor and to see if you could sqeeze it into your case been looking at all your builds here it might go close??
depends if u have that copper coily thing i suppose..the thing in front of condensor....
I couldnt see issue with rear fan mounted at rear of the case could you ???
then the only worry is GSMaster controller lcd screen being smaller than the hole..But i can Email John and ask him if he could send me over a larger LCD display to fill the Hole im sure he would.
Nice link /thread Cheers Hori
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
really great work i love it
one day i will learn to build this pretty things
OCFX do enough reading and you can build units. I learnt it all from XS
Yeah I had plans to cut a hole in the side of the new pc case, but just havnt got around to it. The case also has a clear window side panel so will look sweet when its finished and done properly.
Lets hope we can squeeze the 3/4hp compressor into a frozen SS case along with the starting gear( run and start caps as well as the relay enclosure, it will be tough, if need I might take the start gear out of the enclosure)
Yes the idea of having the rear fan on the back of the case will give us an additional 35mm room, we need all the room we can get. The issue with the LCD isn’t the window hole, it’s the LCD mounting holes are different to my current case, you can stick the LCD to the case like I did with this unit.
Because you have the push buttons for the controller on an extended cable we don’t have to drill holes for t hose. This is actually my last case left.
That lcd looks ok ...
rear fan at back will be just fine if it fits
Chat later
Cheers Hori
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Im so Xcited looks verry tidy Kayl.
i cant wait for the benchtesting pictures over the weekend...
Cheers Hori
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Little QX6850 action on single stage phase change with Gigabyte GeForce 8800GTS 320MB
Heres some results on air along with a QX6850 at 4420Mhz on a single stage cooler, managed to pick up a few points on Hwbot.
3Dmark 2003 - 39309 marks
3Dmark 2006 - 12653 marks
Aquamark - 215583 marks
3Dmark 2001 - 69410 marks
PCMark 2005 - 11381 marks
3Dmark 2005 - 20853 marks
idle
load -36c
Verry Nice kayl.. you been busy again buy the looks of it...
Did not take you long to mount up another cooler eheh
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Picked up my cases today.
GSmaster controller case
Basic unit with a on switch, k-type display and varible fan speed.
THis lot gets powder coated next year , just deciding what colours
Last edited by kayl; 12-21-2007 at 11:40 PM.
Bookmarks