looking nice littledevil
looking nice littledevil
Superb machining, I'm curious how will cu+al combo act on ln2? If I'm correct al will squize cu, did u left some space?
Born to overclock
The LN2, if used properly would only be in the base of a pot. So even if the copper base had the aluminium attatchment on, it would be no advantage.Originally Posted by Misko82
You do have to be cognoscente of dissimilar metals corrosion, especially copper and aluminum as they have different electro-chemical potential even @ no current. there are so many aluminum alloys and this subject is very complex I'll stop here,further studies recommended on your own.
The Laws of Thermodynamics say:
Zeroth Law: "You must play the game."
First Law: "You can't win."
Second Law: "You can't break even."
Third Law: "You can't quit the game."
Do you wanna Play Thermodynamics ????????I forgot "you must"
As with all your other work this looks beautiful also
U don't get it, I wanted to say, if al squize cu on sub zero maybe it could break or damage cu part or something similar.
Born to overclock
Guys i think, i will not have problems, there is also 0,5 - 1mm space for special washer and i have groove in both parts alu/cu for that washer.
I will test it next week and tell you results.
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Oh you mean where the two metals join, they might make one another brittle with the coldness and break? I doubt that would happen for several reasons, such as they aren't moving parts and you wouldn't dismantle them until you had finished benching, and let it warm back up. And also, don't forget k|ngp|n's dragon pot's use the same metals, and noone has had a problem with them
And then the 1 million dollar question: Will u be selling them?
Team Aero OC
Mybe i will, if you want to know more send me PM.
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Every container perform, but there is a question how good does it perform
I will test them this week, i will send some to bazx and he will make some tests.
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Pics mounting and issulation, waiting for stronger holddowns and metal backplate.
Best Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Every container perform, but there is a question how good does it perform
I will test them this week, i will send some to bazx and he will make some tests.
regards
i will have two chips ready QX6700 and X6800
and will try for some 3d as well with 8800GTX
Last edited by bazx; 02-11-2007 at 12:37 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Wow nice setup baz!
@ LittleDevil I see u are using butterfly screws, it's not good when u are using wider pots or thicker insulation, better use with regular nuts.
regards.
p.s. this is 60mm wide pot I guess?
Born to overclock
damn... very nice pots... i think you are in my head LD because i have the blueprints of some new pots at the machine shop and they are identical to yours except the screw alu body and the center pole version!
wtg!
OMG no back insulation for that poor GFX card!?!?i will have two chips ready QX6700 and X6800
and will try for some 3d as well with 8800GTX
Last edited by esdee; 02-11-2007 at 04:33 PM.
if this is your first night in xtremesystems,
you have to overclock.
It was only -4 degrees in his shed on that occasion so I don't think condensation was a problem
LittleDevil
What diameter a pipe used? And what height all design has turned out?
YGPM
AnsweredYGPMI got orings today, new pics tonight
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
i say that on our oc-lab forum but i say one more time...good job LD!
OC-Lab is no more...
Tnx for your support and so long!
R.I.P. www.oc-lab.com 18.02.2007
made by tiborrr...and that is true...
Thinking myself...Is it coming for Team Skootterit OC-weekend (16.-18.3) maybe?Cant wait, I think I will buy one pot from you
It could be more than NICE!!1 Those containers looks pretty "cool".
Last edited by Boble76; 02-13-2007 at 06:48 AM.
Finnish Overclocking Team
E6600 @ 100% OC with Co2 | FX57 SuperPi 8M @ 4min 5.281s
Abit IP35-Pro
E8500
XFX8800GTS (G92)
aXeRam 2Gb PC-6400
TT 750W
Auzen Prelude 7.1 X-Fi
TT Mozart |
Bloody hell!!! Look at that thread. Amazing workmanship LD. I think i defo need one of the coper pots and a SS unit from you! Has just got tbe done as they are not only full on function to the T and more but they are just bits of art.
Do you plan to be crafty and make something alone the same lines for GPU's too?
Thanks Pete, PM me and we can talk about CPU Pot and SS unit.
For GPU pots contact Shark-357, i will not make them right now. I think he can make you cu/alu GPU pot:http://www.xtremesystems.org/forums/...d.php?t=133215
Got orings and they fits pefrect
EDIT: Testing this weekend
regards
Last edited by LittleDevil; 02-13-2007 at 11:11 AM.
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN² Pots, LD GFX-R1 Dice/LN² Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Nice work man, as always
-------------------------------------------------------------------------------------------------------------------------------
3Dmark2006 Score Calculator
---------------------------
"Frequency Unlimit -Enabled'' by DFI
Posting Permissions
Reply With Quote
Bookmarks