Intel 65nm overclocking thread

[KingNothing]

Does your motherboard not give you any issues with the high fsb you are running it at?
And what is the "vmch" voltage option? What does it do?

[Unseen]

First boot on water On weekend the benchs
http://valid.x86-secret.com/show_oc?id=77677

[^don.k's^]

My 631 on warm air:

http://valid.x86-secret.com/show_oc?id=77761





Those CM are clocking like crazy... I hope it works good on dry ice the next weekend...

[M@T!Z]

Hi, I bought my cpu in TigerDirect, and it can this cooled by chiller(water-freon cooling). It is stable on 5.1GHz 1,5V the same cooled(prime and Super PI 32M). Motherboards without Vmods. Tomorrow me and Devil_K-ce are testing on Dry Ice. I hope on 6GHz (after Vmods).

Edit: New WR is this
Cooled by Raven 155's SS

[demek]

probably more to come in saturday :P

[Raiden Zero]

just a short question: does somebody know if theres a difference between abit aw8 and asus p5wd2 prem. considering max. oc?
just wondered because im getting an 920 that does 4,3ghz prime@1.35 cooled with boxed cooler but it was tested on p5wd2 prem.

[boostedevo]

My very first attempt at DI ever, using the Icepot that GHZ made on my 661. Going to either retry the 661 tonight or maybe give my 930 a shot

[demek]

new WR cedar mile? http://www.xtremesystems.org/forums/...ad.php?t=92212

[PcCI2iminal]

Going to either retry the 661 tonight or maybe give my 930 a shot

another 6ghz member
congrats
and can`t wait to see your 930 (100% OC?)

new WR cedar mile?

OMG this is the new WR

[PcCI2iminal]

Presler + 1900 Crossfire








i need a fresh install , new cats(6.1b in use) and a new PSU...Antec 550watts can`t handle 1900 Xfire + Presler @ xtreme OC

[boostedevo]

^^^ PC nice setup and nice scores. CF sucks in 3D01 though, run a single card on it and just clock the crap out of everything

and can`t wait to see your 930 (100% OC?)

Man, I hope. The 930 on the SS suicides just 200MHz shy of the 661 on the SS, so I it could be close. I am hoping it does a bit better on DI than the 661 does, but I think I am going to run the 661 again tonight to for a little better and if I have any DI left over, will do the 930 tomorrow or maybe next weekend. By then, maybe I'll have gotten brave enough to put the SS on the x1900

[DjLeco]

Hi, a simple question I have:
How can all of you, get some high FSB, more than 320?
I stacked at 300 FSB, even 1 Mhz more ,and I got the blue screen error...
Mi cpu is an PentiumD 930/air cooled by SCYTHE NINJA DUAL 120MM fan,.
Is about the cooling system(under 0 celsius degrees,vapo, cascade, etc),or that's my MB limits for 15X multiplier?
With my "old" PentiumD 830,cpu (on 930 I cannot set multi to 14X), with multi set to 14X I booted and finished SPI at 317 FSB
Thanks for U answers.

[hicookie]

Celeron now is 6G club~~~

[boostedevo]

25x multi? What kinda of cooling? That's amazing for a Celeron...excellent job!

[hicookie]

25x multi? What kinda of cooling? That's amazing for a Celeron...excellent job!

1.6V on vapochill LS.........think is time on ln2..later....

[boostedevo]

Dang, my 661 will only do 5.8GHz on a single stage. I guess all the low cache and FSB on the Celly helps it OC Man, that might be close to 7GHz on LN2...good luck with it!

[Byron]

PcCI2iminal ,
what sort of symptoms you have with the 550 antec power supply and you say it can't handle that setup? just curious

[PcCI2iminal]

PcCI2iminal ,
what sort of symptoms you have with the 550 antec power supply and you say it can't handle that setup? just curious

the Antec can handle very well my 24/7 sytem

2x raptor 10k rpm raid 0
2 x 250GB WD ATA 7200rpms for backup
2x dvd-rw
1 x 1900
air cooled Presler 4.2ghz @ 1.35v or 4.5ghz @ 1.5v
and 4.7ghz for benchs

but i tryed to run 3d03(gt1 error) and 06(cpu bench error) with stock CF and Presler @ 4.4-4.5ghz ,the Antec is holding me back for sure and i will try Enermax and Zippy and run the tests again

[Hazzan]

This my Cedarmill 631 with water coling, with ABIT AW8 MAX vcore 1.350volt

[kakaroto]

My 631 on warm air:

http://valid.x86-secret.com/show_oc?id=77761





Those CM are clocking like crazy... I hope it works good on dry ice the next weekend...

What is your stress temp?

[^don.k's^]

What is your stress temp?

What do you mean about it ? Full temp ? Reboot/shutdown temp ?

BTW it went as high as 70-72º before crash.

[PcCI2iminal]

PcCI2iminal ,
what sort of symptoms you have with the 550 antec power supply and you say it can't handle that setup? just curious

here a new check

Presler @ 4.25 @ 1.4v + Crossfire OC 690/800mhz with 2 hds




and 1.55v i lose score with drop @ 0.1v on 12v rail.

3d06
Presler @ 4.15 @ 1.4v = 1850
Presler @ 4.25ghz @ 1.55v = 1260

[boostedevo]

Still going strong there PcCI2iminal!

I've never seen anything as hot as this proc at this clock/Vc in my life. I tried everything to get those last 4-5FSB and it just wasn't happening. Temps took off like a rocket once I set the Vc. DI didn't have enough capacity to hold it Need like a 3-stage cascade at least or LN2 to bench this thing here...

[magnifico]

Hi,help me.

I have a 940 d @4400 vcore 1,475 and asus p5wd2 premium.


I wanted to know until that vcore I can be in day use with cooling to water,for day use.
Thanks

[Blacklash]

Guys if you were going to buy one of these chips to run on air which one would you grab?

Looks like to me the 631 and 930 are nice.

I am a tad bored and thinking about putting together an Intel rig again.