Asus P4C800-E Delux and 3,06 P4-M

Nanok · 11-01-2005, 02:18 PM

I have a 3,06 p4-m and a Asus P4C800-E Delux, can`t get it to even post
Tryed to put the 3.06 in my old soltek sl-85erv2 and postet fine 12*133
The P4C800-E Delux is working fine with a 1.8 normal P4 cpu
Even tryed to flash the 1024 beta and the 1023 but with no luck.
Anybody with a solution to me problem ?

Stocky · 11-02-2005, 04:49 AM

The newer BIOS doesn't support it for some reason. Try and re-flash with an older BIOS and I think you'll find it works. I have had the same board and processor, and it wouldn't POST with the later BIOS, when using that CPU.

Good Luck

Nanok · 11-02-2005, 06:26 AM

will give it a try !

Nanok · 11-02-2005, 07:54 AM

Nope the just flashst the 1011 bios and still no post

Stocky · 11-02-2005, 09:06 AM

Uh, odd.
I think the bios mine worked with may well have been 1016...
Give it a go, it definately worked with one of them ones and not the others.

Let us know if you get it going

Nanok · 11-02-2005, 03:58 PM

no go for the 1016 also

calcal · 11-02-2005, 04:52 PM

this board does not support this chip. I know for a fact that the abit 865/875 do though

Nanok · 11-02-2005, 07:08 PM

calcal.
will the 3,06 work with 133*23 on the abit ic7 series ?

calcal · 11-02-2005, 07:32 PM

yes the abit boards support these chips

if u wan ta good overclockingmobo and is very cheap look into the is7-e2
I know someone who is running this board with that cpu.
http://www.newegg.com/Product/Produc...82E16813127174

Stocky · 11-03-2005, 04:32 AM

Quote:

Originally Posted by calcal

this board does not support this chip. I know for a fact that the abit 865/875 do though

If it's the same chip that I have (3.06 533MHz M) then it does. I ran with mine for a bit, but it defaulted to the 12x, and I got bored with it (It is an E.S. though). If definately only worked with one of the BIOS though. I had to keep flashing back to use it, as I was playing with the new BIOS to try and see if they figured out how to utilise the 23x.

Are you sure the IC7 series works with it? I had an IC7-Max3, and I don't remember it POSTing with it, although it was a while ago so it may have done...

ScHpAnKy · 11-05-2005, 10:06 AM

haha, don't try the 3.06 P4-M and P4C800-E Deluxe combo:

http://hardforum.com/showthread.php?t=925101

Been there, done that, got my IC7 back