ch-5 250 2-2-2-5 1:1

[Illicit Tweakin]

how high can they go?
How much volts can they take?

at 3.34v Vmem 1.63v Vtt
250 2-2-2-5 1:1(on air right now.)

Is 3.34v safe for 24/7

[skate2snow]

I whould say 3.6V safe for 24/7 w/ resonnable cooling....

And do you have the 250FSB wall?

[Illicit Tweakin]

I don't think there is a wall. 250 is 3.5ghz i think my max on stock air.

[skate2snow]

But I've heard that sometimes they even go to 270FSB.

I just hope I dont have that wall on mine.....

[T07N]

I didn't even know it's possible for ch-5 to do 250 at 2-2-2-5...

[dobbz]

my XMS3200LL did do 240.

[IvanAndreevich]

My CH-5 CANNOT do 2-2-2 timings. Even @ 2.9V it doesn't do 200 FSB.

[lalPOOO]

Actually ivan with the newer batches of CH-5 Thats no longer true. Theres a couple screenshots of 2-2-2 at something like 230. It takes a lot of voltage though, something like 3.3 or more.

Edit, sorry didn't notice the my at the start of your sentence.

[Illicit Tweakin]

over 3.3v 1.6v for me and then they started doing something. ps holding me back now. can only go to 3.36v under load.

[stestan]

I have some noname CH5 (Ithink i have a 250fsb 1-1 wall

It runs 3D01/03/Spi/Hexus @ 249fsb 1-1 5-2-2-2 (3.3v)

But @ 250fsb 1-1 5-2-2-2 i get HD corruption

Also does 283fsb @ 5/4 >5-2-2-2 (3.3v)
---------------------------------------------------------------
245fsb 1-1 5-2-2-2 >pc3200
V's
260FSB 1-1 5-4-3-2 >pc4000
5-2-2-2 @ 15fsb less won in everytest i ran :smileysex

[Illicit Tweakin]

you need more Vtt and or Vmem and maybe Vdd.

[Geforce4ti4200]

wow I need to get some of that ch5 ram thatll own bh5! mine isnt too bad, 220fsb at 2-2-3-11 at 3 volts(cant go lower, dont want to reverse the mod) I can do up to 3.25v on my nf7-s whats the odds of me getting some corsair value for 240+ fsb at 2-2-2-11 dual channel goodness?

[QuadDamage]

wow I need to get some of that ch5 ram thatll own bh5!

it will never own BH-5. Didn't you know that BH-5 can do 290fsb+ at 2-2-2-5-9-16 and 3.5-3.7V?

[skate2snow]

stestan: The wall is that it CANT pass 250FSB not MHz. ex: Like that they cant do 250FSB at 185MHz....

But my CH5 are new and can do AT LEAST 236MHz, 2-2-2-6, 3.2V

But I dunno about the wall(CPU was maxed out). Now I have my 2.4C M0 and vid card so I can test it in 2-3 days....

[enzoR]

skate, the 250 FSB "wall" is only on intel systems

[skate2snow]

But stestan is an Intel

[enzoR]

but Illicit Tweakin isnt

[skate2snow]

I think theyres no XP CH5 wall coze they cant go up to 250FSB

[[XC]thewildblue]

Here is my Ch-5
It was bought in early 2003, think the date is 0309.

This is at 3.2v and in my dfi.

I do seem to have a 250 wall.

[dobbz]

Originally posted by QuadDamage
it will never own BH-5. Didn't you know that BH-5 can do 290fsb+ at 2-2-2-5-9-16 and 3.5-3.7V?

i dont think all BH-5 will. my Corsair has a hard time staying at 260 with 3.6v.

that stick of 3200LL CH-5 i had seemed to perform almost the same as the 3500C2 BH-5 stuff i got now. both take about 2.8/9v to get to 220 tight, 3.1v for 230 and 3.3v for 240. i didnt have any Vmods with the CH-5 though. it may have done 250 with some more volts.

[skate2snow]

Mine are 03/11. And I think the CH5's can pass the wall w/ alot of volts....

[solo]

Originally posted by Illicit Tweakin
how high can they go?
How much volts can they take?

at 3.34v Vmem 1.63v Vtt
250 2-2-2-5 1:1(on air right now.)

Is 3.34v safe for 24/7

ive seen people run 3.6-3.75 on these forums
dunno if thye use active cooling lol

[daos]

freind of mine had them running pretty nice on 3.4v, and then woke up one day....DEAD. CH-5 cannot handle voltage as well as BH-5. just remember that and be careful unless you could care less

[Illicit Tweakin]

Originally posted by enzoR
but Illicit Tweakin isnt (on intel)

I am now just haven't changed sig

[Garrett]

I've got some CH5 that did 240 11-2-2-2 @ 3.3v
I didn't try further...
I now have a locked Barton that won't "even" do 11.5x240 lol
I hit the wall with the cpu @ 11.5x229

Anyway, now running the memory 24/7 @ 3.3v no problems whatsoever