Celeron D326

[Snowman89]

I got my new toys today, Celeron D326, biostar Tforce 965 PT, twinmos pc4200.
Im still using stock cooler!
I hit a max at 3100mhz with 1.4125v, but im a totally newb on it so what voltages and settings should should i adjust to go further and what voltage is max?

[Omastar]

I wouldn't go above 1.5v on the stock cooler because temps will likely skyrocket. Make sure to keep your RAM cooled with a 80-92mm fan, too, and be sure to disable all crap like C1E/EIST/Virtualization Technology in BIOS.

[Nerfy]

3.1 Ghz at 1.4125?

Most people get 3.8 ghz + on stock voltage with a 326.

[Kitaps]

What temps and thermal grease do you have? Maybe you should change thermal grease if you are using Intel original themal pad.

[Snowman89]

Originally Posted by Omastar

I wouldn't go above 1.5v on the stock cooler because temps will likely skyrocket. Make sure to keep your RAM cooled with a 80-92mm fan, too, and be sure to disable all crap like C1E/EIST/Virtualization Technology in BIOS.

C1E/EIST? Where in bios can i find it? Is there a thing like htt multi on a intel?
How should i set memory settings so they go as slow as possible?

[monza1412]

same chip as yours:
http://img293.imageshack.us/img293/7822/dibujo2nw7.png

1.6v. just for benches, but does 3.8 with stock vcore.
You should get a better cooler.

[Snowman89]

Originally Posted by monza1412

same chip as yours:
http://img293.imageshack.us/img293/7822/dibujo2nw7.png

1.6v. just for benches, but does 3.8 with stock vcore.
You should get a better cooler.

what are you using for cooling?


edit: now it refuses to post...
When i try it with a pci graphic card it ust starts and reboots but i can hear the fans spinning up and down and the harddrive working, but with a pci-e card nothing happends the fans stay at a rpm and then nothing more, all leds are unlit

[Snowman89]

its still not working...