problem finding angle rotary compression fittings

yiannit · 11-02-2009, 06:25 PM

i'm looking for 2 angle compression rotary fittings for my radiator from bitspower but all i can find is these

http://www.performance-pcs.com/catal...ducts_id=24762

http://www.performance-pcs.com/catal...ducts_id=24764

im using 3/8" ID 5/8 OD tubing

i could buy these http://www.performance-pcs.com/catal...ducts_id=24753 and add compression fittings but i would end up paying more

am i missing something here?

Aedubber · 11-02-2009, 08:22 PM

Gary @ sidewinders has lots of compression fittings etc

yiannit · 11-02-2009, 08:24 PM

i looked there but they didnt have the angle rotary compression ones, maybe ill have to call

Waterlogged · 11-02-2009, 08:36 PM

I don't think BP makes any 3/8" comp style fittings other than the straight variety. P-PC has probably the largest selection of the BP line and if they don't have it, it's likely no one does. I've seen this come up before and the last time it did (about a couple weeks ago, IIRC), I spent a bit of time a poked through the sites BP does have LC gear on and couldn't find anything like your asking for.

Spawn-Inc · 11-02-2009, 09:29 PM

what about this?

http://www.performance-pcs.com/catal...ducts_id=25645

Utnorris · 11-02-2009, 11:01 PM

I think he wants a compression fitting built in.

millertime359 · 11-03-2009, 05:31 AM

Quote:

Originally Posted by Aedubber

Gary @ sidewinders has lots of compression fittings etc

Sidewinders really on carries angle fittings and comp fittings separate. They don't stock the angle comp fitting the OP is looking for.

+1 on waterlogged. If PPC doesn't have it, there is a 99% chance no one does.

yiannit · 11-03-2009, 06:44 AM

k i guess i'll just by them separate thank you for the help

Setix · 11-03-2009, 09:29 AM

I've got 2 brand new BP 45 3/8 I.D. 5/8 O.D. Dual Rotary Compression fittings, if you want them send me a P.M. and we can set something up...

..I got them from PPCs but I ordered the wrong size...

Edit: they are 45 degree...didnt know you needed 90's until now....

Spawn-Inc · 11-03-2009, 12:01 PM

they have some here then.

http://www.performance-pcs.com/catal...46_393_611_625

yiannit · 11-03-2009, 03:32 PM

i've seen all those i was just trying to get angle rotary with compression fittings instead ill buy the angle ones and compression fitting separate

these http://www.sidewindercomputers.com/big1sishro90.html with http://www.sidewindercomputers.com/bi3cofifor5o.html

triggs75 · 11-03-2009, 04:23 PM

Quote:

Originally Posted by yiannit

i've seen all those i was just trying to get angle rotary with compression fittings instead ill buy the angle ones and compression fitting separate

these http://www.sidewindercomputers.com/big1sishro90.html with http://www.sidewindercomputers.com/bi3cofifor5o.html

It will be interesting to see those two together as the compression fitting will be almost the same height as the adaptor and might not be able to tighten the fitting all the way down depending on what your putting it on.

Hkxyz · 11-03-2009, 05:07 PM

Quote:

Originally Posted by triggs75

It will be interesting to see those two together as the compression fitting will be almost the same height as the adaptor and might not be able to tighten the fitting all the way down depending on what your putting it on.

I am using the same 90 with a 1/2 3/4 and it fits so those should be fine. They are coming out of a swiftech Rad. It looks to have about a 1/4 inch of clearance before it would hit.

yiannit · 11-03-2009, 07:36 PM

I will most likely be putting it on a HW Labs SR-1 480