My wonderful workspace, normally i work at my bench in the basement but I decided to use the kitchen this time
cleaned and reapplied TIM on board, mounted cpu block, installed memory
Radiator mounted between two fans, why?, because I could, Lol. One is an antec tricool (80cfm) and the other is one of my silenx's (~85cfm)
together the produce GREAT airflow.
my tubes from the last build, they are narsty :\
mobo installed everything is going good, my trusty phillips screwdriver seen here
blocks and pump installed, everything wired up and VERY neat
read to fill, i guess, more wiring finished
ready to fill again, standing up for the first time
bleeding in progress, about half done, major bubbles out
finished but dooing leak testing, passing so far
ITS DONE! ready to start up
a closer look and that wonderful blue electric tape!, i really loke the way it has turned out
so thats it guys!!, i am going to be making a new signature soon in honor of the new build, for now its stays the same.
For th future i will be placing my PA120.3 in the BOTTOM of the case (unlike most) and will be adding a 437w TEC setup most likely (come summer )
__________________ Account no longer active, see contact info to get in touch
__________________
e6400
gigabyte ds2r
7600gs 256mb
crappy ram you don't want to know about
crappy hard drive you don't want to know about
crappy case you don't want to blah blah blah
Homemade watercooling mounted with zipties for the most part
ty serial, i hope i haven't caused too much bad blood btween us lol, I like to argue
Its okay, I like to argue too. Why do you think I have all these posts and spend this much time here?
__________________
e6400
gigabyte ds2r
7600gs 256mb
crappy ram you don't want to know about
crappy hard drive you don't want to know about
crappy case you don't want to blah blah blah
Homemade watercooling mounted with zipties for the most part
Its okay, I like to argue too. Why do you think I have all these posts and spend this much time here?
Auto resetting post count to zero...10...9...8...7...
Nice build SNiiPE_DoGG. In the middle of doing a WC G70 myself..silver..
and with just one more cpu ..
__________________ The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Quote:
Originally Posted by Frisch
If you have lost faith in humanity, then hold a newborn in your hands.
Auto resetting post count to zero...10...9...8...7...
Nice build SNiiPE_DoGG. In the middle of doing a WC G70 myself..silver..
and with just one more cpu ..
Did you really think I cared about my post count? The only reason I actually noticed it climbing was because out of the corner of my eye I can sorta see the 1000s digit Set it to whatever number you like
I actually delete posts if I use them to bump threads, or make errors...unlike the majority of people.
__________________
e6400
gigabyte ds2r
7600gs 256mb
crappy ram you don't want to know about
crappy hard drive you don't want to know about
crappy case you don't want to blah blah blah
Homemade watercooling mounted with zipties for the most part
Did you really think I cared about my post count? The only reason I actually noticed it climbing was because out of the corner of my eye I can sorta see the 1000s digit Set it to whatever number you like
I actually delete posts if I use them to bump threads, or make errors...unlike the majority of people.
Just teasing..a mellow 12:40am on a sunday morning..
( I had my own reset to zero at a little over 3000 posts)
__________________ The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Quote:
Originally Posted by Frisch
If you have lost faith in humanity, then hold a newborn in your hands.
I could be an old man by then!
Oh, wait, I am..SEE? I told you your taking too long!
__________________ The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Quote:
Originally Posted by Frisch
If you have lost faith in humanity, then hold a newborn in your hands.
Just one comment - i used to have my Raptors mounted that way and they used to vibrate really bad. Do you notice yours?
I have heard you can suspend them in the 5/1/4 drive bays with elasticated cord (like the stuff at the end of some coat sleeves). Its supposed to cut out all noise.
only noise coming from raptors are when they're seeking prey, i mean data...
some rubber gromets to thread those screws would be nice for any enthusiast case makers, like those found in some Lian Li's cases - Ex34 fan/drive cages.
-the raptors are kinda noisy but not too too bad, i will get something for them soon. I wear headphones every time i sit at the comp so it doesn't bother me.
- the coolant is mostly distilled water, but i did not have the additives for pure distilled so i made due. this is only a 2-3 month solution anyway so it shouldn't matter (getting 120.3)
-i dont want to waste my $ on another pa120.1
pa120.1 = 94$ ==> .783 $ per mm (120mm)
pa120.3 = 135$ ==> .375 $ per mm (360mm)
__________________ Account no longer active, see contact info to get in touch
__________________ XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
-the raptors are kinda noisy but not too too bad, i will get something for them soon. I wear headphones every time i sit at the comp so it doesn't bother me.
- the coolant is mostly distilled water, but i did not have the additives for pure distilled so i made due. this is only a 2-3 month solution anyway so it shouldn't matter (getting 120.3)
-i dont want to waste my $ on another pa120.1
pa120.1 = 94$ ==> .783 $ per mm (120mm)
pa120.3 = 135$ ==> .375 $ per mm (360mm)
Oh god with that post now IanY is gonna rattle off a bunch of crap about Thermochills, how people pick on him because he's rich and how more radiators pwns.
__________________
e6400
gigabyte ds2r
7600gs 256mb
crappy ram you don't want to know about
crappy hard drive you don't want to know about
crappy case you don't want to blah blah blah
Homemade watercooling mounted with zipties for the most part
My move into the G70, Build Log (56k warning)
)
mounted with zipties for the most part 
![[XC] leviathan18's Avatar](image.php?u=14879&dateline=1188568252)
)
Linear Mode
