Testing the UD7 on phase-change. Colder temperatures are the key for a high BCLK as well as having luck to get a good CPU. My 950 could only go upto 235MHz BCLK (phase and LN2), this 960 can do 240 on phase change
Testing the UD7 on phase-change. Colder temperatures are the key for a high BCLK as well as having luck to get a good CPU. My 950 could only go upto 235MHz BCLK (phase and LN2), this 960 can do 240 on phase change
Good pieter, we're also testing our 950+ud7 toward the end of march under ln2.. let's see if we can move on from 225bclk
next test
Asus RIVF - i7 3930k,
Gainward GTX570 GS GLH , Patriot 4x4GB XD2@ 1866 cl9
water cooled (EK SUPREME HF-NI, MCP655 + EK-Top, EK-250, XSPC RX480, BI GT 2x120)
TJ-07; ENERMAX Rev. 85+ 950W
GB P67A-UD7-B3 ; Rampage III Extreme - ; X58A-UD7; ASROCK Z68-extreme; GB Z68XP-UD4 ; GB X79-UD5
Hello
I have a slight issue and maybe this has already been addressed but i couldnt find any information so i made this post..
my 3.3v and 5v rails show perfect volts.. but the +12v rail shows 2.3-2.4v only when its idle. when i start the system stability test or OCCT then the +12v reading fluctuates between 8.8.-9.1v
This is the same with OCCT as well!!
But my system continues to stay on and i have run occt for 25-35 mins and no crash.
Tried the everest stability test for 15-20 mins as well and no crash.
I was really worried and didnt want to run my system with the thought of killing something with the really weird voltages being reported.
Until i saw a post on the lavalays forum of a guy who has the same problem i thought i had a messed up PSU ! but the fact that my pc was still on with only 2.1v on the +12v rail told me something was very fishy.
Strangely enough the bios and Easy Tune 6 reports 11.99-12.05v on the +12v rail.
any help would be highly appreciated
my system is :-
Gigabyte X58A-UD7 Motherboard
Intel Core i7 920
6GB Corsair Dominator 1600 CL8
Corsair TX 750 Psu
WD Velociraptor 300
WD 1TB Black x3
Nvidia GTS 250
Lian Li A77
Thanks a ton guys
Last edited by Toolius; 03-09-2010 at 06:28 PM.
I've use the other monitoring programs and observed the same thing which made me think my PSU was flaky so I hooked up the multimeter and tested it that way and just like the ET6 monitoring section the multimeter read perfect rails so I'm assuming either the other program are flaky or the dynamic energy saving thing is messing with their readings.
beta BIOS for improve memory 2:10 status
http://rapidshare.com/files/361591918/X58AUD7.BIN.html
hicookie
Last edited by stasio; 03-10-2010 at 12:04 PM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
it's f6x thx
Asus RIVF - i7 3930k,
Gainward GTX570 GS GLH , Patriot 4x4GB XD2@ 1866 cl9
water cooled (EK SUPREME HF-NI, MCP655 + EK-Top, EK-250, XSPC RX480, BI GT 2x120)
TJ-07; ENERMAX Rev. 85+ 950W
GB P67A-UD7-B3 ; Rampage III Extreme - ; X58A-UD7; ASROCK Z68-extreme; GB Z68XP-UD4 ; GB X79-UD5
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Will this MB boot with a X56xx(B0) out of box?
Anybody has tried this CPU on this MB, in case what BIOS would be the best?
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
Well well, F6x bios actually does what it says on the tin, (improves mem 2:10 ratio) my corsair dominator mem OC'd slightly at 2100mhz 8.8.8.24 timings (finally) with a cpu OC of 4400 with HT on at 1.36v
QPI 1.3v
VTT 1.535v
Mem 1.64v
I have survived a 3DMARK06 bench! When before it would not even boot up, good work Gigabyte, keep them coming! The mem issue was the only thing upsetting me about this mobo, Gig seems they are sorting it out well!¬
Had to bump up mem to 1.66v and now crysis is running well, dont dare do a Linx stress test yet though
Linx not stable at all even with sill amounts of volts for vtt, qpi
Last edited by lawtq; 03-11-2010 at 04:18 AM.
GA-X58A-UD7 - F6a
-released 08.Mar 2010
Note:
Previous BIOS F6a had been dated 22.Feb 10
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
F6x- 05.Mar 2010
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Thank you stasio, any change logs? will this bios have already the improvement in f6x for 2:10 ram?
i7 920 D0 | UD7 F7 | 6GB Corsair Dominator GT 1600 7-7-7 | HD4890 | WD 1TB | Antec Quattro 850w
Last edited by stasio; 03-11-2010 at 07:57 AM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Hello, i did f6x bios today, everithing fine, 4.2 1.25v stable, but i can't get more then 211 bclk, the pc doesn't give any image, i've already try with another multi, but always give me the same, black screen! It is possible to fix this problem?
F6x is not the last bios?! F6a last one?! A before X, i'm not understanding.
My bios config is this one:
GIGABYTE GA-X58A-UD7 - bios F6x
MB Intelligent Tweaker(M.I.T.)
