for first stage use the danfoss tes2 works with 507/404 i would stay away from 410a unless you have very good condensing on the first stage
there is only one txv that would be any good but its for r23(danfoss teb2) on second stage that you can buy in a shop
to make one work with 1150 you will need to change the gas in the txv bulb to 1150
i get my cpevs from piotres
http://www.xtremesystems.org/FORUMS/member.php?u=15509
.
__________________
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Last edited by bazx; 09-25-2009 at 10:22 AM.
|
[Help] TXV & CPEV sugestion
.
Linear Mode
