MMM
Results 1 to 9 of 9

Thread: New System Questions

  1. #1
    Registered User
    Join Date
    Apr 2008
    Posts
    9

    New System Questions

    Ok i just finished putting this togeather and am new at overclocking and such but before i even start going all out i would like to know how these temps are and a couple of questions i know that the bottom is my vid card on speed fan it isnt that i am worried about it is the AUX it seems to be pretty high




    Intel I7 950 / Water Cooling

    Asus Rampage III Formula Rog X58/3 x 1Tb hard drives

    12 gig Corsair Vengence 1600 3x4/SAphire 6970 2 gig

    Corsair 800D case /750AX Corsair PSU

    3x Samsung E2320 Lcds in Eyefinity

    http://imageshack.us/photo/my-images/687/img4950it.jpg/

  2. #2
    Registered User
    Join Date
    Mar 2008
    Location
    Wherever I may roam...
    Posts
    591
    It def looks like your in idle, so your temps are fine but what about at load whe all pistons (so to speak) are pumping?

  3. #3
    Registered User
    Join Date
    Apr 2008
    Posts
    9
    Ok i downloaded Prime95 and ran it for for a bit this is what i got



    Last edited by fyshawk; 05-08-2008 at 07:56 PM.
    Intel I7 950 / Water Cooling

    Asus Rampage III Formula Rog X58/3 x 1Tb hard drives

    12 gig Corsair Vengence 1600 3x4/SAphire 6970 2 gig

    Corsair 800D case /750AX Corsair PSU

    3x Samsung E2320 Lcds in Eyefinity

    http://imageshack.us/photo/my-images/687/img4950it.jpg/

  4. #4
    Xtreme Member
    Join Date
    Jan 2008
    Location
    Sweden
    Posts
    175
    What fan you got there mate? if it's the intel stock cooler its ok temps!
    24/7 Setup: Asus maximus x38 / E8500 E0 (500x8) Dtek Fuzion / Ballistix old rev 4-4-4-4 @ 1000MHz / 2900XT Ek fullcover cf / Silverstone TJ-07

    Bench: Commando / Tpower i45 / P5K / E8500 E0 @ http://valid.x86-secret.com/show_oc.php?id=433935 / modded mach2 r507 / Old rev ballistix /

  5. #5
    Registered User
    Join Date
    Apr 2008
    Posts
    9
    Thermalright Ultima-90 with a 92mm fan on it
    Intel I7 950 / Water Cooling

    Asus Rampage III Formula Rog X58/3 x 1Tb hard drives

    12 gig Corsair Vengence 1600 3x4/SAphire 6970 2 gig

    Corsair 800D case /750AX Corsair PSU

    3x Samsung E2320 Lcds in Eyefinity

    http://imageshack.us/photo/my-images/687/img4950it.jpg/

  6. #6
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    I would check the IHS of the CPU to see if it's flat, seems a tad on the high side for such a cooling setup... is the Ultima 90 also well fixed ? can you move it still a bit ? Which 92mm fan ?

    For the Aux readout don't worry, prolly speedfan error
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  7. #7
    Registered User
    Join Date
    Apr 2008
    Posts
    9
    I am using a new Zalmens 92mm ultra quiet led fan system temps after ajusting the heatsink and installing new fan



    Last edited by fyshawk; 05-09-2008 at 11:49 AM.
    Intel I7 950 / Water Cooling

    Asus Rampage III Formula Rog X58/3 x 1Tb hard drives

    12 gig Corsair Vengence 1600 3x4/SAphire 6970 2 gig

    Corsair 800D case /750AX Corsair PSU

    3x Samsung E2320 Lcds in Eyefinity

    http://imageshack.us/photo/my-images/687/img4950it.jpg/

  8. #8
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    If I was you I would try a 120mm fan as I thought you could mount that them too on the Ultra 90 models...
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  9. #9
    Registered User
    Join Date
    Apr 2008
    Posts
    9
    After 8 hours prime



    Last edited by fyshawk; 05-10-2008 at 05:32 AM.
    Intel I7 950 / Water Cooling

    Asus Rampage III Formula Rog X58/3 x 1Tb hard drives

    12 gig Corsair Vengence 1600 3x4/SAphire 6970 2 gig

    Corsair 800D case /750AX Corsair PSU

    3x Samsung E2320 Lcds in Eyefinity

    http://imageshack.us/photo/my-images/687/img4950it.jpg/

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •