Got my little 2100+ hooked up in the prometeia.
Stable clock cpuid grab below :
Just mailed the cpu JC - should be with you by the weekend with any luck . Go take down Opp .
PiLsY.
Got my little 2100+ hooked up in the prometeia.
Stable clock cpuid grab below :
Just mailed the cpu JC - should be with you by the weekend with any luck . Go take down Opp .
PiLsY.
yeah, more details PiLsY! Stepping, date, voltage, etc. BTW, congrats!
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
Xcellent.......................
Zen2 Has brought AMD back!
Nah ive not had one of the 2003 chips.
Its a 2100+ 0250XPAW AIUHB. Nice little chip on air - 2430mhz @ default volts for 3dmark, 2500mhz into windows @ default volts. Had to knock it right back to 2333 @ default volts though for stability. It seems to really like low temps, was crying out for phase change right from the start.
Anyway, details for above...
Set to 14.5 x 209 aggressive in bios. Running 1.875v - cant get it stable any higher, max I can boot into windows @ 1.875v is 3130mhz. Setting up to 2v gives another 50mhz for a max cpuid shot but doesnt help stability at all. 2.2v wont even boot :p. Seems to really like the lower voltage scales - it feels a lot like a C1 step northy tbh.
Absolute max (unstable) OC possible. This is the highest I could boot into 2k, and even this took 3 attempts .
Crashed just after I managed to dump the screengrab - so much for loading sandra . Trimmed it a bit to make it easier on you 56kers .
PiLsY.
Ignore the whacky cpu temp btw - the 8RDA+ sensor doesnt seem to like going below -25c .
PiLsY.
Whoah. That I like!!!!!!
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
holy cow.. over a gig oc!
I come bearing beers for PiLsY.
so u can run 3.0xxx all day long? Thats nice. I hope my pelt will do wonders for the 2600+ i have. If ur 2100 did all that i just might get to 2.8 or so. If that is 100%stable and reliable than u got one amasing chip. Actually u still have one amazing chip LOL
xp2100+@2550mhz 2.03v 210fsb
Abit nf7-s v1.2
ATI R9700
2x512mb Cprsair pc3500 c2
Dual Channel!!!!!WOOT
SATA raid on 80gig maxtors
highest 3dmark 19300
3dmark2k1
Very nice, need to get me one of those proms.
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
A lot of it is definitely attributable to the cpu. The other 2100+ I got "only" managed 2890 in the prometia. This cpu was a clear 250mhz better on air, definitely one of those rare few that you find occaisionally .
PiLsY.
3DMark stable? Impressive nonetheless. GJ PiLsY!!!
Nice!!! Hey Pilsy did you run any benches at that speed would love to see those #'s
Coming Soon!!!!
I guess ill have to start buying 5 CPU's when i order, and test them all and only keep the best one
WTG Pilsy
Intel i7 3930K C2 @ 4700 mhz (100 x 47) 1.4v
EK Supremacy/EK XTC 420+280/EK DCP4.0/PrimoChill 1/2 ID 3/4 OD
Asus Rampage IV EXTREME
16 GB G.Skill RipjawsZ @ 2400 CL10-12-11-1T
Zotac GTX670
Antec Quattro 850W
Intel 330 180 GB + Micron C400 128 GB
LD Cooling PC-V7 B/R
wow, thats one nice OC!!
I WANT 3DMARK SCORES WITH THAT!!!!!
<!-- no sig present -->
Congrats dude. Absolutly amazing for $100.
Abit NF7-s
AMD XP2100+ @ 2.63Ghz
Corsair XMS3000
ATi 9500 @ 411/297
You can rely on JCViggen for the scores - with any luck this little beauty will be with him by the weekend .
Not much point my running benches seeing as this chip is sitting in a server .
PiLsY.
Wow, fantastic chip, I wonder if there are a lot of these out there. Got to love it
OPP
Congratulations Pilsy
that overclock is just insane
Rehabilitation for memory addicts
Intel Core 2 Duo E6300 ES | Gigabyte GA-965P-DS3 | Thermalright XP90C | 2 x 512MB Corsair XMS5400UL | 256MB GeCube x1800xl
that is one amazeing overclock
here i thought 0250 were bit slow
Jen
Awesome overclock man and it's nice of you to give up the golden cpu to JC so he can storm the orb.
Maximus Formula||E8400 9x445 1.42v||2x2GB GSkill PC8000||150GB Raptor||ATI 3870 840/1200||Vista64
DFI NF4 Ultra-D modded to SLI-D||Opteron 165||4x512MB Patriot XBL 2.7v||X850XT 575/594||37GB Raptor||Seagate 120gb||Audigy 2 ZS||XP Pro
A nice o/c Pilsy
AMD Seems to Have a real good chance for the top slot WTG PILSY! :smileysex :smileysex
Walrusbonzo - It came from CCL computers a few weeks back. Been mussing around with it on air for a while, but got serious with it last week .
Wolf - Id keep it myself if I thought id compete - im lacking the radeon clocks needed though so its really wasted on me. Plus its only for a server anyway.....no real need for uber mhz. And to think I only bought it cos it was cheap and unlocked - lol. I was aiming for 2ghz on air......
PiLsY.
Bookmarks