agreed!Originally Posted by HARDCORECLOCKER
Yeah, very nice work indeed, now we need someone to test all the BIOS versions to find out best for TCCD and BH-5..........
agreed!
The world`s only triple phase-changer PC in one case.
Pretty much we already do take a look at my first post in the thread below every bios is what they have changed what slots to run them in and what ram they work well with...
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Im running a dagf board right now while my ultra-d is being rma'd..
My dagf board runs awsome with the 4-14-05 bios on DFI's site.. Currently running my Sandy @ 260x11..
Awsome little budget mobo..hehe..
I get BSOD when installing Windows...I'm gonna try installing a copy with SP2 (cd from work today).
The board from Fry's has no label on the last PCI slot so I don't know the revision, nor does the stock BIOS have Memtest. I tried to flash to 414-3 using the bootable CD-ROM but it always says "Device Not Ready". What is wrong?
Venice 3500 + XP-90C+Panaflo M @ 301x9 | DFI LANParty UT nF4 Ultra-D 618-2 | Powercolor X850XT + Arctic Silencer 5 Rev2 | OCZ Plat. Rev2 TCC5 2x512 + Thermaltake RAMsinks w/ Zalman Bracket+Fan | 2x RAID 0 SATA Seagate 7200.7 | Audigy 2 ZS | Fortron Blue Storm 500 | Lian-Li PC-7A
someone else has that same problem atm here, still troubleshooting, will let u know what happens.... I'm suspecting the board atm.
ALIENS are bringing my next kentsfield based rig in a UFO case!
How can I check what BIOS version I am running? I hope I am running 310 since I have a Venice on the board....
Venice 3500 + XP-90C+Panaflo M @ 301x9 | DFI LANParty UT nF4 Ultra-D 618-2 | Powercolor X850XT + Arctic Silencer 5 Rev2 | OCZ Plat. Rev2 TCC5 2x512 + Thermaltake RAMsinks w/ Zalman Bracket+Fan | 2x RAID 0 SATA Seagate 7200.7 | Audigy 2 ZS | Fortron Blue Storm 500 | Lian-Li PC-7A
advanced bios -> disable logo (all the way on the bottom) -> save -> during POST look on the lower left hand side of the screen.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
or try Everest Home - free at www.lavalys.com
listedmany places but try Computer/Overclock/bios
Well I finally got to install Windows. Had 1/25 BIOS and it might have been conflicting with Venice. Flashed to 310 with a floppy (boot cd wouldn't flash). Windows install still BSOD, but I upped RAM voltage from 2.6 to 2.8 and it let me install. hurray!
Venice 3500 + XP-90C+Panaflo M @ 301x9 | DFI LANParty UT nF4 Ultra-D 618-2 | Powercolor X850XT + Arctic Silencer 5 Rev2 | OCZ Plat. Rev2 TCC5 2x512 + Thermaltake RAMsinks w/ Zalman Bracket+Fan | 2x RAID 0 SATA Seagate 7200.7 | Audigy 2 ZS | Fortron Blue Storm 500 | Lian-Li PC-7A
Which is the best bios for some ocz eb? I didnt see one there and was wondering.
