Fixing DDR SDRAM Memory Modules' SPD Information

[Ascii2]

I want to properly set the SPD data of two modules and correct for any errors there may be.

I have two, double-sided DIMMs of DDR SDRAM modules from an unknown original source. The modules use Hynix HY5DU12822DTP-D43 memory chips. The modules' SPD data seem to have been edited and one module appears to have the EEPROM replaced. The sticker labels do not appear to be from any particular memory OEM.

I have provided a picture of the memory modules.
I have dumped the SPD data of the modules with SPDTool 0.63 and have attached them here.
The datasheet for the memory chips may be found: http://docs-usa.electrocomponents.co...tockno=6686199 .

The CPU- Z 1.64.0.x32 data from the modules:

Memory SPD
-------------------------------------------------------------------------

DIMM #				1
	SMBus address		0x50
	Memory type		DDR
	Manufacturer (ID)	PNY Electronics (7FBA000000000000)
	Size			1024 MBytes
	Max bandwidth		PC3200 (200 MHz)
	Part number		
	Manufacturing date	Week 07/Year 69
	Number of banks		2
	Data width		64 bits
	Correction		None
	Registered		no
	Buffered		no
	Nominal Voltage		2.50 Volts
	EPP			no
	XMP			no
	AMP			no
JEDEC timings table		CL-tRCD-tRP-tRAS-tRC @ frequency
	JEDEC #1		2.0-2-2-6-n.a. @ 133 MHz
	JEDEC #2		2.5-3-3-7-n.a. @ 166 MHz
	JEDEC #3		3.0-3-3-8-n.a. @ 200 MHz

DIMM #				2
	SMBus address		0x52
	Memory type		DDR
	Manufacturer (ID)	 (0000000000000000)
	Size			1024 MBytes
	Max bandwidth		PC3200 (200 MHz)
	Part number		
	Serial number		FFFFFFFF
	Manufacturing date	Week 255/Year 255
	Number of banks		2
	Data width		64 bits
	Correction		None
	Registered		no
	Buffered		no
	Nominal Voltage		2.50 Volts
	EPP			no
	XMP			no
	AMP			no
JEDEC timings table		CL-tRCD-tRP-tRAS-tRC @ frequency
	JEDEC #1		2.0-2-2-6-n.a. @ 133 MHz
	JEDEC #2		2.5-3-3-7-n.a. @ 166 MHz
	JEDEC #3		3.0-3-3-8-n.a. @ 200 MHz

DIMM #				1
SPD registers	
		00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 
	00	80 08 07 0D 0B 02 40 00 04 50 70 00 82 08 00 01 
	10	0E 04 1C 01 02 20 30 60 70 75 70 3C 28 3C 28 80 
	20	60 60 40 40 00 00 00 00 00 37 46 30 28 50 00 00 
	30	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1B 
	40	7F BA 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	50	00 00 00 00 00 00 00 00 00 00 00 00 00 45 07 00 
	60	00 00 00 FF 00 00 00 00 50 4E 59 20 54 65 63 68 
	70	6E 6F 6C 6F 67 69 65 73 2C 20 49 6E 63 2E 00 00 
	80	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	90	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	A0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	B0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	C0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	D0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	E0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	F0	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

DIMM #				2
SPD registers	
		00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 
	00	80 08 07 0D 0B 02 40 00 04 50 70 00 82 08 00 01 
	10	0E 04 1C 01 02 20 00 60 70 75 70 3C 28 3C 28 80 
	20	60 60 40 40 00 00 00 00 00 37 46 30 28 50 00 00 
	30	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EB 
	40	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	50	00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF 
	60	FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 
	70	00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 
	80	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	90	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	A0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	B0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	C0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	D0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	E0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
	F0	FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

I request assistance in determining proper SPD register vales for the two modules.