eva - how did you determine those secondary and tertiary timings please ?
going to give them a go as you are at much lower volts than me I'm using manual for primary timings and for tWCL - but all rest are on auto/spd on my Gene V
thanks
eva - how did you determine those secondary and tertiary timings please ?
going to give them a go as you are at much lower volts than me I'm using manual for primary timings and for tWCL - but all rest are on auto/spd on my Gene V
thanks
Heatware Cecil
I don't think the memory or Z68 Maximus IV Gene-Z board or my 3570K IMC is allowing me to do 2256Mhz 9-9-9-x. Just updated Maximus IV Gene-Z from 3305 to 3402 bios, so re-testing again. Probably, need to really test this on Z77 board to be sure.
I bought 5 pairs of Samsung Greens all 1149 batch. There is a variance in behaviour between each pair. I have 2 pairs which at low volts 1.4v onwards scale nicely at 10-10-10-24 1T all the way to 2310-2314mhz then need 11-11-11-x all the way to around 2380-2389mhz. Then I have 2 pairs that clearly at lower 1.4v volts need 10-11-10 or 11-11-11 from 2200mhz and scale to around 2349-2365mhz.
I have yet to really touch secondary and tertiary timings yet (besides tRFC below), just getting a feel for primary timings and frequency headroom each pair of Samsung Greens has based on voltage/vrm adjustments alone first.
Switched cpus from 2700K Sandy Bridge to 3570K Ivy Bridge for higher memory divider support
- Core i5 3570K L208B104
- Corsair H50-1 H20 cooling
- Asus Maxmus IV Gene-Z 3305 bios
- 2x 4GB Samsung DDR3-1600 MV-3V4G3D/US 30nm
- Sapphire HD5870 flashed to Asus bios
- 80GB Intel X25-M SSD
- 1200W Silverstone OP1200
DDR3-2266Mhz 10-10-10-24 1T at 1.4875v
DDR3-2291Mhz 10-10-10-24 1T at 1.4875v
DDR3-2303Mhz 10-10-10-24 1T at 1.5000v
DDR3-2308Mhz 10-10-10-24 1T at 1.5500v
DDR3-2314Mhz 10-10-10-24 1T at 1.6000v
edit: wow, Maximus IV Gene-Z 3402 bios really changed things for the worse, having difficulty even booting at 1866mhz regardless of timings http://rog.asus.com/forum/showthread...untry=&status= !
Last edited by eva2000; 06-24-2012 at 10:43 AM.
---
I look at the changes that I get in this only when tuning for a single speed. That said, once you change speed you can then start over and, once tuned, compare results with the previous set.
My primary result to look for is the copy number but I cannot remember what it is that I read to make me take that decision.
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
guys does going over 1,65vdimm for daily use my hurt IMC on IVY ? i have team X 2400 CL9 and Patriots can run perfect 2400 to 2500 tight but i want 2600 and they do pass hyperpi but fail memtest i need to pump VTT and VCCSA and VDIMM over 1,68 can use it for daily or will harm IMC ???
thanks in advance
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Got it working on mine, and on Gig and Asrock boards as well. 1.01.6
Heatware Cecil
Got mine the other day. Haven't been able to use them yet though.
New board doesn't have a PCI lane and PCI doesn't work with PCIe (didn't know that) so now I have to buy a new wireless adapter
Man these things are short though.
Carnage
[Silverstone TJ11] [Silverstone 1200w]
[EVGA Z77 FTW] [I5 2500k] [8gb Samsung 30nm]
[Sapphire HD 7970]
[Sound Blaster Titanium HD] [Sennheiser PC360]
[Patriot Wildfire 120gb] [Seagate 1.5tb 7200pm]
[Steelseries Sensei w/ I-2 Mousepad] [24" 1920x1200 Samsung]
Thought I'd throw my hat in the ring with these HYK0 sticks. I've been testing on my RIVE+3930k setup. Unfortunately I couldn't do 1200MHz 9-11-11 like OnePageBook could, but I managed 11-11-11-28 1T with untweaked subtimings at 1.56v for HyperPi 32M stability.
42x100BCLK_HYK0_1200MHz_11-11-11-28-1T_AIDA64.JPG42x100BCLK_HYK0_1200MHz_11-11-11-28-1T_HyperPi32M_Times.jpg42x100BCLK_HYK0_1200MHz_11-11-11-28-1T_HyperPi32M.jpg
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
Play with Vccio, Vccsa, transmitter slew and receiver slew. 2400 9-11-11-28 should be possible with 1.65V. I will sure try when my sticks come in from RamExpert.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Which board do you have and what week are your sticks produced?
Opb used a Maximus V Gene which is notorious for it's ram clocking abilities.
Week 5 seem to be the favoured production week for these sticks altough i've been told all sticks from 2012 should be fine.
Edit: I see OPB used a Rampage IV Extreme so on the MVG it should be even easier!
Last edited by Zeus; 07-16-2012 at 04:27 AM.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Sammy weeknr.png
In the red square.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
My two 1205 sticks won't even boot at 9-11-11-28.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
What voltage did you try?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
I tried 1.65v. Didn't go over that as these sticks don't seem to like high volts.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
My 1205's run nice up to 2200 either slack ON low volts or tight (CL8) & high volts on my UD5H then depending on timings/volts you can get them prime stable up to 2300 fairly easy. 2300 ~ 2380 they run but I have trouble booting sometimes they fine other times no go. 2380 + single stick runs & boots fine here's a suicide shot just to see what one stick could run..... shame I can't get 2 sticks like this.
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
Bookmarks