A-Data DDR566

[I_Am_ToO_SeXy]

in stock here in italy

is this ram good???

noone have tried it???

[Mariachi]

I won't replace that 3700EB

[LorD_Kvadd]

Wow didn't know there was Vitesta 566...
Had a pair of Adata vitesta ddr500 before. But they really sucked.

[I_Am_ToO_SeXy]

i saw a-data DDR500 @DDR600

i think these babies can go around DDR650 with nice overvolt

[LorD_Kvadd]

As far as I'm concerned the adata doesn't like voltage at all. Mine didn't care if i put 2,9V on them they still didn't go any higher

[I_Am_ToO_SeXy]

y, OCZ EB don't like overvolt too

3 or 3,5 volts r the same :\

[LorD_Kvadd]

aren't those supposed to love voltage? =/
well I sold my vitesta and got myself a pair of Corsair BH-5. And I was in heaven until i remembered that my motherboard only could achive 2,9Vdimm without modding it.

[I_Am_ToO_SeXy]

i want BH5 too T_T

can't find here in italy T_T

i love mushkin purple heatsink lol... so SeXy...

[quicksilverXP]

At my workplace, A-Data actually sent our company their DDR-566s. The chips read as follows.

Samsung 425
K4H560838F-TCCDs

So these are indeed the F die TCCDs. Although the SPD gives 6-3-3-3, I've tested them at 5-2-2-2 up to 225 FSb at 2.8v on a Soyo Dragon 87P. My lowest timings were 2.5-4-4-7 (which for Pentium 4's is alright... better than 3-4-4-8) at 280 FSB in dual channel. The change from 2.8v to 2.9v yielded no increase in OC, so I'm guessing it doesn't like voltage. However, I've yet to volt mod thos board (still waiting on my work to purchase a P4C800).
On an A8V with an FX-53, I was also able to get that board up to 235 FSB at 3-2-2-6 at the stock multipler of 12. Haven't done further testing but I'll see. I'll also try testing it on an AG8 with a 3.0E.

[Lithan]

" I've tested them at 5-2-2-2 up to 225 FSb at 2.8v "


Wow.

[DjTonic]

Check out this review Click. Article is written in german language, but you can also see the pics .

These seems to be some nice modules i though

[thephenom]

Originally posted by quicksilverXP
At my workplace, A-Data actually sent our company their DDR-566s. The chips read as follows.

Samsung 425
K4H560838F-TCCDs

So these are indeed the F die TCCDs. Although the SPD gives 6-3-3-3, I've tested them at 5-2-2-2 up to 225 FSb at 2.8v on a Soyo Dragon 87P. My lowest timings were 2.5-4-4-7 (which for Pentium 4's is alright... better than 3-4-4-8) at 280 FSB in dual channel. The change from 2.8v to 2.9v yielded no increase in OC, so I'm guessing it doesn't like voltage. However, I've yet to volt mod thos board (still waiting on my work to purchase a P4C800).
On an A8V with an FX-53, I was also able to get that board up to 235 FSB at 3-2-2-6 at the stock multipler of 12. Haven't done further testing but I'll see. I'll also try testing it on an AG8 with a 3.0E.

That definitely sounds good for overclocking.

[johnnyliu3377]

A-data DDR566 (Samsung TCCD) is good in overclock!!

D5 can working 8-4-4-3 (1:1) to pull high Mhz.....& Winbond BH-5 could set RAM clock in the best 5-2-2-2......

but,TCCD even to get up!!

DDR566 V-dimm just only 2.5v


by RAM clock in the best 5-2-2-2 in DDR446 V-dimm 3.23V




johnnyliu3377

[althes]

very nice

[blinky]

i wanna get my hands on some A-Data DDR600, 330mhz+ tastes yummy!

[dippyskoodlez]

Its not so much the memory cant do it, but our mobos and CPU's are having trouble.. LOL




I love my Adata!

[Geforce4ti4200]

how high can that do with ras-cas at 3? I would so buy it if it can pull 275fsb at ras-cas 3! this is as good as 250fsb ras-cas 2

[saaya]

Originally posted by Mariachi
I won't replace that 3700EB

of course it will :P
ocz stopped eb production weeks ago!

and about the samsung tccd memory... thats nice for people who are scared of high vdimm or of doing vdimm mods, but hynix still outperforms it. the new hynix memory even runs with 2.5-3-3 up to ddr500+

[I_Am_ToO_SeXy]

What???

OCZ Stopped doing EB??? o_O

OMFG

[Geforce4ti4200]

http://www.xtremesystems.org/forums/...threadid=39580

[Mariachi]

How can I recognize a TCCD VITESTA?
Because some of the versions are simple Hynix, is that the chip you're talking about saaya ?

[johnnyliu3377]

Originally posted by Mariachi
How can I recognize a TCCD VITESTA?
Because some of the versions are simple Hynix, is that the chip you're talking about saaya ?

See A-data DDR566 ,just do it!!

[qk4722]

OMG ! My A-DATA TCCD PC4600 SO Crazy !

2.8v DDR630 !


2.8v DDR600 run 3d01 !:thumbsup:

[johnnyliu3377]

512MBx2 DDR630

[I_Am_ToO_SeXy]

Very nice, how about tight timings??

can they run 200 Mhz 2-2-2-5 like the rest of TCCD-equipped memory??