The Official Opteron 939 Overclocking Thread

**el rolio** · 10-17-2005, 03:07 PM

so lemme get thsi striaght as im about to do this tonight. i mount the storm block. check temps in bios.... then remount and remount until the idle temps are lowest kinda thing? then i know i have a good mount?

helps!

**dogsx2** · 10-17-2005, 03:09 PM

Originally Posted by Runner

www.monarchcomputer.com

They have 146 148 150 152 165 170 175 socket 939 opterons ALL in stock as of 1pm MST October 17th. I just ordered a 146.

So Dabney of Monarch purchasing dept. was telling the truth about my email.

http://www.xtremesystems.org/forums/...06#post1084206

**s0ulfly** · 10-17-2005, 03:12 PM

so this CABYE steeping does not suck like the CABGE's ?

i hope i can get one this time

**eva2000** · 10-17-2005, 03:15 PM

CABNE better than CABYE better than CABGE

**xenolith** · 10-17-2005, 03:19 PM

eva, nice efforts. You could always de-lid the thing and see what you get.

**Runner** · 10-17-2005, 03:52 PM

Originally Posted by gbomb944

Looks like they are the new packaging and I'm pretty sure the early ones will be in the old box. I was seriously thinking of getting one of 148's from ewiz just because the cabye's seem to be guaranteed 3ghz pwnage, 3.? on phase. I figure it's bound to do 2.7 or 8. OC'ing is luck anyway unless you want to buy chip after chip an pray for a good one.

Have a feeling they just reused the pic's from the S940 versions for these

**gundamit** · 10-17-2005, 04:04 PM

Wow. Monarch has the 146 still in stock. Couldn't help but pull the trigger on another. Might end up being a Xmas gift.

**Nem** · 10-17-2005, 04:10 PM

I've got a 146 on order from CPU City for delivery after the 19th, and have also ordered a 148 from Komplett last night, should be here tomorrow.

Komplett have the 148 at Â£199 inclusive which is Â£30 cheaper than CPU City on the same item so couldn't help myself. They have 2 left in stock but it does not say which stepping, I'll post what I get tomorrow.

Nick (with a feeling the 2 left in stock at Komplett are about to sell out)

**dogsx2** · 10-17-2005, 04:18 PM

Originally Posted by gundamit

Wow. Monarch has the 146 still in stock. Couldn't help but pull the trigger on another. Might end up being a Xmas gift.

Bah,

you should have bought a 150 so then you would only have one more to buy for a (edit per gun) straight flush.

**Tamille** · 10-17-2005, 04:23 PM

Originally Posted by dogsx2

Bah,

you should have bought a 150 so then you would only have one more to buy for a full house.

cool wish i had 142,144,146,148,150,152,154 opterons. now that would be sweet.

**gbomb944** · 10-17-2005, 04:36 PM

Originally Posted by Runner

Have a feeling they just reused the pic's from the S940 versions for these

Could be, I guess we'll have to wait and see. I read somewhere that AMD was switching over to that style for everything. Also eliminating oem chips since too many are being sold not built into systems. Kind of sucks if you don't want the fan. Some guys will have like a hundred fans.

**gundamit** · 10-17-2005, 04:37 PM

Originally Posted by dogsx2

Bah,

you should have bought a 150 so then you would only have one more to buy for a full house.

I think you mean straight flush, but point taken.

**eva2000** · 10-17-2005, 04:43 PM

Not stable but just playing around

**gbomb944** · 10-17-2005, 04:53 PM

I can't wait to see some of dual core clocks. I would've liked to get one but alas not in the budget.

**eva2000** · 10-17-2005, 05:40 PM

bit more voltage for 1M with ram at DDR655

Sandra = 8141/8042

**gbomb944** · 10-17-2005, 06:13 PM

Yours is a cabge with 2x256 eva?

**dinos22** · 10-17-2005, 06:51 PM

Originally Posted by gbomb944

Yours is a cabge with 2x256 eva?

it's CABYE 0536GPMW

**eva2000** · 10-17-2005, 07:02 PM

no Opteron 144 CABYE 0536 GPMW

**dogsx2** · 10-17-2005, 07:23 PM

Is there anywhere to still download Lightwork? Off topic, but.

**rise4310** · 10-17-2005, 07:58 PM

Originally Posted by mongoled

Yup mine is 67C also.

Just something which I have mentioned be4 something I think is relevant because alot of the talk here is abt wht vCore a particular chip needs to get a certain mhz.

Its no good saying

'woot, im using 1.45v for 3Ghz stable'

if in reallity your vCore is 1.52v. Why I say this? Well my Ultra-D overvolts between 0.04-0.07v depending on the setting chosen in bios. Another member who posted in this thread (soz cant remember name) also said their DFI overvolts by abt 0.07v, now these are quite large differences from bios reading and mulitmeter reading points.

If their is going to be any chance of correlating data to find if MaxTCase has any real meaning then 'real' vCore needs to be taken into account!!

amen to that. every dfi nf4 (sli-dr and ultra-d's) i've had/have reads .06-.07 lower in windows and .04 lower in bios than what i actually set.

i think ut would be more accurate if people would state what they actually are setting.

**sierra_bound** · 10-17-2005, 08:17 PM

Originally Posted by dogsx2

Is there anywhere to still download Lightwork? Off topic, but.

Try the second link in this post.

http://xtremesystems.org/forums/show...21&postcount=1

**el rolio** · 10-17-2005, 09:47 PM

ok. priming now for burn in at 290x10 with bios setting 1.45v+5% ~ 1.5ish and 166 mem divider to be safe

its HOT! hopefully the burn in helps some

this is on my 0530 cabne opterown 146

**ken** · 10-17-2005, 09:53 PM

My best so far :| its an 144, CABYE 0536 GPMW

**dinos22** · 10-17-2005, 10:00 PM

looking good....same as mine except the time you got is on the slow side

what are you benching 32M at

**ken** · 10-17-2005, 10:02 PM

Originally Posted by dinos22

looking good....same as mine except the time you got is on the slow side

what are you benching 32M at

yeah, my memory sux

btw, highest stable@SP32M is 325x9 , havent tried higher as Im working on 3Ghz :p

Thread: The Official Opteron 939 Overclocking Thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions