XtremeSystems Forums

Go Back   XtremeSystems Forums > Xtreme > Xtreme Mods

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-01-2009, 04:30 PM   #326
Semicycle
Xtreme Member
 
Join Date: Oct 2005
Location: Hampton Roads, VA
Posts: 131
My First Res

I used a junction box to submerge a danner pump... I created the fill port from a soda bottle

Semicycle is offline   Reply With Quote
Old 07-06-2009, 05:33 PM   #327
saint-francis
Xtreme Member
 
saint-francis's Avatar
 
Join Date: Jan 2007
Location: Over the mountains and down in the valley
Posts: 397
Here's mine. It is silent aside from the damn board squealing. Pretty much everything I can cool with water is cooled with water. SB, CPU, NB, PWM and GPU. I got tired of having fans and a pump buzzing away.





Notice the Ethernet drop I put in and how my SPDIF connects to the same plate with BNC and travels through the floor to the receiver on the other side of the room .









And let's not forget how the HDD's hang from bicycle tire tubes.

__________________
Quote:
Originally Posted by Manicdan View Post
using a OCed quad for torrenting is like robbing your local video store with a rocket launcher.
saint-francis is offline   Reply With Quote
Old 07-06-2009, 05:39 PM   #328
dinos22
Team "TwoForForty"
 
dinos22's Avatar
 
Join Date: Mar 2005
Location: Australia
Posts: 15,829
nice one
__________________
Team.AU
GIGABYTE Australia

Got tube?
Need a GIGABYTE bios?
dinos22 is offline   Reply With Quote
Old 07-06-2009, 08:12 PM   #329
apt403
Xtreme Member
 
apt403's Avatar
 
Join Date: Oct 2006
Location: Redding, CA
Posts: 232
I hacked apart an old Antec PSU, cut the 24 pin connector into an 8 pin connector, and taped the wires up with scotch tape to ghetto rig my computer into working while I was waiting for an 8 pin extender. I'll get pics up when I get home in the next couple days.

Closest things I've got ATM are pics of my old suicide run setup:



The makings of a bong cooler for my E6300:



And my cooling device for my Macbook's power brick during the summer:





__________________
iPOS

Last edited by apt403; 07-06-2009 at 08:21 PM.
apt403 is offline   Reply With Quote
Old 07-09-2009, 02:17 AM   #330
Theorw
Xtreme Member
 
Join Date: Mar 2009
Posts: 139
Back when i had my 1900xt @715/1792 on stock cooler i had to keep the VRMs cool enough!So i mad this ghetto airduct with paper and a fan from a dead x600xt!!!
The other photos are from my 2400pro that was idling@ 65+ and after ther xtreme spirit 2 cooler was @load @40!!!






Theorw is offline   Reply With Quote
Old 07-09-2009, 03:36 AM   #331
zalbard
I am Xtreme
 
zalbard's Avatar
 
Join Date: Dec 2008
Location: Russia (for now)
Posts: 4,677
Send a message via MSN to zalbard
I didn't know there was a great thread over here hiding. It made my day!
zalbard is offline   Reply With Quote
Old 07-15-2009, 02:10 PM   #332
BoNg
Registered User
 
Join Date: Jun 2009
Posts: 53
ZOMG
Quote:
Originally Posted by apt403 View Post

The makings of a bong cooler for my E6300:

keep it up everyone
__________________
-phenom II x4 955 BE 3.7 GHz
-msi 790fx-gd70 bios ver 1.6
-8 GB - OCZ platinum amd edition 1600 MHz @ 7-7-7-24-28-1T@1.72 v - OCZ3P1600LVAM4GK
-msi radeon 4890 oc edition 955/1150
-2x western digital caviar black 640GB
-kingwin mach 1 1220 w psu
-coolermaster cm690 nvidia edition (LOL)
BoNg is offline   Reply With Quote
Old 07-15-2009, 02:26 PM   #333
Baron_Greenback
Registered User
 
Join Date: Mar 2008
Location: Tamworth. UK.
Posts: 24
Send a message via MSN to Baron_Greenback
This is my best effort at "ghetto"



__________________

WC'd V2000 - LittleDevil SS Phase - QX9650 - Patriot Viper PC15000 - 9800GX2
Baron_Greenback is offline   Reply With Quote
Old 07-15-2009, 05:40 PM   #334
dum
Xtreme Member
 
dum's Avatar
 
Join Date: Jul 2006
Location: New Smyrna Beach Florida
Posts: 266
this thread is classic thx all, I love xtremesystems
__________________
Intel DP45SG
4 gigs DDR3 G-Skill 8-8-8-20
640 Caviar Black
Dual 755 sa plextor
Asus EAH TOP 4890 1 gig ddr5
Q9550
Zalman9500
Thermaltake Armor
dum is offline   Reply With Quote
Old 07-15-2009, 06:58 PM   #335
biglipzit
I am Xtreme
 
biglipzit's Avatar
 
Join Date: Dec 2003
Location: St. Lucia
Posts: 388
Send a message via AIM to biglipzit Send a message via MSN to biglipzit Send a message via Yahoo to biglipzit Send a message via Skype™ to biglipzit


