Page 1 of 3 123 LastLast
Results 1 to 25 of 65

Thread: Xtreme Grand Prix racetrack 3 discussion

  1. #1
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147

    Xtreme Grand Prix racetrack 3 discussion

    i noticed quite a few people were interested in running pcmark or another more system performence related test, so here you go
    with 2k1 beeing 5 years old now it has become a pretty good system performence bench and isnt nearly as vpu limited as most other videocard benches

    if theres a 3d bench that likes a fast cpu and fast and low latency memory its 2k1, so tweak your memory and max out your cpus, this is the bench that will most benefit from a tweaked system and not only videocard

    oh and btw, i made a collage for the grand prix
    i wanted to have this done when the competition launched but was too busy... :/

    Last edited by saaya; 07-25-2005 at 05:26 PM.

  2. #2
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090
    Here comes the dothan pwnage...


    If you have a cooling question or concern feel free to contact me.

  3. #3
    Registered User
    Join Date
    Jun 2005
    Posts
    45
    ahhh i didn't know it was anything goes in am3! i get an extra 4k with the 80.40 drivers! o well...
    amd opteron 148
    1gb mushkin registered ecc pc3200 2-3-2
    foxconn nfpik8aa nforce pro motherboard
    evga 7800gtx
    1 74Gb raptor (os)
    1 80Gb maxtor 7200rpm
    1 seagate 120Gb 7200rpm
    sunbeam transformer full tower case
    1/2" id w/c tdx waterblock, single heater core
    hydor L35

  4. #4
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    Quote Originally Posted by SillySider03
    Ok, I'll be the first to ask...FM approved drivers? Or are we treating this like AM3, where anything goes?

    Also, is there going to be some kind of results thread? Something to compare scores without having to go through all the results in that weeks thread? Just wonderin'...Good Luck to everyone!
    fm approved drivers only please

    and yeah imma work out a ranking for each week and an overall ranking, if im too busy i will ask somebody else to help me or do it for me

  5. #5
    beefin' it up!
    Join Date
    Dec 2004
    Location
    WPI
    Posts
    2,457
    you don't have any motherboard boxes in the collage! those are the most common cases I've seen on these forums

  6. #6
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    Quote Originally Posted by mr_gibs
    ahhh i didn't know it was anything goes in am3! i get an extra 4k with the 80.40 drivers! o well...
    sorry, i said so in the week2 discussion thread and thougt everybody read it. :/

    Quote Originally Posted by Bloody_Sorcerer
    you don't have any motherboard boxes in the collage! those are the most common cases I've seen on these forums
    hahaha yeah, i thougt about using one as well, and a prommie case etc, but those are really hard to work with, hard to cut them out of a pic and paste em into the collage... i planned 30mins for it and ended up spending over an hour on it

    if we are going to have another grand prix in 2006 im gonna ask lalpooo or malves who are photoshop masters



    i made another one
    Last edited by saaya; 07-25-2005 at 07:12 PM.

  7. #7
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    Imladris
    Posts
    967
    Saaya, that picture is mint.....
    The little air system that could.


  8. #8
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    512
    LOL nice one
    Opteron 170 @ 3.0Ghz on air, Opteron 144 @ 3.1Ghz on air

  9. #9
    My own little world
    Join Date
    May 2005
    Location
    The Septic Isle
    Posts
    699
    HEre ya go saaya, a quick photochop for ya.



    Only mobo box i could find quickly, at near the right angle

    Now, back to benching...
    Quote Originally Posted by JF-AMD View Post
    Dual proc client systems are like sex in high school. Everyone talks about it but nobody is really doing it.

  10. #10
    Xtreme 3DTeam Member
    Join Date
    Dec 2004
    Location
    UK
    Posts
    865
    Quote Originally Posted by saaya
    fm approved drivers only please
    as i've said many times and no ones really answered, i cant use approved drivers and open the 8 pipes, as soon as its softmodded futuremark detects this somehow and they become not FM approved, if this is a big problem i'll pull out but if i do then theres gonna be one less in the GP and theres isnt exactly loads competing in the first place

    Opty 144 0546FPMW @ 2.8ghz
    MSI K8N Neo 2
    2 x 512mb OCZ Platinum Rev. 2 TCCD
    ATI X800 Pro @ 570/1200
    Plus some other metal fings...
    Will do me till Conroe
    Heat

  11. #11
    Xtreme 3DTeam Member
    Join Date
    Jan 2004
    Location
    Dresden
    Posts
    1,163
    Quote Originally Posted by saaya
    i made another one
    hilarious

  12. #12
    My own little world
    Join Date
    May 2005
    Location
    The Septic Isle
    Posts
    699
    Weird, 3Dmark01 won't let me publish my project, giving this reason:-
    "This project can not be published due to detected CPU speed variation."

    Any Ideas? I'm running the same FM Approved Drivers i ran for 03.

    suggestions appreciated, as I know I can better this score, just a first untweaked run to set me a baseline for myself
    Quote Originally Posted by JF-AMD View Post
    Dual proc client systems are like sex in high school. Everyone talks about it but nobody is really doing it.

  13. #13
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    Imladris
    Posts
    967
    Quote Originally Posted by InSanCen
    Weird, 3Dmark01 won't let me publish my project, giving this reason:-
    "This project can not be published due to detected CPU speed variation."

