And I don't simply mean
I mean "in a trance, saliva running down the neck, glazed eye"
And I don't simply mean
I mean "in a trance, saliva running down the neck, glazed eye"
Ok, this is my first Post and when i signed up this site i heard there was some hardcore OverClockers, but this more then i expected well done on the rig!
awesome memory clocks, amazing cpu speeds and one of the most genuine attitudes around.
well clocked and well earned OPB
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
should get exciting if you put a cascade on that video card i bet youll get the record
________
Amura
Last edited by brandinb; 05-03-2011 at 07:24 PM.
OPB and OPP need to work together
jjcom
yeah, no kiddin'Originally Posted by jjcom
OPB and OPP need to work together
jjcom
sheer, massive CPU/Mem powa' meets the master's Tweaks, GPU cascade and x800....
=wow!!
Would be very interesting to see...I can see a threads now.
"OPP and me had some fun last...I was disappointed"
then a 45k 01 screen shot
jjcom
Sorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).
JJcom, I will need to get mature enough to work with King of OC.
I am still young.
oh no... can you repair the fx?Sorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).
JJcom, I will need to get mature enough to work with King of OC.
I am still young.
E2160 @ 360x9, max 390x9 watercooled
GA-P35-DS3
Cellshock D9GMH @ 545mhz cl5-5-5-5-15
Palit 7300gt 500/1000 @ 780/1600 watercooled
Sorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).
JJcom, I will need to get mature enough to work with King of OC.
I am still young.
Good luck Kevin !!!
Previous system:
----------------><------------------
no way, unless AMD read this and support me.
** I think that can't be RMA as well.
no way, unless AMD read this and support me.
** I think that can't be RMA as well.
Previous system:
---------------->
Sorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).crap - sorry to hear, your cpu survived extreme sub zero temps only to be killed by the floor
---
See if a jeweller can solder them back on for you.
Thank you, very nice work. I have a High Speed PC Tech station I'm putting together but I like your large work area!Sorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).
JJcom, I will need to get mature enough to work with King of OC.
I am still young.
Old Standby:
DFI LANPARTY nF4 Ultra-D (R.AD0) 623-3 BIOS
AMD Athlon 64 3800+ X2 (CCBWE 0529SPMW)
THERMALRIGHT XP-90 w/Panaflo FBA09A12H-1AZ 90mm (56.8cfm) - AS Ceramique
MSI NX6600GT-TD128E GF 6600 GT PCI-E
WD Raptor 74G Boot, WD 1200JB IDE
NEC ND-3520AW Black
OCZ OCZ600ADJ ATX 600W
ALPS Black 1.44MB 3.5" Internal Floppy Drive Model DF354H121F
Lian Li PC-60USB B2 Silver Aluminum ATX Mid Tower Computer Case
Win XP Pro (32-bit) SP2
If they aren't bent too bad you might be able to use a razer/needle something to gently push them back into proper form. I've done that a few times. Sucks though because they do weaken, always scared to death they'll break/fall out so I leave em in the socket for a while after that.
Sux to hear that happen to your gem.....it really does.
Funny story, I broke a pin off my 2.8C a good while back, and it didn't effect a single thing, I wish I would have taken a pic of which pin it was, cus it's been fine every since.
• Intel Core i7 875K @ 3.86GHz 1.35v /w Intel Extreme Tower Heatsink
• Intel Extreme DP55KG
• 2x2GB Kingston HyperX PC3-10666
• ATI HD5970 2GB @ 850/1,200
• Lian-Li PC-7B
• Corsair TX750 PSU
![Send a message via AIM to [XC] moddolicous](images/misc/im_aim.gif)
NOOO, thats hooribleSorry take so long to reply this:
Yes I build it, and I cut a bit for insulation so i can isolate the air get into the backside of motherboard.
It's always my pleasure to have master like Charlie here. Man, I just dropped my fx55 and it got broken( 14 pins).
JJcom, I will need to get mature enough to work with King of OC.
I am still young.
Cant RMA a broken FX-55 !!! OMG I think AMD should certainly send you one, you've advertised their product enough times at insane speeds too. But if you ultimately cant RMA it, a repair job would be a good idea considering its not a Winnie ITS AN FX-55 !!!** I think that can't be RMA as well.
Perkam
Thank you for all you guys.
Perkam, I think AMD should do, have some friends send this to AMD.
it's not just " try fix"..it's really horrible.
dam, thats ul OPB, sure you cant RMA it ?
Nice scores none the less!
You can unsolder all the broken pins and solder replacements on. All you need is to track down the supplier of the raw pins. There aren't that many pin makers. Its just a thin PCboard with pins on the bottom, and the DIE soldered ontop and some resistor/capacitors soldered on. Simple "concept" actually. If the chip is a keeper....seriously... then put the effort in repairing it and DONT fk it up next time.
GA-MA790GP-D4SH, 965BE, 3.8Ghz
Ultra120E, 4x2G Gskill 1066
2x 150G VRaptor raid, WD640AALS
8800GT 735/940/1685, LG-BluRay
oh man!!! that just can't be OPB !!!
am i blind or all the pins are still in place but just bent a bit ???
EDIT: oh, I just looked closer at the bottom row... are they GONE ??? that sucks BIG time... sorry, OPB
Great overclock mate, shame about the chip.
OPB you have a PM
holst, Thank you very much to bring the hope to me.
PM Replied.
OPB
Posting Permissions
Reply With Quote
Bookmarks