Hello overclockers/modders
our website have put a little guide online to mod you x800pro to an xtreme machine.
with clear pics and a bit good english we would like to help you with it.
http://www.voidyourwarranty.nl/content.php?article.45
have fun !!
the guide is updated now , check the link a gain and now also you could see clear pic how the mod should look like when its finished
Very informative, no BS & very nice clear pics there.
Now to get my card ready....
BioBlade, what was your highest OC w/out the mods & after the mods??
Mine so far w/out mods & stock cooler was 585/585...
With WC & ramsinks, it only rose to 600/600...
Hoping to get more...
Cheers for that.
Minnyboy
Cheers,
Minh
Mine:3770k @ 4.6Ghz @1.25v, Corsair H80, Asus SabreTooth Z77, 4 x 4GB Corsair Vengeance 1600C8, XFX 7870DD, Corsair HX850w, Sandisk 240GB Extreme SSD, Corsair Graphite 600T
Kids: 2500k @ 4.6Ghz @1.368v, TRUE120, 2 x 4Gb Corsair Vengeance 1600C9, Gigabyte Z68X-UD4-B3, Gigabyte HD6870, Sandisk 240GB Extreme SSD, 850w Thermaltake 850w PSU, Antec P182 Case
Kids2: i3 3225, 2 x 4Gb Kingston HyperX 1600C9, ASUS P8Z68-M PRO, Sapphire HD4870 1GB, 128GB Samsung 830 SSD
Server: Core2Quad 9450, 2 x 2Gb Kingston HyperX 1066, 2 x 2Gb Corsair XMS1066, Gigabyte EP45-DS5, Corsair HX650w, OCZ 120GB Vertex 2E SSD, WD 1TB Black, 2TB Seagate 5900rpm, 2TB Seagate 7200rpm
withou any mods stock cooled :
565mhz core and 580Mhz mem
with wc and ramsinks :
580mhz core and 595Mhz mem
with wc ,ramsink & v-mods :
610Mhz core and 612Mhz mem
i don't have a verry good overclocking sample
the voltages at max oc are 1.46v for the core en 2.07v fot the mem
BioBlade,
Did you try to unlock the 4 pipelines??
That's what I intend to do.... hopefully unlocking the 4 pipelines is not a total myth...
Mine's a Powercolor X800pro
codes are:
GB7279.1
0418AA
Will get my card modded & post back in this thread my results...
Been looking for clear instructions on how to mod the Vmem & finally found it.
Don't expect it too soon though as I gotta fit this in between work & my little boy.
Cheers,
Minnyboy
Cheers,
Minh
Mine:3770k @ 4.6Ghz @1.25v, Corsair H80, Asus SabreTooth Z77, 4 x 4GB Corsair Vengeance 1600C8, XFX 7870DD, Corsair HX850w, Sandisk 240GB Extreme SSD, Corsair Graphite 600T
Kids: 2500k @ 4.6Ghz @1.368v, TRUE120, 2 x 4Gb Corsair Vengeance 1600C9, Gigabyte Z68X-UD4-B3, Gigabyte HD6870, Sandisk 240GB Extreme SSD, 850w Thermaltake 850w PSU, Antec P182 Case
Kids2: i3 3225, 2 x 4Gb Kingston HyperX 1600C9, ASUS P8Z68-M PRO, Sapphire HD4870 1GB, 128GB Samsung 830 SSD
Server: Core2Quad 9450, 2 x 2Gb Kingston HyperX 1066, 2 x 2Gb Corsair XMS1066, Gigabyte EP45-DS5, Corsair HX650w, OCZ 120GB Vertex 2E SSD, WD 1TB Black, 2TB Seagate 5900rpm, 2TB Seagate 7200rpm
the extra pipe's won't work @ my card
got a 0414aa 8229.1
but i am glad with my card so i keep it
Nice guide, I'm going to do the mods myself when I get better cooling
Lian Li V1000 | OCZ Powerstream 600 Watt
DFI Lanparty nF4 SLI-DR Expert
Opteron 148 @ 2200Mhz
Mushkin RedLine PC4000 | 250Mhz 2-2-2-5
2 x XFX 7800GTX (500|1275)
74GB Western Digital Raptor/2 x Maxtor 300GB SATA
Dell 2005FPW 21" Widescreen Monitor
3DMark 2001SE - X850XT 40.4K Air Cooled Card
3DMark 03 - 7800GTX 18.3K Air Cooled System
3D Mark 05 - 7800GTX 8.5K Air Cooled System
Redline3D
i have 1 problem i could not get above 1.46v with my v-mod , verry strangen even not when i turn the 10kvr @ max?
anybody a solution?
may i ask a stupid question. for the vmem mod does one start with the vr set to 20K or 0k. i think it is 20 but i would like to make sure so i don't blow my card
btw i got to 1.51 vcore using only the pencil mod
edit: nevermind it is 20k to start
Last edited by s e t h; 07-02-2004 at 12:32 AM.
are x800 pro v-mods the same as x800xt mods???
yes totally the same. I would suggest doing a VR mod tho and not the pencil thing.
Overclocking made in Austria
Posting Permissions
Reply With Quote
Bookmarks