Sometimes ago, Martin_Ez, a member of polish forum "purepc" ask me about chiller. First He had an idea to buy Alphacool 150 chiller, but finally He decided that He want a custom chiller from me . He want to have 10-20*c liquid temp with AMD AM2 X2 4600+ oced and 7900GTX, so rather nothing really cold , but nice case was important need for Him .
Specs :
compressor: Danfoss NL7CLX
heat exchanger: cooper pipe 35mm/ 22 cm long + around 3m, 8mm pipe as evap
XV: captube 0.8 mm, 210 cm
condensor: custom made 195 x 167 x 60 mm , alu-cu, 0.395 kW, cooled with Sunon 120/38 mm (230V powered)
refrigerant : R507
case: metal case 49 x 21 x 23 cm, black, glossy coat
others: elctronic controller Everycontrol (from -40*C to +99*C), Sunon 230V fan 120/38mm on the back of case, SLHX+SLA in one
Hoses terminals are one part with case (after some work on putty) .
Premier layer.
Black acrylic coat
HX from inside .
I've put some R507 and I saw this ...controller's probe is laying (it's on the end of HX pipe), gah
I've add some more R507 to finetune the unit .
I must use some normal tape, because armaflex tape was too thick in that place .
I don't have any WC blocks, so I've used 0.5l pure 20*c water + 1.0l 100*C water, and that mix gave me 53*C liquid + I've put Maxi-Jet 1000 pump into loop
After 15 mins from turning on chiller, I got 5*C .
I've turned off chiller in that time, because I heard sound of crushed ice into HX (only pure water) .
Nice unit mate, schmicko paint job too . Can you get a decent flow rate through your HX?, it looks like the pipes have been squashed excessively when creating the coil, at least it'll help achieve a great heat trasfer to the water , not good for flow rate but
Nice unit mate, schmicko paint job too . Can you get a decent flow rate through your HX?, it looks like the pipes have been squashed excessively when creating the coil, at least it'll help achieve a great heat trasfer to the water , not good for flow rate but
I know, pipes are squashed a bit, but it's not a problem ...pulldown is quite fast, chiller work OK .
@Blaster: I know, but owner already has nice inline Laing pump mounted into PC case, and don't want to change it .
. He want to have 10-20*c liquid temp with AMD AM2 X2 4600+ oced and 7900GTX, so rather nothing really cold 
, but nice case was important need for Him 
.
.
. Can you get a decent flow rate through your HX?, it looks like the pipes have been squashed excessively when creating the coil, at least it'll help achieve a great heat trasfer to the water 
![Athens[2004]'s Avatar](image.php?u=13280&dateline=1240313423)
Linear Mode
