Asus support

[caligula]

Just admire. I've just decided I won't ever buy Asus products again, with such a brilliant support which leaves you hanging.
Needless to say that further complains to the red commies at support@asus.com.cn are still unanswered, english isn't spoken in deep China.
Pure crap.

Dear Friend :
Thank you for contacting ASUS Customer Service.
My name is Leon and I would be assisting you today.

Then that depends on you configure of the system and other componient compatibility
Good luck.



If you have any suggestions or complaints about our technical support

service, please e-mail your feedback to support@asus.com.cn. We will then

arrange for a specialist to work on your issue. Your suggestions and

feedback are most appreciated and allow us to serve you better.


Web: http://www.asus.com.tw
Download: http://download.asus.com.tw
FTP: ftp://ftp.asus.com.tw

---------- Original Message ----------
From : (hidden)
Sent : 2005-1-11 8:42:25
To : "tsd@asus.com.tw"
Subject : Re:<TSD> Motherboard P4P800-E Deluxe

Dear Leon,
Ok, it is quad pumped so it is 800, I knew that, thank you.
The question is : if I increase the frequency, MAM (or PAT) is disabled in
1:1 memory divider. Can you keep it enabled on other frequencies bigger than 200x4?



"Leon Zhao" <tsd@asus.com.tw>
11.01.2005 04:09

To: (hidden)
cc:
Subject: Re:<TSD> Motherboard P4P800-E Deluxe


Dear Friend :
Thank you for contacting ASUS Customer Service.
My name is Leon and I would be assisting you today.


Well, the FSB is 4 times of the 200 and your FSB should be 800 now and it
is ok
So ,please do not wrong about that.


If you have any suggestions or complaints about our technical support

service, please e-mail your feedback to support@asus.com.cn. We will then

arrange for a specialist to work on your issue. Your suggestions and

feedback are most appreciated and allow us to serve you better.
!

Web: http://www.asus.com.tw
Download: http://download.asus .com.tw
FTP: ftp://ftp.asus.com.tw

---------- Original Message ----------
From : (hidden)
Sent : 2005-1-11 6:14:25
To : "tsd@asus.com.tw"
Subject : <TSD> Motherboard P4P800-E Deluxe

Apply date : 1/11/2005 6:12:55 AM
[Contact Information]
*Name : (hidden)
*Email Address : (hidden)
Phone Number :
City :

[Product Information]
*Product Type : Motherboard
*Product Model : P4P800-E Deluxe
*Product S/N : (hidden)
*Date of Purchase : 2004/12/13

[Problem Description]
PAT (MAM enabled in BIOS) works only at 200 MHz FSB with 1:1 memory
divider, when increasing
the latter, PAT is being disabled. Is there any chance to get it enabled
at FSBs over 200MHz? Thank
you.

[death metal]

just do the dual bios flash =)....

[caligula]

Are you sure it works ? Do you have a description of this? Many users reported that P4P8X bootstrap does not work with this board.