Here is how you fix the broken fan on your videocard and keep it slim enough for cross fire x action
__________________
Thermaltake Xaser VI Case
Gigabyte MA790FXT-UD5P
AMD Phenom II 955BE
Dual Sapphire 3870X2's
4 gigs of Kingston HyperX DDR3 333mhz
Coolermaster V10
Coolermaster UCP-1100W PSU


Quote:
Originally Posted by {GOD}Raptor22
I find it exceedingly humorous how you sit here and continue to play keyboard warrior even though you know you are wrong.
biglipzit is offline   Reply With Quote
Old 07-16-2009, 09:07 AM   #336
Lone Morgen
Registered User
 
Join Date: Jan 2009
Posts: 4


my old ibm 30Go

http://hbready.free.fr/hdd-int/SiHdd1.JPG
http://hbready.free.fr/hdd-int/SiHdd2.JPG
http://hbready.free.fr/hdd-int/SiHdd3.JPG
worked 3 years quite silently XD

oups size

Last edited by Lone Morgen; 07-16-2009 at 09:09 AM.
Lone Morgen is offline   Reply With Quote
Old 07-16-2009, 09:13 AM   #337
Lone Morgen
Registered User
 
Join Date: Jan 2009
Posts: 4





ghetto 4 dust
Lone Morgen is offline   Reply With Quote
Old 07-16-2009, 09:18 AM   #338
Lone Morgen
Registered User
 
Join Date: Jan 2009
Posts: 4
2.5 to 5.25 adaptator

http://hbready.free.fr/rack&baie/rackmousseV2.jpg
http://hbready.free.fr/rack&baie/rac...V2HDDfixV2.jpg
http://hbready.free.fr/rack&baie/RackMousseV2pack.jpg
http://hbready.free.fr/rack&baie/Rac...eV2install.jpg

Last edited by Lone Morgen; 07-16-2009 at 09:20 AM.
Lone Morgen is offline   Reply With Quote
Old 07-16-2009, 09:19 AM   #339
Lone Morgen
Registered User
 
Join Date: Jan 2009
Posts: 4
convert 3.5 in 5.25 Xqpack case



official frogies ghetto site:
http://www.honteuxbidouillages.com

Last edited by Lone Morgen; 07-16-2009 at 09:43 AM.
Lone Morgen is offline   Reply With Quote
Old 07-18-2009, 01:18 PM   #340
Andrea deluxe
Xtreme Member
 
Andrea deluxe's Avatar
 
Join Date: Jan 2009
Location: ITALY
Posts: 449
My friends Ghetto..

Andrea deluxe is offline   Reply With Quote
Old 07-26-2009, 04:05 AM   #341
Kain665
Xtreme Member
 
Join Date: Sep 2007
Posts: 263
I'm sure this has been done before but I was mighty proud of myself when I did it a year back:

__________________

Q9550 4ghz (475x8.5) 1.32v load (Megahalem Push/Pull)
Asus P5Q - Deluxe (m2102) 1.36v NB
4gb Crucial Ballistix Red (6-6-6-18 @ 1140mhz, 9.3gb/s read)
Asus / Sapphire 5850 AC Twin Turbo Pros - 900/1200 in CFX(Thanks Playah)
OCZ GXS 1010w Burnt out!
PC Power & Cooling Turbocool 1KW
Lian Li V1200

Kain665 is offline   Reply With Quote
Old 07-26-2009, 06:38 AM   #342
railmeat
Xtreme Enthusiast
 
railmeat's Avatar
 
Join Date: Jun 2004
Location: plan3t 3@rth
Posts: 917
Quote:
Originally Posted by Kain665 View Post
I'm sure this has been done before but I was mighty proud of myself when I did it a year back:

i wanna see pics with that installed and not breaking off in the mobo...lol
__________________
Stacker830 Watercooled
windows7 ultimate 64 bit!!!
GtZ on i7 930 @ 4.2ghz 1.28v, Swiftech Mcp-655
9x120 sunnons on lamptron fc3 controller,
triple 120mm rad,gigabyte x58-a-ud3r,
150 gig velicraptor (stable drive) ssds die
xfi-xtrememusic,klipsch ultras, sen hd-595s
co0lermaster-1250 watt,Evga/koolance gtX 480
22"Diamondtron p1230
cod4-mw2 @ 2048x1536 85hz/91fps SOLID
G@m3r 4 L1Fe!!
3dmark06
http://service.futuremark.com/compare?3dm06=13806719
railmeat is offline   Reply With Quote
Old 07-26-2009, 07:35 AM   #343
sirheck
Xtreme Addict
 
sirheck's Avatar
 
Join Date: Aug 2006
Location: Oklahoma
Posts: 1,203




__________________
_______________
Q66@3.8ghz
Rampage/Maximus SE hybrid W/C. 4 gigs OCZ reapers.
4890,s CF Dual loop rocketfish case.


Quote:
Originally Posted by Vapor View Post
There's a lot less voodoo in watercooling than is assumed
The only thing future proof in electronics, is the electricity itself.

