iam looking for easyest nf7 vdimm mod, iam concern about that vtt,can i do some vdimm mod that dont need to vtt mod too,so plz give me links,i know that on XS have a lot of them but what mod should i choose?
D point is to get at least 3.2V vdimm!tnx
iam looking for easyest nf7 vdimm mod, iam concern about that vtt,can i do some vdimm mod that dont need to vtt mod too,so plz give me links,i know that on XS have a lot of them but what mod should i choose?
D point is to get at least 3.2V vdimm!tnx
I think that the easiest Vdimm mod to do would be the Vdimm=Vio mod, where the Vdimm voltage will exactly equal your 3.3v line. Vtt appears to follow with this mod, so you won't have to do a Vtt mod. There should be lots of threads about the mod on the forums.
so i was thinking that too,seems to be that i will do that mod,simple,no resistors,just wiresbut question is will 3.3v be onli in slot that is connect with wire or the others slots will have 3.3v ?
All the slots will have 3.3 V, it is really simple Vmod, it took me 5 minutes to do itOriginally Posted by komer
so i was thinking that too,seems to be that i will do that mod,simple,no resistors,just wires.
But probably your PSU must have a 3,3V sense wire. Without that, mod won't working.
.
.:Venice 3000+
.:HIS X800
.:OCZ VX
.:Tagan 480-U01
>WC >> X2P >> Water Dragon >> Laing >> BIX<
Edited for language
Keep it cool, bro.
Last edited by Malves; 03-07-2005 at 04:13 PM.
offline, mail only
what is a sense wire?
it`s wire used to monitoring voltage and keep it in corect value
offline, mail only
so will it works without that or not?
yes
offline, mail only
tnx,hope i will do this mod soon
Are you sure? U tested it? Look at this:....
http://www.xtremesystems.org/forums/...ad.php?t=47015
look at Melchior posts...
Last edited by Malves; 03-13-2005 at 05:05 PM.
.
.:Venice 3000+
.:HIS X800
.:OCZ VX
.:Tagan 480-U01
>WC >> X2P >> Water Dragon >> Laing >> BIX<
i have brown wire and orange(3.3v) conected into connector of psu,that mean that i have sense wire....
is vdd booster "must have" for this mod,or can work without that?
So just follow yellow line:
http://www.xtremesystems.org/forums/...chmentid=15518
Vdd booster does nothing, and mod works without it.
.
.:Venice 3000+
.:HIS X800
.:OCZ VX
.:Tagan 480-U01
>WC >> X2P >> Water Dragon >> Laing >> BIX<
,np,i will do like that,but i need a iron solder with smaller power,a 40w is a bit much,and with thiner top
40w is not too much for PCB soldering.. just don't stick it right on the board or anything.
DFI LP LT X38-T2R
Intel Core 2 Quad Q9450
Thermalright Ultra-120 eXtreme
2x2GB OCZ Reaper DDR2 PC8500
eVGA 9800 GX2
WD Raptor X 150GB
PCP&P 750W Silencer
CM Stacker 830 SE
long time ago have got a psu ("megabajt") without 3.3sens wire and mod work`s fine, now it`s frayed, but maybe can find another... and check again or i will just cut that sens wire :]
it gives some xtra power to Vdd, it links 5V trace in pcb.
Last edited by owies; 03-07-2005 at 09:55 AM.
offline, mail only
I did that mod that's linked to (only yellow line) a couple of days ago and it didn't help me anything at all. The voltage did change but I could neither get a higher FSB nor tighter timings (I was getting 238 FSB without the mod already tho but was hoping to get it stable and higher with the mod).
So I'm gonna have to order some resistors and heatsinks and do some more modding. I suspect the NB is holding me back. I hate not having an electronics store within a radius of like 100 km.
Anyway, just wanted to warn you so you don't get disappointed like I did. Good luck and let us (me) know how it worked for you
well i will tell you but i have bad iron solder,with large top,if i will use that i will solder 5 pins on mbo!i need iron solder with thin top!
Posting Permissions
Reply With Quote
Bookmarks