Advanced CPU Features {Press Enter]
CPU Clock Ratio............................: 21
CPU Frequency .....(Ghz)...................:4.2
Intel(R) Turbo Boost Tech..................:[Disabled]
CPU Cores Enabled..........................:[All]
CPU Multi Threading........................:[Enabled]
CPU Enhanced Halt (C1E)....................:[Enabled]
C3/C6/C7 State Support.....................:[Disabled]
CPU Thermal Monitor........................:[Enabled]
CPU EIST Function..........................:[Enabled]
Bi-Directional PROCHOT.....................:[Enabled]
Virtualization Technology..................:[Enabled]
Uncore & QPI Features [Press Enter]
QPI Clock Ratio*...........................:36
QPI Link Speed* ......................(Ghz):7.20
Uncore Clock Ratio.........................:x17
Uncore Frequency......................(Mhz):3,400
Isochronous Support........................:[Enabled]
Advanced Clock Control [Press Enter]
>>>>>Standard Clock Control
Base Clock (BCLK) Control*.................:[Enabled]
BCLK Frequency (Mhz)*......................:200
PCI Exxpress Frequency (Mhz)...............:105
>>>>>Standard Clock Control
CPU Clock Drive (mV).......................:700
PCI Express Clock Drive (mV)..............:700
CPU Clock Skew (ps)........................:0
IOH Clock Skew (ps)........................:0
Advanced Dram Features [Press Enter}
Performance Enhance........................:[Turbo]
Extreme Memory Profile (X.M.P.)............:[Disabled]
System Memory Multiplier (SPD).............:x8
Memory Frequency (Mhz).....................:1,600
DRAM Timing Selectable (sPD) ..............:[Quick]
Channel Interleaving.............................:6
Rank Interleaving.................................:4
Channel A Timing Settings Sub Menu [Press Enter]
>>>>>Channel A Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel A Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto] 19
tWL..........................................:[Auto] 7
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) .....................:1
>>>>>Channel A Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................:[Auto]
Channel A Turnaround Setting [Press Enter]
>>>>> Channel A Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Channel B Timing Settings Sub Menu [Press Enter]
>>>>>Channel B Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel B Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto] 19
tWL..........................................:[Auto]7
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) ..........................:1
>>>>>Channel B Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................: [Auto]
Channel B Turnaround Setting [Press Enter]
>>>>> Channel B Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel B Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Channel C Timing Settings Sub Menu [Press Enter]
>>>>>Channel C Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel C Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto]
tWL..........................................:[Auto]
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) ..........................:1
>>>>>Channel C Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................: [Auto]
Channel C Turnaround Setting [Press Enter]
>>>>> Channel C Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel C Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Advanced Voltage Control [Press Enter]
>>>>CPU Voltages
LoadLine Calibration.........................:[Level 2]
CPU Vcore....................................:1.25000v
QPI/VTT Voltage..............................:1.375v
CPU PLL......................................: 1.840v
>>>>>MCH/ICH Voltrage
PCIE.........................................: 1.54v
QPI PLL......................................: 1.22v
IOH Core.....................................:1.18v
ICH I/O......................................: 1.50v
ICH Core.....................................:1.14v
>>>>>Dram
DRAM Voltage.................................:1.60v
DRAM Termination.............................: [Auto]
Ch-A Data Vref...............................:[Auto]
Ch-B Data Vref...............................:[Auto]
Ch-C Data VRef...............................:[Auto]
Ch-A Address Vref............................:[Auto]
Ch-B Address Vref............................:[Auto]
Ch-C Address VRef............................: [Auto]
My hardware:
GA-X58A-UD7 - F6x
I7 920@4.2 1.25v
Gskill F3-12800CL8T-6GBPI
XFX 850W Black Edition
Corsair H50
Gigabyte ATI 4870 1gb - gv-r487d5-1gd
Last edited by FrenchPcdiga; 03-11-2010 at 07:31 AM.
Hi,
Are there any users here that switched from Foxconn Bloodrage or Evga 760 Classified to this board?
I am trying to choose between these 3 motherboards for my build.
How important is the usb 3 and sata 6gb support in your opinion? I definitely do not have any devices to make use of it now.
I know this is a Gigabyte thread but I would appreciate everyone's honest opinion.
Thanks!
Hard mod was needed for my Q4EG to fire up
There seems to be OCP kicking in around 5.5ghz with all cores loaded. I can drop cores and scale higher on vcore.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
5.5GHZ is great.
Q4EG is a B1, right? and do you have a link to more info on that mod?
I've been wondering if this Mb could boot up with a X56xx B0, but haven't got any confirmation, yet.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
Yes, I went from Evga E60 to UD7, the E60 handled memory better, but UD7 is sorting itself in regards to mem with each bios. The UD7 I find slightly more stable maybe due to its better 24 phase power design, and a cooler board in regards to temps, theres not much in it though, you wont be dissapointed with either
X58A-UD7 & UD5 Modification for Gulftown pass high clock
early test with Q3QP, near 6GHz vantage.
http://www.youtube.com/watch?v=OBQeFNjE42E
im not the guy do tweaks in pi, but effiency very nice in Super pi
Bookmarks