Any one who relies on only one source of information is a fool.
sirheck is offline   Reply With Quote
Old 07-26-2009, 01:33 PM   #344
Kain665
Xtreme Member
 
Join Date: Sep 2007
Posts: 263
Quote:
Originally Posted by railmeat View Post
i wanna see pics with that installed and not breaking off in the mobo...lol
Heh, it doesn't fit in any case, that's why i'm not using it right now. It extends about an inch below the bottom end of an ATX board. If I bend it in, It doesn't clear the PCI slots, just barely.

Kudos to whoever can guess what card it is, should be fairly easy with the dual molex connectors.
__________________

Q9550 4ghz (475x8.5) 1.32v load (Megahalem Push/Pull)
Asus P5Q - Deluxe (m2102) 1.36v NB
4gb Crucial Ballistix Red (6-6-6-18 @ 1140mhz, 9.3gb/s read)
Asus / Sapphire 5850 AC Twin Turbo Pros - 900/1200 in CFX(Thanks Playah)
OCZ GXS 1010w Burnt out!
PC Power & Cooling Turbocool 1KW
Lian Li V1200

Kain665 is offline   Reply With Quote
Old 07-26-2009, 01:37 PM   #345
ownage
Xtreme Addict
 
Join Date: Aug 2006
Location: The Netherlands, Friesland
Posts: 2,232
Kain665: Why not just use a bolt? Its allot of weight and I wouldn't trust zipties.
__________________
>Q6600 3.7ghz 1.56v (max 58c full load)
>MSI P35 Neo2-FR
>HD4890
>Cosmos 1000
>CM Silent Pro M700
>SSD, Intel X25M G2
>H2O---MCP655 - XSPC360 - Apogee GT - HWlabs 240 stealth - Fuzion GFX - MCRES.
ownage is offline   Reply With Quote
Old 07-26-2009, 01:43 PM   #346
Kain665
Xtreme Member
 
Join Date: Sep 2007
Posts: 263
Meh, I never got around to using it. I was going to use two Arctic Cooling silencer backplates (Like the one on top) and 4 screwed but I never got around to it. Zip ties held it on fairly well though.
__________________

Q9550 4ghz (475x8.5) 1.32v load (Megahalem Push/Pull)
Asus P5Q - Deluxe (m2102) 1.36v NB
4gb Crucial Ballistix Red (6-6-6-18 @ 1140mhz, 9.3gb/s read)
Asus / Sapphire 5850 AC Twin Turbo Pros - 900/1200 in CFX(Thanks Playah)
OCZ GXS 1010w Burnt out!
PC Power & Cooling Turbocool 1KW
Lian Li V1200

Kain665 is offline   Reply With Quote
Old 07-28-2009, 05:47 PM   #347
grasskicker509
Xtreme Member
 
Join Date: Jan 2007
Posts: 131
Quote:
Originally Posted by Baron_Greenback View Post
This is my best effort at "ghetto"



dang u got guts! putting ur hardware so close to water
__________________
Abit Quad GT 965 (still rocking!)
E6600 @ 3.5Ghz
2X1Gb Crucial Ballistix
Saphirre HD 4850X2
Enermax REVOLUTION 1050W
2x160 Gb Raid 0 Hitachi HDD
grasskicker509 is offline   Reply With Quote
Old 08-18-2009, 04:47 PM   #348
Anarki
Xtreme Enthusiast
 
Anarki's Avatar
 
Join Date: Dec 2003
Location: UK
Posts: 703
E74 failed xbox:





I remounted the GPU and CPU heatsink after clearing away the generic paste, applying some AS5 and modding the x-clamp.

I then modded a 120mm fan to the pin layout of the 360's 3pin header, put it directly over the heatpipe heatsink of the GPU and over the CPU.



This in turn = a fixed xbox:



COD4 stable for an hour, no more time for testing, I'm too tired

Lastly... So many RROD'd xboxes I need to fix that are out of warranty:

__________________
Anarki is offline   Reply With Quote
Old 08-21-2009, 12:23 AM   #349
s0lid
Great 93.
 
s0lid's Avatar
 
Join Date: Jul 2007
Location: Finland/Oulu
Posts: 2,066
Send a message via MSN to s0lid
Man i'd need one RRoD'd xbox Just as a rescue project.
__________________
WTB: ALR 6x6! Hexa socket Pentium Pro system!
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Quote:
[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
--->Blog<---

Main rig: Intel and ATI with ZOMGWTFBBQ Overclocks.
s0lid is offline   Reply With Quote
Old 08-24-2009, 01:17 PM   #350
NoM$_YesLinux
Registered User
 
NoM$_YesLinux's Avatar
 
Join Date: Feb 2008
Location: Brazil
Posts: 44
This cheapo Evercool heatsink:


+

Two Vizo Windstorm 92mm 110cfm monsters...


and a crazy guy...

=





Result:

http://valid.canardpc.com/show_oc.php?id=671656

__________________



Last edited by NoM$_YesLinux; 08-24-2009 at 01:22 PM.
NoM$_YesLinux is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 08:15 AM.


Powered by vBulletin® Version 3.7.6
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
XtremeSystems