MMM
Results 1 to 25 of 57

Thread: Overclocking Thread of Celeron D (Cedar Mill) on P45 Chipset or any Unfriendly Mobo

Hybrid View

  1. 03-14-2013, 01:29 AM #1
    Keny
    Keny is offline
    Registered User
    Join Date
    Mar 2013
    Posts
    14
    Quote Originally Posted by wytiwx View Post
    Vcore from CPU-Z is not so accurate, for example VID 1.2500V and 1.2625V can be showed as the same 1.235V.

    Now the way is to measure these 8 pins voltage to GND. About 0.3V means "0", about 1.2V means "1".
    Ok measured them out and the results are below, thanks for the help on this BTW.

    Reply With Quote Reply With Quote
  2. 03-14-2013, 08:01 AM #2
    wytiwx
    wytiwx is offline
    Xtreme Member
    Join Date
    Jul 2010
    Location
    China
    Posts
    105
    Quote Originally Posted by Keny View Post
    Ok measured them out and the results are below, thanks for the help on this BTW.

    As your test result, VID [7:0] should be 01110011, Vcore in VRD 10.1 should be 1.3750V, but in VRD 11 this VID code is weird.

    What is your Prescott CPU? Is Vcore on old 775 mobo ~1.35V ?
    Last edited by wytiwx; 03-14-2013 at 08:12 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules