DOTHAN 780ES under LN2 action....MORE to come...

[MaSell]

Buhahaha 4.1GHz @ spi32M :|

you are really SICK (your cpu too )

[hipro5]

Buhahaha 4.1GHz @ spi32M :|

you are really SICK (your cpu too )

Just wait till I figure out how will I provide over 1.9VCore to this mobo and you'll se OVER 4250MHz Super-Pi 1M and ~4200MHz 32M......

[vapb400]

bahaha the unstoppable hipro!

[hipro5]

bahaha the unstoppable hipro!

I've already benched Super-Pi 1M @ 4180MHz......

[hipro5]

so you got more then 1.9v vcore?

Yes.....EXACTLY 1.91VCore....

[hipro5]

The Greek Xtreme Legend really break all the barriers and is now Olympus of Overclocking

Congratualtions my friend

Thank you very much my friend.......

[MaSell]

Hipro, what do you think about ~2.2v at dothan?

[hipro5]

Hipro, what do tou think about ~2.2v at dothan?

I've tested it up to 1.97VCore on P4GD1 mobo and it's doing OK.....

[skirms_fr]

@ 1.85 i can bench spi 1mo @ 3433 max

with 1.90 i can bench spi 1 mo @ 3469

but the max screen didnt change :p 3488

afraid increasing the vcore up around 1.95 1.97 on pm740

your 1.97 is under ln² or cascade ?

YGPM

[hipro5]

@ 1.85 i can bench spi 1mo @ 3433 max

with 1.90 i can bench spi 1 mo @ 3469

but the max screen didnt change :p 3488

afraid increasing the vcore up around 1.95 1.97 on pm740

your 1.97 is under ln² or cascade ?

YGPM

Under LN2....

[LenniZ]

Will you marry me?

lol, JK. Nice work

[railer]

lol this is frkn unbelivable. Unreal cpu speed Hipro
Big grats form NY

[duck]

congratulation！hipro
Also exceed the wall of 4400 at this tune.
Do I also pursue, if time is made?

[Waus-mod]

still love youre work... what an awesome benches you have there.. and 1.97v WTF

[hipro5]

Thank you guys.....

I came up with a conlusion last night as for the X1900XTX.....I gained about 40MHz more on Rams out of it(the same vga)......I have also tested another two of them till now but none of them could reach 776MHz core on air as is(default heatsink) as this one does, so as to put them under cascade and test them for cold bug.....

I did some mods on P4C800 mobo so as to trick it and give me more than 1.91VCore without rebooting but no go yet....I'll try to figure out what is stoping VCore and acts like this........It's realy a pain in the arss when your CPU wants more "food" and you ain't have enough to feed it......

I also "squeezed" it a bit without many tweaks and benched up here.....MORE to come for sure.....

[ex2cib]

nice hipro, are you ever going to do that aquamark run @ 4+ghz?

[hipro5]

nice hipro, are you ever going to do that aquamark run @ 4+ghz?

I did some testings last week, but when it reaches to it's end for showing the result, it crashes somehow......It's not the VGA(I have tested it and default), it's not the CPU or the rams(I have tested them on a lot lower frequency).......Something has to be with Aquamark.......I reinstalled it but same happens......I remember though that with the 7800GTX 512MB, I didn't encode such problems for the 143xxx score below 4GHz......

[STEvil]

there is a patch for pci-e cards for auquamark3... you need it or you will crash at the massive overdraw test.

If you guys know where the patch is, I need it too...

[Dumo]

Heres patch for AM3.....http://www.overclock.net/664693-post6.html

[nachthymnen]

Amazing scores Hipro!!!
No other to say...

[wowza]

Mobo has a "cold boot" problem at -155*C......After a restart we had to wait so as the temp goes up to -152*C so as to power up again....

Why can't my rig have that problem lol

[hipro5]

Why can't my rig have that problem lol

No cold boot problem any more as for the P4C800E-D......I think that feeding the DOTHAN with 1.9VCore, solved that......It now powers up at 1.44VCore and after that, it provides the setting that have been puted into bios(1.6V moded 1.9V)......Problem is that I'm still searching to find a way to feed it over 1.91VCore.......I though that the Northbridge chip couldn't handle the voltage, which also been feeden with 1.91Volts via VCore so I seperate it and I feed it with another DDR Maximizer of mine but no go.....Same thing happens......IF I don't find any solution about that any time soon, I'll be forced to feed the DOTHAN's core via another DDR Maximizer.......

[DaWaN]

No cold boot problem any more as for the P4C800E-D......I think that feeding the DOTHAN with 1.9VCore, solved that......It now powers up at 1.44VCore and after that, it provides the setting that have been puted into bios(1.6V moded 1.9V)......Problem is that I'm still searching to find a way to feed it over 1.91VCore.......I though that the Northbridge chip couldn't handle the voltage, which also been feeden with 1.91Volts via VCore so I seperate it and I feed it with another DDR Maximizer of mine but no go.....Same thing happens......IF I don't find any solution about that any time soon, I'll be forced to feed the DOTHAN's core via another DDR Maximizer.......

How many current can a DDR Maximizer handle ??? Dothan's aren't as power hungry as Prescott's but that will be alot more current than some DDR sticks. Anyway if it works, it'll be wicked cool And you are HiPro ....

[hipro5]

How many current can a DDR Maximizer handle ??? Dothan's aren't as power hungry as Prescott's but that will be alot more current than some DDR sticks. Anyway if it works, it'll be wicked cool And you are HiPro ....

It can handle up to 125Watts normal and 160Watts+ peak........

[DaWaN]

It can handle up to 125Watts normal and 160Watts+ peak........

That will be just enough