my wcproject

[gert_bobo]

building my first DIY wc looking for now got everuthing ready except the waterblocks themselves still got some milling to do but tought lets already show the nice poeple here what i've got and c if i'm doing well or not
i'll give a some pic's today some more tomorrow
still got lot's of work on the case (color, windows and stuff)
the blocks so far dunno witch one i'm gonna use gonna test them both

Greetz Gert AkA BOBO

[a5h]

very ghetto, i like
but the case looks more like a freezer
nice job on the blocks tho.

[gert_bobo]

i know that the case looks like a freezer friends told me that already it's huge and still needs to be painted and modded but ty for the first and positive comments
Greetz Gert AkA BOBO
ps: where is the getto part if i may ask

[Jabo]

Nice industrial look, I personally would rather emphasise it than mod it out, good idustrial look is extremely hard to see around these days ....
YOur blocks are absolutley amazng, especially the one with lots of windings (tighter spiral with narrower channel) promises a LOT in performance department !

[gert_bobo]

emphase what u mean by that my english isn't very good u c
it's gonna hav a window @ each site it's school project that i chose to do so the grand jury must be able to see things i'm looking for my dad's digicam so i can take/post some more picture's also gotten the schematics for de HD-vumeter let's hope that that is going to work
Greetz Gert AkA BOBO

[a5h]

ya u betta mod the hell outta it!
and .....we want pics!
its just ghetto cuz it looks so old
what the hell is in it hehe.
but one rule in ghetto moddin ...use what u have improvise.

[gert_bobo]

it's old it's an old server case with my new system in it
asus a7n8x deluxe
amd xp2800+ @ 2400Mhz (for the moment)
2*256 Mb GeIL PC3500 PLATINUM (200 @ 2-2-2-11)
2*80 Gb WD
Gf3Ti200 @ 200/500
more pic's made on request
u see here the backpanel (4blowholes) and frontpanel + radiator + pump (eheim 1048) + some tubing taken without flash
one with flash
close up of the pump+ tubing and radiator
the case again but in actual state @ the moment
i'm probably gonna build a plexi res @ the right where it's open @ the moment and if i find the money or get a lcd sponsord then that's probably going under the res that's all for now
Greetz Gert AkA BOBO
*edit*
wrong links to the images

[Marvin]

i think you picked a condenser. Try a serach for a Heatercore.

[AngryAlpaca]

Yeah, why that radiator? (If it was free, or at least really cheap, we forgive you) And for the blocks, I should think that the less restrictive one would be the most effective.

[gkiing]

I've seen radiators that look like that.. I doubt its a condensor. The kit from asetek uses a radiator like that.

[AngryAlpaca]

The Asetek kit uses a black ice pro. It's heater core style, but the one he is using isn't. Those kind of radiators are meant to get the liquid as cold as possible, not to dissipate heat, like a heater core.

[gert_bobo]

i got it for free from my teacher and it should cool enough
Greetz Gert AkA BOBO

[AngryAlpaca]

If it's free, it's good enough!

[gert_bobo]

I know hopefully I'll get one block finished tomorrow

[gert_bobo]

it's finished the first block and up running
pic's @ http://users.pandora.be/BOBOsplace/pc_stuff
don't mind the mess
temps passif r 36-37°C idle (@3200+ 1.75Vcore)
stress still needs to be tested
Greetz Gert AkA BOBO
P.S.: more pic's of the modding will come this week

[Epsilon]

tip: zet je camera op een korte sluitertijd

[gert_bobo]

kweet neit of dat gaat bij onze zal er eens achter zoeken ok
Greetz Gert AkA BOBO

[gert_bobo]

ok stressed temp = 44-45°C this is passifly chilled
Greetz Gert AkA BOBO