P8P67 Pro bios update problem...*fixed*

[deathelement]

Hi, my Asus board has been fine with the 0402 BIOs that it shipped with and I've been running 4.5GHz @ 1.29v just fine but with any new BIOs, I can only boot up in stock/auto mode.

0804:For some reason, when I flash to 0804 and start up, it's fine. But when I change anything to my desired settings (overclocking), the computer doesn't actually do it and instead uses OC Tuner as it turns off and on until the result is always 103 x 34. That's all that BIOs does for me. I had to clear CMOs and change BIOs.

new 1053 BIOs: This doesn't even work as 0804 actually let me boot up with the crappy OC Tuner settings...the computer will boot with stock settings (nothing changed in BIOs) but if I change anything in BIOs to overclock with (i.e. raising voltage or multi), the computer won't boot. It goes into a continuous loop at start up. All I see on the board are the LEDs flashing in the sequence and ending. The red LEDs go from graphics->RAM-> CPU ->graphics -> RAM -> CPU and computer turns off when it reaches CPU a second time immediately. It then turns off and turns on -> repeat the loop above to no end. Nothing ever comes up on screen. It's frustrating to have to clear CMOs every time to boot trying to diagnose the problem.

Is there any setting in BIOs that could be triggering this problem?