Hey guys...what are we reckoning about the new 06/15 BIOS. Apparently all the tweaking has to be re-learned all over again
Anyway, its here to download in English
Intel Xeon 3070 @ 3600MHz Stable, 4GHz Max
Abit IP35 Pro
MSI 8800GTX
Custom and blinged out water cooling
Project <<|Black3d|>>
Logitech G5/Saitek Eclipse
Dell 2405FPW 24" TFT
Tagan 1100w
refreshed cdrom image with 615 and replaced 8.59 awdflash w./ 8.6.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
refreshed cdrom image with 618.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
I flashed my Bios from 331-1 to 615 yesterday. Miraccle!!!. It solved my cold boot issues. But it affectes my oc. On 331-1 I could oc to 260Mhz @ 2-2-2-2 at 3.6vdimm stable. But now I could not do 260Mhz at the same settings. Bios 615 is quite picky on the RAM timing. I have to lower the CL to 2.5 in order to get my comp stable occasionally. I said occasionally becoz, at 260Mhz @ 2.5-2-2-2, my windows might hang during application such as 3DMark 2001 SE or Prime95 or during gaming such as Far Cry. Well! there is a lost and a gain for my case. But it is better than 'living with Cold Boot'. As for USB Problem, I did not encounter as I am on Ps/2 mouse and keyboard. Will try some tweaking and bencies tonight to make my tight timing to gain its stablility. Hmmm...this proof that my icute (PSU) is not the problem althought it has only 20pin
My sig
-----------------
Winnie 3000+@ 2340Mhz @ 1.52vcore(Stock cool)
DFI NF4 Ultra-D (Bios 615) Rev. A3
TwinMos SP UTT 256mb x2 (PC3200) @ 2.5-2-2-2 @ 3.6vdimm
IDE Hitachi 80gb 7200rpm 2 mb
Gigabyte 6600GT 500/1000
LG DVD Rom
Gigabyte CD ROM
Panasonic Floopy
icute 420watt PSU
Furry muff, but DFI's HATE 20pin connectors any rate, so I would just get a 24pin PSU and comply with the specs
Can't wait for payday and my PCP&C 5109 SLi!!
Intel Xeon 3070 @ 3600MHz Stable, 4GHz Max
Abit IP35 Pro
MSI 8800GTX
Custom and blinged out water cooling
Project <<|Black3d|>>
Logitech G5/Saitek Eclipse
Dell 2405FPW 24" TFT
Tagan 1100w
firedragon, please append the below lines, right below the ISO BIOS Pack download:
For users recieving 'Disk Not Ready' when trying to flash with the above ISO:
310+510-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_510-mini.rar
310+618-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_618-mini.rar
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
refreshed main cdrom iso image with 623-1/-2/-3 and compiled a '-mini' consisting of 310+623-1/-2/-3
310+623-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_623-mini.rar
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
refreshed cdrom ISO w./ 510-1/-2/-3 Tune Up and compiled a -mini.
310+510-1f/-2f/-3f:
http://indabasement.com/DFINF4/bios/310_510f-mini.rar
Last edited by pershoot; 06-23-2005 at 07:21 AM.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
Just got my board, had 1.25 on it, flashed to 623 Rev 3 with the mini (having the "Disk Not Ready" error with full iso) and every thing seems to be working great now, even put a halt to my reboot issue. Thanks for posting this up.
refreshed cdrom image with 702-1/-2/-3 and compiled a -mini.
**THIS IS ALPHA.** USE AT YOUR OWN RISK! Please peruse the Discussion/Feedback link first if in doubt/for more info.
Discussion/Feedback Thread (702):
http://www.xtremesystems.org/forums/...ad.php?t=67540
Bootable CDROM (ISO) DOS Image w./ All Bios Revisions to Date (7/02/05):
http://indabasement.com/DFINF4/bios/DFI_BIOSROM.rar
310+702-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_702-mini.rar
Last edited by pershoot; 07-01-2005 at 08:43 PM.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
Added the new 7.02 bios's on www.dfi-bios.tk now.
Intel FTW!
Beanna
refreshed cdrom image w./ merlin's 510-2f (Tune Up) w./ hellfire's 3.16.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
refreshed cdrom image w./ merlin's 0307 & 704 & compiled a -mini
310+704-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_704-mini.rar
Last edited by pershoot; 07-04-2005 at 10:26 AM.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
pershoot - per Oskar's request, please remove the 704 BIOS bro...
Thread here
Oskar's post
Peace
added to -mini 704 and full ISO:
echo MAJOR BUG IN 704 (Vcore Special 123%+ May Cause CPU Failure/Death In Certain Situations):
echo http://www.dfi-street.com/forum/showthread.php?t=16500
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
Posting Permissions
Reply With Quote
Bookmarks