Lamagra TJ07

[Traxtorm]

Hello guys,

Im new here as you can see
Im gonna make my second build in a few years.
This time with a TJ07 called "Lamagra"
It's a long project running because slowly building it up, so be patience.
I've already start this build on the highflow forum in The Netherlands.



Hardware list:

* i7 965 XE (ES)
* ASUS Rampage III Extreme
* 6GB Corsair Dominator GT 1866Mhz CL7
* EVGA GTX275 FTW in SLI + Backplates
* 2x OCZ Vertex 2 60GB SSD
* Enermax Revolution 85+ 1250W
* Silverstone TJ07B Custom (Inverted Vertical)

Watercooling list:

* Watercool HeatKiller Rev. 3.0 Nickel/Black
* Koolance PMP-400 + Phobya Top Silver Nickel + HTS-PMP400
* Koolance VID-NX275 Blocks
* XSPC RX480 Radiator + Stand + GT 1850RPM
* XSPC RX240 Radiator + Stand + GT 1850RPM
* Koolance or Bitspower chipset block
* IandH Stealth Reservoir 225mm
* Primochill 5/8 - 7/16 Red/Clear (also maybe black)
* Bitspower fittings

Mods:

* Leds for power/reset replacement blue -> red Done!
* Custom Backplate/Faceplate/Midplate Done!
* Black coating inside.
* Window placement. Done!

PS: not all the parts are called in the lists.

Here a custom pic for the faceplate with GX Typhoon LCD



So here are the photo's
With some description if needed..

The window that I made with the dremel, looks good what I did so far







GTX275's got some blocks on it





Also with EVGA backplate



Some radiators from XSPC





The HK3.0 Nickel



The beautiful Enermax Revo 85+ 1250W



To this..







Thanks for the help Vincent

IandH Reservoir 225ML



The Pump + Phobya Top + Koolance Heatsink
I must tell this is heavy weight haha
And btw.. You see there are stubbs but will be replaced to compression fittings.







Just make a few photo's how it's looks in the case..







The window is already set but it's not a update worth..

Hope you like it

[aerial]

I like phobya pump top.

[Traxtorm]

Thanks, that you like it

[BlueAqua]

How do you like the Koolance DDC heatsink, it looks great.

Good luck with your project.

[aerial]

Btw out of curiosity how much was that whole pump set? I mean, pump + top + radiator + bp fittings, that seems like ridiculously expensive combo

[Traxtorm]

How do you like the Koolance DDC heatsink, it looks great.

Good luck with your project.

Thanks man!
The Koolance heatsink looks nice to me. It's very heavy to!
Only it's black nickel..
Maybe a new bath of nickel if that's possible

Btw out of curiosity how much was that whole pump set? I mean, pump + top + radiator + bp fittings, that seems like ridiculously expensive combo

Pheww.. pump + top + heatsink (Count to) + rads
Fittings (Some fittings I've already had from my previous build), I lost count on the fittings.. I changed my mind to get some other one's Compression 5/8 - 7/16 Matt Black & Silver Shiny.

Well, almost 300 Euro's without fittings..

[Borys]

This Laing is so pretty with this Phobya top Waiting for another update.

[h20xide]

Sub'd because of my love for TJ07s

[Traxtorm]

Little teaser!
Also new SLI bridges
Don't look at the tubing..

[Traxtorm]

Well.. nobody know what the idea was?
Here is the proof!
It's fit nice only a few more mods and it will be perfect!





First Vertical mod in the world in a TJ07?!

[zigzag]

This i have to see

[rjkoneill]

Very interesting. Nice hardware and an original tj07 idea. Looking forward to seeing the progress on this project. Good luck

[Traxtorm]

Thanks for the comments!

[Traxtorm]

Hello again,

This time a big update!
Vertical TJ07 mod is done!
Pic's with board and cards for test!









Oh yeah.. Classified number 2 is dead..
So changed to a REXIII (Thanks Father!)
About the chipset block Im thinking about which one
Also 2 Vertex 2 60GB SSD's..
And some others parts changed in time..

And big thanks for Vincent who's helping me with the casemod!

Thanks for viewing my log

[Aaronharmon]

How do you plan to conceal the cables etc coming out of the top of the case?

[Traxtorm]

Im just leaving the cables what it is now
With a roof looks the case ugly for now, maybe in the future..
If I sit in my chair I don't watch on the top of the case
Some tie-wraps for the cables are ok.
For now Im happy with the vertical mod on the case!

[vin_tech]

Nice done mate, i like to see this build soon :P

[ScottALot]

Your dad is freakin' amazing.

[Traxtorm]

Thanks!
Yeah he loved to see this build coming up from the ground
Well the case parts will be coated and finished on next week monday or tuesday.
I ordered a Bitspower waterblock for this beauty, also a Samsung F3 1TB and a led strip arrived!
oh btw... other sleeving is on it's way
Gonna replace the grey ones to black and red ones to dragonblood sleeve.

[Traxtorm]

[Traxtorm]

Well.. another update
The PSU blows up after a big leak..
Not much to talk, photo's do the answer

[Phaseshift]

nice update, this will be a good build! I'm also wondering how will you hide the cables from the top?

[Marvin54]

wooow good work

[Traxtorm]

A small upgrade



Further there will be a few changes to the loop
Oh yeah.. there's a i7 980XE in now

[ScottALot]

Hardly a teaser haha. I think I speak for all of us when I say "I know what that is"

That freak of a GPU takes as many power pins as a motherboard!