P5K + QX6700 + Vapo + 8800Ultra

[FUGGER]

Intel QX6700 2.66Ghz ES
Asus p5K deluxe
Corsair PC10000 Dominators
Enermax Galaxy 1Kw
Asetek Vapochill modded by Chilly1
Nvidia 8800 Ultra Max clock with stock cooling 733/1222
Unmodded shaders
Single card runs on P35 platform
Vapochill R507 modded and tuned for quad core

Max quad FSB 480Mhz
http://valid.x86-secret.com/show_oc?id=199946

Max duo FSB 551Mhz
http://valid.x86-secret.com/show_oc.php?id=199837

Futuremark 2001


Max clocked, 73/1222


Futuremark 2003


Futuremark 2005


Picked up the clocks more


Futuremark 2006, 16K is pretty good for single card stock sink.


SLI, Bandwidth and Pi stuff coming

[VictorWang]

very nice 01 results

hope to see u at computex

[rob[GL]]

Good work as always!

[FUGGER]

I have two cards and testing both, as you can see there is a difference in the two as one is much better than the other.

Now I just need to tune a bit more and pass Denny.

[G H Z]

Nice benching setup

[Pedro Rocha]

Nice numbers as always Charles

How much VCore are you using on the QX6700? and how the Vapo holds the heat?

My QX6700 do 10 seconds / Rend 4 Cores 2088 CB on Cinebench with P5K dlx on air cooling (tuniq)



Try to run Cinebench wth yours in Vapo please

I really love these P5K and the CPU Voltage Damper (really efective), also the performance per clock seems to be near the 975x with much more FSB to go

[Pedro Rocha]

Originally Posted by FUGGER

I have two cards and testing both, as you can see there is a difference in the two as one is much better than the other.

Now I just need to tune a bit more and pass Denny.

Use LOD's!!!

Just try 4.8 for Nature and you will jump 30fps at least

[FUGGER]

I will load up cinebench, I should be able to do it around 4.2Ghz @ 1.6v

[xs64]

Originally Posted by FUGGER

SLI, Bandwidth and Pi stuff coming

FUGGER, does SLI with G80 works in P35, sir?

[ZoLKoRn]

Very nice score ! , How you disable core ?

Thank.

[FUGGER]

No, I will switch back to 680i for SLI

[WRC]

excellent results!

[boblemagnifique]

Originally Posted by Pedro Rocha

Nice numbers as always Charles

How much VCore are you using on the QX6700? and how the Vapo holds the heat?

My QX6700 do 10 seconds / Rend 4 Cores 2088 CB on Cinebench with P5K dlx on air cooling (tuniq)



Try to run Cinebench wth yours in Vapo please

I really love these P5K and the CPU Voltage Damper (really efective), also the performance per clock seems to be near the 975x with much more FSB to go

Great Score Fugger

Impressive Pedro

What freq/timmings ram ? please

[FUGGER]

Cinebench at 4.1Ghz and 4.2Ghz

[Nordling]

stock cooling Unmodded shaders

Why not mod's?

[FUGGER]

I will, just stating that they are not modded for these runs.

From looking at others around the net, the cores hit 700Mhz on average with stock heatsink and good air cooling to the case or bench.

I cannot match the 488FSB in with all four cores enabled, 480 and widows freezes but it seems I can bench all the way up to 479 on this board, I need to jump back onto the P5K3 again to see what it maxes at.

[bmg]

Originally Posted by FUGGER

I will, just stating that they are not modded for these runs.

From looking at others around the net, the cores hit 700Mhz on average with stock heatsink and good air cooling to the case or bench.

I cannot match the 488FSB in with all four cores enabled, 480 and widows freezes but it seems I can bench all the way up to 479 on this board, I need to jump back onto the P5K3 again to see what it maxes at.

My Ultra's pretty much the same as the weaker of your two, 702 benches fine, but 720 is just a bit much until I voltmod the card.

I'm curious how you disable cores in the P5K Deluxe bios? There must be a secret setting I'm missing

[k|ngp|n]

Real nice FSB's Charles on the P5k
Did you mod those shaders or waiting for SLI?? Are you going to waterchill the cards?

[Movieman]

Originally Posted by FUGGER

I will load up cinebench, I should be able to do it around 4.2Ghz @ 1.6v

ahh, a place where I can compete!
See if you can get down to 8 seconds in Cinebench!
Nice rig there Charles!

[kiwi]

Nice gaming rig

Originally Posted by bmg

I'm curious how you disable cores in the P5K Deluxe bios? There must be a secret setting I'm missing

Only through msconfig Not many MBs have it in bios

[FUGGER]

I found out that firing up over 500FSB will lose two cores. I have no control but I known and expect it to happen on this board.

Vince, wanted to get my initial benches done.

Kiwi, yep this is my gaming rig. I need to fire up on the cascade for better placement on the ORB.

[perkam]

I preferred it when Fugger was going purple X(

But great stuff nonetheless

Perkam

[FUGGER]

Some SLI results on 680i, this board is hurting. Switched back to x6800 and cannot get a high stable bus.

A CPUID with decent memory speed in dual channel
http://valid.x86-secret.com/show_oc.php?id=202056

I ran a 2K1 and picked it up a bit for 2K3 and 2K5
http://service.futuremark.com/compare?2k1=9206064

http://service.futuremark.com/compare?2k3=5378511


http://service.futuremark.com/compare?3dm05=3081093


I ran 2K6 a few days ago on the quad
http://service.futuremark.com/compare?3dm06=1997772

[Kunaak]

Fugger -

High FSB's arent impossible with Quad Core and 680i.
one little mod, and alittle time to tune that mod, and you can really change how that board works when using quad core.

heres some examples of the stuff I been doing with it.

8 x 450 easily 3dmark, and game stable, and been running like this for about 4-5 days now.









all the details, and more screen shots can be found in my post about it, in the Vmod area.

http://www.xtremesystems.org/forums/...d.php?t=145524

give the mod a shot, its easy, and only takes a 1K VR, and about a hour or so, of tweaking to really get down.
it's not a quick, instant results mod, as you really do have to take the time to tune the voltage to near perfect voltage range, but as you can see, the results are definatly worth the effort.

[NickS]

Not bad. 4.0 on a vapo is pretty low for 05, though.