    Any Ideas? I'm running the same FM Approved Drivers i ran for 03.

    suggestions appreciated, as I know I can better this score, just a first untweaked run to set me a baseline for myself
    I've only seen that once with an old version. I'm guessing you have the most up to date version? It happened when I adjusted my clock speed using clockgen instead of doing it in bios.
    The little air system that could.


  14. #14
    My own little world
    Join Date
    May 2005
    Location
    The Septic Isle
    Posts
    699
    YEah, it the 01SE version with the patch applied.

    NEver had a problem before, so kinda stumped.

    Ah well, mabye it's a Format & Reinstall calling. Should bump my marks up anyway (All runs on all tracks so far are on ym everyday system, little with very little in the way of Tweaks)
    Quote Originally Posted by JF-AMD View Post
    Dual proc client systems are like sex in high school. Everyone talks about it but nobody is really doing it.

  15. #15
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    Quote Originally Posted by saaya
    sorry, i said so in the week2 discussion thread and thougt everybody read it. :/


    hahaha yeah, i thougt about using one as well, and a prommie case etc, but those are really hard to work with, hard to cut them out of a pic and paste em into the collage... i planned 30mins for it and ended up spending over an hour on it

    if we are going to have another grand prix in 2006 im gonna ask lalpooo or malves who are photoshop masters



    i made another one
    classic
    Whats that thing after car and before all the people getting roasted at the castle supposed to be?
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  16. #16
    Moral Police
    Join Date
    Nov 2004
    Location
    Belgium
    Posts
    2,099
    whtas the best system(os) to run 2001 on? + tweaks?

  17. #17
    Xtreme 3DTeam Member
    Join Date
    Dec 2004
    Location
    UK
    Posts
    865
    Quote Originally Posted by Entity_Razer
    whtas the best system(os) to run 2001 on? + tweaks?
    like i'm gonna tell you but isnt it well known already?

    Opty 144 0546FPMW @ 2.8ghz
    MSI K8N Neo 2
    2 x 512mb OCZ Platinum Rev. 2 TCCD
    ATI X800 Pro @ 570/1200
    Plus some other metal fings...
    Will do me till Conroe
    Heat

  18. #18
    Moral Police
    Join Date
    Nov 2004
    Location
    Belgium
    Posts
    2,099
    I think I know but I'm not sure

    I know of one tweak that just HAS to be done, just don't know if it works on AMD's also?

  19. #19
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    NJ
    Posts
    984
    I need a replacement graphics card. As long as I get another 7800gtx it shouldn't matter which brand right?



    2. What if a part of my system dies?
    If your CPU/Mainboard/Videocard/Memory dies you can only replace it with the same piece of hardware or you get disqualified.
    you could use hardware that performs better in the early benchmarks at first and then switch hardware that performs better in later benchmarks to reach a higher overall score.
    Any other parts of Hardware like the PSU, the HDDs etc can get replaced with other brands and models wich isnt a problem since it doesnt have a direct impact on the systems performence.


  20. #20
    Xtreme Member
    Join Date
    Jun 2005
    Posts
    118
    I would think you could put in whatever 7800gtx you want since they are all the same right now except for the bios and art work.

    Gryph

  21. #21
    Xtreme Member
    Join Date
    Jun 2005
    Posts
    118
    Quote Originally Posted by harleybro
    I need a replacement graphics card. As long as I get another 7800gtx it shouldn't matter which brand right?
    Ok Harleybro what did ya do to your card? Did it fry on volts? I am just wondering cause I am trying not to kill my card just yet.

    Gryph

  22. #22
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    NJ
    Posts
    984
    Booted up and burned a chip. Got a good pic of which chip but not a good pic of the burn. The burn pic is all fuzzy lol. The chip is to the left of the bottom ram sink w/ 8 legs.
    http://img83.imageshack.us/my.php?im...ture3166qy.jpg


  23. #23
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    Imladris
    Posts
    967
    this hobbie can get real expensive....... sorry to hear that bro.
    The little air system that could.


  24. #24
    Xtreme 3DTeam Member
    Join Date
    Dec 2004
    Location
    UK
    Posts
    865
    first run, being on s754 really kills me for this one, heres 462/385...more to come

    http://service.futuremark.com/compare?2k1=8663271
    23,353

    Opty 144 0546FPMW @ 2.8ghz
    MSI K8N Neo 2
    2 x 512mb OCZ Platinum Rev. 2 TCCD
    ATI X800 Pro @ 570/1200
    Plus some other metal fings...
    Will do me till Conroe
    Heat

  25. #25
    Registered User
    Join Date
    Jun 2005
    Location
    Bancroft, ON, Canada
    Posts
    3,645
    Just curious, maybe it's my memory (the stuff in my head not on my mobo) going or my setup. But I barely got over 25K with my x700pro, Athlon at 2.7Ghz (RAM stuck at 195 while RMA in progress). I loaded a stripped down win2k image, about 6 processes running, ricky tweak, DX 8.1, basic driver (6497) priority set, card clocked at 505/520 (from 425/~434). Stock cooling.

    I can barely beat most of the 9800's and I can't beat all of them. Have I gone totally insane? Or should I just expect a 9800 to be better at a DX8.1 test?
    "Foldin, Foldin, Foldin...keep those benchers foldin..." (Lyrics by Angra, Music is Rawhide)

    BOYCOTT MIR's

    Quote Originally Posted by Monkeywoman View Post
    aww an OC virgin! lose it tonight with Xtremesystems!!!

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •